Project-Oriented Practical CourseModule description #40655 / Version 8
- 6 CP
- Portfolio examination
- Ungraded
- Winter and summer semester
- German
This module description is not valid in the current semester (Winter semester 2026/27).
Current version (v10)
| Module / Version | #40655 / #8 |
|---|---|
| Validity | Summer semester 2024 – Summer semester 2024 |
| Available language(s) | German |
| Credit points | 6 |
| Person responsible for the module | Gerfers, Friedel |
| Grading | Ungraded |
| Exam format | Portfolio examination |
| Language(s) of instruction | German |
Affiliation
| Faculty | Fakultät IV |
|---|---|
| Institute | Institut für Hochfrequenz und Halbleiter-Systemtechnologien |
| Academic chair | 34321200 FG Hochfrequenzsysteme (HFS) |
Contact
| Office | HFT 1-1 |
|---|---|
| Contact person | Ali, Kussai Elfares Mohamed Osman |
| E-mail address | k.ali@tu-berlin.de |
| Website | https://www.tu.berlin/hfs |
Learning outcomes
The students have the following skills:
• Analytical and methodical skills as well as methods for autonomous planing, organization, and documentation of projects.
• Fundamental knowledge of electronic and digital basic circuits.
• Synthesis between learned component theory and practical application.
• Applying the studied theory to analog and digital circuits, including circuit design, setup, analysis and simulation.
• Hands-on experience with analog and digital circuits as well as the necessary measurement equipment.
• Fundamentals of scientific documentation of their own work.
• Presentation of their own work.
• Teamwork.
• Awareness of the necessity of independent study and acting responsibly.
• Analytical and methodical skills as well as methods for autonomous planing, organization, and documentation of projects.
• Fundamental knowledge of electronic and digital basic circuits.
• Synthesis between learned component theory and practical application.
• Applying the studied theory to analog and digital circuits, including circuit design, setup, analysis and simulation.
• Hands-on experience with analog and digital circuits as well as the necessary measurement equipment.
• Fundamentals of scientific documentation of their own work.
• Presentation of their own work.
• Teamwork.
• Awareness of the necessity of independent study and acting responsibly.
Content
• Methodical knowledge inf form of planing and organizing projects (timetables, milestones, dividing the task in work packets, interfaces).
• Technical knowledge in form of project-referenced reports or student workshops.
• Fundamental practical skills needed to realize and use an electronic analog/digital circuit (including circuit design, analysis, setup and test).
• Documentation and presentation of one's own work (logs, final presentations, final reports, handouts).
• Elaboration of basic knowledge with computer-aided circuit- and component simulation, and documentation thereof.
• Simulated observation of various components at different voltages and environmental influences.
• Composing and digitizing a circuit layout under formal constraints.
• Solving issues as a team.
The course also deals with the topics of societal responsibility and sustainability, e.g. technology assessment, most notably:
- problem and practical relevance
- future relevance and reflexivity
- normativity and sustainability
- inter- and transdisciplinarity
• Technical knowledge in form of project-referenced reports or student workshops.
• Fundamental practical skills needed to realize and use an electronic analog/digital circuit (including circuit design, analysis, setup and test).
• Documentation and presentation of one's own work (logs, final presentations, final reports, handouts).
• Elaboration of basic knowledge with computer-aided circuit- and component simulation, and documentation thereof.
• Simulated observation of various components at different voltages and environmental influences.
• Composing and digitizing a circuit layout under formal constraints.
• Solving issues as a team.
The course also deals with the topics of societal responsibility and sustainability, e.g. technology assessment, most notably:
- problem and practical relevance
- future relevance and reflexivity
- normativity and sustainability
- inter- and transdisciplinarity
Module components
Compulsory area
The following courses are mandatory for this module:
| Courses | Type | Number | Frequency | Language | Hours per week | Course catalog |
|---|---|---|---|---|---|---|
| Projektorientiertes Praktikum (FG Mixed Signal Circuit Design) | Project | 0430 L 120 | Winter and summer semester | [de] | 6 | ISIS |
Workload and credit points
Projektorientiertes Praktikum (FG Mixed Signal Circuit Design) (Project)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Erbringung der Prüfungsleistungen | 1 | 40 h | 40 h |
| Präsenszeit | 15 | 6 h | 90 h |
| Vor- und Nachbereitung | 1 | 50 h | 50 h |
| 180 h | |||
The workload of the module adds up to 180 hours. The module therefore comprises 6 credit points.
