Skip to content
Technische Universität Berlin Deutsch
Course catalog and module transfer system

Control Systems AModule description #40677 / Version 3

← Module page Deutsche Fassung
This module description is not valid in the current semester (Winter semester 2026/27).
Module / Version#40677 / #3
ValidityWS 2015/16 – WS 2015/16
Available language(s)German
Credit points12
Person responsible for the moduleRaisch, Jörg
GradingGraded
Exam formatPortfolio examination
Language(s) of instructionGerman

Affiliation

FacultyFakultät IV
InstituteInstitut für Energie und Automatisierungstechnik
Academic chair34311800 FG Regelungssysteme (Control Systems)

Contact

OfficeEN 11
Contact personNot specified
E-mail addressraisch@control.tu-berlin.de
Websitehttp://www.control.tu-berlin.de

Learning outcomes

After completion of this module, the students will be proficient in fundamental methods of modelling and analysis of dynamical systems as well as in control design methods. In particular, a thorough review of multivariable control systems is given. The taught methods are applied to example systems using numerical software tools. The variety of compulsory optional module components offers further education in both application-focused subjects as well as in subjects focusing on theory and methods.

Content

The focus is on modern control system methods as well on application of these methods to practical automation problems. In the compulsory part, we teach analysis and design methods for multivariable control systems, both in the time domain and the frequency domain. In the compulsory optional part, the students may focus on nonlinear control systems, discrete event systems, hybrid systems, stochastic systems, or on system identification and control in medical engineering. A list of other possible courses is shown below. Students can form teams and make use of the acquired competencies in various lab classes or in the Project Lab Automation.

Module components

Compulsory area

The following courses are mandatory for this module:

CoursesTypeNumberFrequencyLanguageHours per weekCourse catalog
MehrgrößenregelsystemeIntegrated course0430 L 052 Summer semester–4 ISIS

Compulsory elective area

A selection of the following courses must be completed:

CoursesTypeNumberFrequencyLanguageHours per weekCourse catalog
Ereignisdiskrete SystemeIntegrated course0430 L 023 Summer semester–4 ISIS
Entwurf und Regelung bionischer RoboterIntegrated course0430 L 094 Summer semester–2 ISIS
Hybride SystemeIntegrated course0430 L 075 Winter semester–4 ISIS
Nichtlineare RegelsystemeIntegrated course0430 L 060 Winter semester–4 ISIS
Projektpraktikum AutomatisierungProject0430 L 032 Winter and summer semester–4 ISIS
Stochastic SystemsIntegrated course0430 L 095 Winter semester–4 ISIS
Systemidentifikation und Regelung in der MedizinIntegrated course0430 L 025 Summer semester–4 ISIS
Theory of Optimal ControlIntegrated course0430 L 034 Summer semester–2 ISIS

Courses in the course catalog

Courses created from the teaching units of this module.

Winter semester 2026/27 (2)

Mehrgrößenregelsysteme (Integrated course) 1

All groups of this course in the catalog

Ereignisdiskrete Systeme (Integrated course) 1

All groups of this course in the catalog

Workload and credit points

Mehrgrößenregelsysteme (Integrated course)

Workload descriptionMultiplierHoursTotal
Präsenzzeit154 h60 h
Vor-/Nachbereitung154 h60 h
Vorbereitung für Prüfungen154 h60 h
180 h

Ereignisdiskrete Systeme (Integrated course)

Workload descriptionMultiplierHoursTotal
Präsenzzeit154 h60 h
Vor-/Nachbereitung154 h60 h
Vorbereitung für Prüfungen154 h60 h
180 h

Entwurf und Regelung bionischer Roboter (Integrated course)

Workload descriptionMultiplierHoursTotal
Präsenzzeit152 h30 h
Vor-/Nachbereitung154 h60 h
90 h

Hybride Systeme (Integrated course)

Workload descriptionMultiplierHoursTotal
Präsenzzeit154 h60 h
Vor-/Nachbereitung154 h60 h
Vorbereitung für Prüfungen154 h60 h
180 h

Nichtlineare Regelsysteme (Integrated course)

Workload descriptionMultiplierHoursTotal
Präsenzzeit154 h60 h
Vor-/Nachbereitung154 h60 h
Vorbereitung für Prüfungen154 h60 h
180 h

Projektpraktikum Automatisierung (Project)

Workload descriptionMultiplierHoursTotal
Präsenzzeit154 h60 h
Vor-/Nachbereitung154 h60 h
Vorbereitung für Prüfungen154 h60 h
180 h

Stochastic Systems (Integrated course)

Workload descriptionMultiplierHoursTotal
Präsenzzeit154 h60 h
Vor-/Nachbereitung1512 h180 h
240 h

Systemidentifikation und Regelung in der Medizin (Integrated course)

Workload descriptionMultiplierHoursTotal
Präsenzzeit154 h60 h
Vor-/Nachbereitung154 h60 h
Vorbereitung für Prüfungen154 h60 h
180 h

Theory of Optimal Control (Integrated course)

Workload descriptionMultiplierHoursTotal
Präsenzzeit152 h30 h
Vor-/Nachbereitung154 h60 h
90 h

The workload of the module adds up to 1500 hours. The module therefore comprises 12 credit points.