Description of teaching and learning methods
Grundlegende praktische Fähigkeiten und Basiswissen werden in studentischen Vorträgen / Workshops vermittelt und von den Studierenden eigenständig vertieft. Die Teilnehmenden und die Betreuer schlagen Projekte vor, von denen die Studierenden eines auswählen und in mehreren Teilgruppen, die jeweils einen eigenständigen Teil des Gesamtprojektes entwickeln, selbstständig bearbeiten.
Requirements for participation and examination
Desirable prerequisites for participation in the courses:
• Wissen aus den Modulen der ersten drei Semester des Grundstudiums (insb. Grundl. d. Elektrotechnik, Grundl. d. elektrischen Messtechnik, Elektrische Netzwerke, Halbleiterbauelemente)
• Grundlegendes Wissen für den Umgang mit Labormessgeräten (insb. Strom-/Spannungsmessgeräte, Oszilloskop)
Vorteilhaftes Vorwissen:
• Kenntnisse im Umgang mit Operationsverstärkern und Bipolar-/Feldeffekttansistoren
• Erfahrung bei der Entwicklung Controllergestützter Anwendungen
• Grundlegende LaTeX-Kenntnisse
• Grundlegendes Wissen für den Umgang mit Labormessgeräten (insb. Strom-/Spannungsmessgeräte, Oszilloskop)
Vorteilhaftes Vorwissen:
• Kenntnisse im Umgang mit Operationsverstärkern und Bipolar-/Feldeffekttansistoren
• Erfahrung bei der Entwicklung Controllergestützter Anwendungen
• Grundlegende LaTeX-Kenntnisse
Mandatory requirements for the module examination registration:
This module has no examination requirements.
Completion of the module
| Grading | Ungraded |
|---|---|
| Exam format | Portfolio examination |
| Type of portfolio examination | 100 points in total |
| Language | German |
Test elements
| Name | Points/Weight | Category | Duration/Extent |
|---|---|---|---|
| (Ergebnisprüfung) Ausarbeiten und halten eines Referates mit Handout | 10 | flexibel | 20 Minuten Referat und Diskussion + Vorbereitungszeit |
| (Ergebnisprüfung) Erstellen einer funktionierenden Platine | 20 | practical | Gruppenarbeit an 3 Terminen je 4h |
| (Ergebnisprüfung) Erstellen eines Testaufbaus oder einer Testumgebung | 10 | practical | Gruppenarbeit an 2 Terminen je 4h |
| (Ergebnisprüfung) Wissenschaftliche Dokumentation (Abschlussbericht) | 20 | written | Gruppenarbeit 80 Seiten |
| (Lernprozessevaluation) Erstellen und Dimensionieren eines Schaltplans | 10 | practical | Gruppenarbeit an 2 Terminen je 4h |
| (Lernprozessevaluation) Kleingruppenarbeit | 10 | practical | Präsenzzeit im Labor (zu jedem Labortermin) |
| (Lernprozessevaluation) Projektmanagement | 10 | practical | 3 Stunden |
| (Lernprozessevaluation) Schaltungssimulation oder lauffähiger Programmcode | 10 | practical | Gruppenarbeit an 2 Terminen je 4h |
Exam description
Scientific documentation (final report)
Preparing and giving a presentation with handout
Creating a working circuit board
Creating a test setup or test environment
Creating and dimensioning a circuit
Circuit simulation or executable program code
Teamwork in small groups
Project Management:
- Planning and organizing project specific interfaces
- Planning and building a case
- Procurement of components and materials
- Presenting group work at various group meetings
- Organizing interim and final reports
Preparing and giving a presentation with handout
Creating a working circuit board
Creating a test setup or test environment
Creating and dimensioning a circuit
Circuit simulation or executable program code
Teamwork in small groups
Project Management:
- Planning and organizing project specific interfaces
- Planning and building a case
- Procurement of components and materials
- Presenting group work at various group meetings
- Organizing interim and final reports
Duration of the module
The following number of semesters is estimated for taking and completing the module: 1 semester(s).
This module can be started in the following semesters: Winter and summer semester.
Maximum number of participants
This module is not limited to a number of students.
Registration procedures
Due to limited places, registration is required in advance. All relevant information on this and the first event can be found at: https://www.tu.berlin/msc in the section Study and Teaching.
Recommended reading, lecture notes
Lecture notes
unavailable
Electronic lecture notes
unavailable
Recommended literature
No recommended literature given
Assigned programs
This module version is used in the following programs:
| Program / program version | Semester(s) | Curriculum component |
|---|---|---|
| Industrial Engineering and Management Industrial Engineering and Management (B. Sc.) - StuPO 2015 | SS 2024 | Ingenieurwissenschaftliche Studienrichtungen › Elektrotechnik (ET) › Elektrotechnik (Wahlpflicht) |
Miscellaneous
Not specified