Description of teaching and learning methods

Integrierte Veranstaltungen, ein Seminar und ein Projekt.
Die Lehrveranstaltungen „Stochastic Systems“ und "Theory of Optimal Control" finden in englischer Sprache statt.

Requirements for participation and examination

Desirable prerequisites for participation in the courses:

Es werden Kenntnisse des Bachelor-Moduls „Regelungstechnik“ (kontinuierliche Standardregelkreise) oder äquivalente Vorkenntnisse vorausgesetzt.

Mandatory requirements for the module examination registration:

This module has no examination requirements.

Completion of the module

GradingGraded
Exam formatPortfolio examination
LanguageGerman

Test elements

NamePoints/WeightCategoryDuration/Extent
Mehrgrößenregelsysteme50
Prüfungselement aus Wahlpflichtveranstaltung(en)50

Exam description

Die Portfolioprüfung dieses Modul setzt sich aus einem schriftlichen Test (37.5 Portfoliopunkte) sowie einer protokollierten praktischen Leistung (12.5 Portfoliopunkte) im Fach „Mehrgrößenregelsysteme" und den unten aufgelisteten Prüfungselementen aus dem (der) gewählten Wahlpflicht-Lehrveranstaltung(en) zusammen.

Die Leistung der integrierten Lehrveranstaltung „Nichtlineare Regelsystem“ wird in Form von zwei protokollierten praktischen Leistungen (Computersimulationen) mit je 8 Portfoliopunkten und einem schriftlichen Test mit 34 Portfoliopunkten erbracht.

Die Leistung der Veranstaltung „Hybride Systeme" wird in Form von zwei mündlichen Rücksprachen (je 25 Portfoliopunkte) erbracht.

Die Leistung der Veranstaltung „Ereignisdiskrete Systeme" wird in Form von einem schriftlichen Test (37.5 Portfoliopunkte) sowie einer protokollierten praktischen Leistung (12.5 Portfoliopunkte) erbracht.

Die Leistung der integrierten Lehrveranstaltung „Systemidentifikation und Regelung in der Medizin“ wird in Form von zwei protokollierten praktischen Leistungen (Computersimulationen) mit je 8 Portfoliopunkten und einer Rücksprache mit 34 Portfoliopunkten erbracht.

Die Leistung des Projektpraktikums „Automatisierung“ wird in Form einer protokollierten praktischen Leistung (40 Portfoliopunkte; selbständige Bearbeitung einer Problemstellung im Team), einer Präsentation (5 Portfoliopunkte) sowie einer Rücksprache (5 Portfoliopunkte) erbracht.

Die Leistung der Veranstaltung „Stochastic Systems" wird in Form einer mündlichen Rücksprache erbracht, welche mit 50 Portfoliopunkten gewichtet wird.

Die Leistung der Veranstaltung „Entwurf und Regelung bionischer Roboter" wird in Form einer mündlichen Rücksprache erbracht, welche mit 25 Portfoliopunkten gewichtet wird.

Die Leistung der Veranstaltung „Theory of Optimal Control" wird in Form einer mündlichen Rücksprache erbracht, welche mit 25 Portfoliopunkten gewichtet wird.

Die Gesamtnote gemäß § 47 (2) AllgStuPO wird nach dem Notenschlüssel 3 der Fakultät IV ermittelt.

Duration of the module

The following number of semesters is estimated for taking and completing the module: 2 semester(s).

This module can be started in the following semesters: Winter and summer semester.

Maximum number of participants

This module is not limited to a number of students.

Registration procedures

Das Modul wird über QisPos angemeldet.

Details zur Anmeldung zu den Prüfungsleistungen werden jeweils rechtzeitig im Internet (www.control.tu-berlin.de) und durch Aushang vor dem Sekr. EN 11 (Raum EN 237) bekannt gegeben.

Recommended reading, lecture notes

Lecture notes

unavailable

Electronic lecture notes

available – http://www.control.tu-berlin.de

Recommended literature

No recommended literature given

Assigned programs

This module is not used in any program.

Masterstudiengang Elektrotechnik, Studienschwerpunkt Automatisierungstechnik
Masterstudiengang Automotive Systems
Masterstudiengang Technische Informatik (StO/PO 2012):
• Studienschwerpunkt Automatisierungstechnik (Control Systems; Elektrotechnik oder Technische Informatik)
• Studienschwerpunkt Kognitive Systeme (Cognitive Systems and Robotics; Informatik)
Masterstudiengang Wirtschaftsingenieurwissenschaften (mit Ingenieurswissenschaft Elektrotechnik).
Bei ausreichenden Kapazitäten auch als Wahlmodul in anderen Studiengängen wählbar.

Miscellaneous

Falls bereits fundierte Kenntnisse auf dem Gebiet der Mehrgrößenregelsysteme vorliegen, kann die Pflichtlehrveranstaltung durch Veranstaltungen aus dem Wahlbereich ersetzt werden. Die Kenntnisse müssen vom Verantwortlichen für das Modul anerkannt werden.

Die Teilnehmerzahlen beim Projektpraktikum sind begrenzt.

Mehrgrößenregelsysteme:
[1] Lunze, J.: Regelungstechnik 2: Mehrgrößensysteme, Digitale Regelung, Springer, 2008.
[2] Raisch, J.: Mehrgrößenregelungen im Frequenzbereich, Oldenbourg, 1994, (online auf http://www.control.tu-berlin.de verfügbar).
[3] Kailath, T.: Linear Systems, Prentice Hall, 1980.
[4] Green, M.; Limebeer, D.: Linear Robust Control, Prentice Hall, 1994.
[5] Anderson, B.; Moore, J.: Optimal Control: Linear Quadratic Methods, Prentice Hall, 1990.
[6] Maciejowski, J.: Multivariable Feedback Design, Addison Wesley, 1989.
[7] Bryson, A.; Ho Y.: Applied Optimal Control: Optimization, Estimation and Control, Taylor & Francis Inc, 1988.

Nichtlineare Regelsysteme:
[1] Glad, T., Ljung, L.: Control Theory: Multivariable and Nonlinear Methods, Taylor & Francis, 2000.
[2] Marquez, H. J.: Nonlinear Control Systems, Analysis and Design, Wiley-Interscience, 2003.
[3] Friedland, B.: Advanced Control System Design, Prentice Hall, 1996.
[4] Khalil, H. K.: Nonlinear Systems, Prentice-Hall, 2002.
[5] Isidori, A.: Nonlinear Control Systems, Springer, 1995.
[6] Slotine, J.-J. E., Li, W.: Applied Nonlinear Control, Prentice Hall, 1991.
[7] Maciejowski, J.: Predictive Control with Constraints, Prentice Hall, 2002
[8] Unbehauen, H.: Regelungstechnik II, Vieweg, 2000.

Hybride Systeme:
[1] Goebel, R., Sanfelice, R., Teel, A.: Hybrid Dynamical Systems, IEEE Control Systems Magazine, Vol. 29, 2, pp. 28-93, 2009.
[2] Liberzon, D.: Switching in Systems and Control, Birkhäuser, 2003.
[3] Lunze, J.: Lamnabhi-Lagarrigue, F.(eds.): Handbook of Hybrid Systems Control, 2009

Ereignisdiskrete Systeme:
[1] Cassandras, C.G.; Lafortune, S.: Introduction to Discrete Event Systems, Springer, 2007.
[2] Kiencke, U.: Ereignisdiskrete Systeme: Modellierung und Steuerung verteilter Systeme, Oldenbourg, 1997.
[3] Murata, T.: Petri Nets: Properties, Analysis and Applications, Proceedings of the IEEE, Vol. 77, No. 4,1989.
[4] Lunze, J.: Ereignisdiskrete Systeme, Oldenbourg, 2006.
[5] Reisig, W.: Petri Nets: An Introduction, Springer, 1985.
[6] Wonham, W.H.: Supervisory Control of Discrete-Event Systems, © W.H. Wonham, University of Toronto

Systemidentifikation und Regelung in der Medizin:
[1] Ikonen, E., Najim, K.: Advanced Process Identification and Control, Marcel Dekker, Inc., 2002.
[2] Westerwick, D. T., Kearney, R. E.: Identification of Nonlinear Physiological Systems, Wiley Interscience, 2003.
[3] Nelles, O.: Nonlinear System Identification, Springer, 2001.
[4] Landau, I. D., Zito, G.: Digital Control Systems: Design, Identification and Implementation , Springer, 2006.
[5] Aström, K., Wittenmark, A.: Computer-Controlled Systems: Theory und Design, Prentice Hall, 1997.
[6] Ljung, L.: System Identification: Theory for the Users, Prentice Hall, 1999.
[7] Maciejowski, J.: Predictive Control with Constraints, Prentice Hall, 2002.

Stochastic Systems:
[1] Grimmett, G., Stirzaker R.: Probability and Random Processes, Oxford University Press, 2003.
[2] Durrett, R.: Probability, Theory and Examples, Duxbury Press, 1996.
[3] Maybeck, P.: Stochastic Models, Estimation, and Control, Volume 1, Academic Press, Inc 2001
[4] Honerkamp, Stochastic Dynamical Systems, VCH, Weinheim, 1994
[5] Puterman, M. L.: Markov Decision Processes. Wiley, 1994.
[6] Gardiner, C.: Stochastic Methods, A Handbook for the Natural and Social Sciences, Springer Verlag, Berlin, 2009
[7] Papoulis, A.; Pillai S.U.: Probability, Random Variables and Stochastic Processes, McGraw Hill, 2002
[8] Arnold, Ludwig: Random dynamical systems. (English) Springer Monographs in Mathematics, Berlin: Springer (1998).
[9] Durrett, Richard: Stochastic calculus. A practical introduction. (English) Probability and Stochastics Series. Boca Raton, FL: CRC Press (1996).
[10] Risken, H: The Fokker-Planck Equation. Methods of Solution and Applications. Springer Verlag, Berlin, 1989