Control Systems AModule description #40677 / Version 4
- 12 CP
- Portfolio examination
- Graded
- Winter and summer semester
- German
This module description is not valid in the current semester (Winter semester 2026/27).
| Module / Version | #40677 / #4 |
|---|---|
| Validity | SS 2016 – SS 2017 |
| Available language(s) | German |
| Credit points | 12 |
| Person responsible for the module | Raisch, Jörg |
| Grading | Graded |
| Exam format | Portfolio examination |
| Language(s) of instruction | German |
Affiliation
| Faculty | Fakultät IV |
|---|---|
| Institute | Institut für Energie und Automatisierungstechnik |
| Academic chair | 34311800 FG Regelungssysteme (Control Systems) |
Contact
| Office | EN 11 |
|---|---|
| Contact person | Not specified |
| E-mail address | raisch@control.tu-berlin.de |
| Website | http://www.control.tu-berlin.de |
Learning outcomes
After completion of this module, the students will be proficient in fundamental methods of modelling and analysis of dynamical systems as well as in control design methods. In particular, a thorough review of multivariable control systems is given. The taught methods are applied to example systems using numerical software tools. The variety of elective module components provides further knowledge in both application-focused subjects as well as in subjects focusing on theory and methods.
Content
The focus is on modern control system methods as well on application of these methods to practical automation problems. In the elective part, we teach analysis and design methods for multivariable control systems, both in the time domain and the frequency domain. In the compulsory optional part, the students may focus on nonlinear control systems, discrete event systems, hybrid systems, or on system identification and control in medical engineering. A list of other possible courses is shown below. Students can form teams and make use of the acquired competencies in various lab classes or in the Project Lab Automation.
Module components
Compulsory area
The following courses are mandatory for this module:
| Courses | Type | Number | Frequency | Language | Hours per week | Course catalog |
|---|---|---|---|---|---|---|
| Mehrgrößenregelsysteme | Integrated course | 0430 L 052 | Winter and summer semester | – | 4 | WS 2026/27 (1) ISIS |
Compulsory elective area
A selection of the following courses must be completed:
| Courses | Type | Number | Frequency | Language | Hours per week | Course catalog |
|---|---|---|---|---|---|---|
| Ereignisdiskrete Systeme | Integrated course | 0430 L 023 | Winter and summer semester | – | 4 | WS 2026/27 (1) ISIS |
| Hybride Systeme | Integrated course | 0430 L 075 | Winter semester | – | 4 | ISIS |
| Nichtlineare Regelsysteme | Integrated course | 0430 L 060 | Winter semester | – | 4 | ISIS |
| Projektpraktikum Automatisierung | Project | 0430 L 032 | Winter and summer semester | – | 4 | ISIS |
| Systemidentifikation und Regelung in der Medizin | Integrated course | 0430 L 025 | Summer semester | – | 4 | ISIS |
Courses in the course catalog
Courses created from the teaching units of this module.
Winter semester 2026/27 (2)
Mehrgrößenregelsysteme (Integrated course) 1
- Multivariable Control Systems (Integrierte Veranstaltung) Termingruppe 1 0430 L 052
Ereignisdiskrete Systeme (Integrated course) 1
- Discrete Event Systems (Integrierte Veranstaltung) Termingruppe 1 0430 L 023
Workload and credit points
Mehrgrößenregelsysteme (Integrated course)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Präsenzzeit | 15 | 4 h | 60 h |
| Vor-/Nachbereitung | 15 | 4 h | 60 h |
| Vorbereitung zur Prüfung | 15 | 4 h | 60 h |
| 180 h | |||
Ereignisdiskrete Systeme (Integrated course)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Präsenzzeit | 15 | 4 h | 60 h |
| Vor-/Nachbereitung | 15 | 4 h | 60 h |
| Vorbereitung zur Prüfung | 15 | 4 h | 60 h |
| 180 h | |||
Hybride Systeme (Integrated course)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Präsenzzeit | 15 | 4 h | 60 h |
| Vor-/Nachbereitung | 15 | 4 h | 60 h |
| Vorbereitung für Prüfungen | 15 | 4 h | 60 h |
| 180 h | |||
Nichtlineare Regelsysteme (Integrated course)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Präsenzzeit | 15 | 4 h | 60 h |
| Vor-/Nachbereitung | 15 | 4 h | 60 h |
| Vorbereitung für Prüfungen | 15 | 4 h | 60 h |
| 180 h | |||
Projektpraktikum Automatisierung (Project)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Präsenzzeit | 15 | 4 h | 60 h |
| Vor-/Nachbereitung | 15 | 4 h | 60 h |
| Vorbereitung für Prüfungen | 15 | 4 h | 60 h |
| 180 h | |||
Systemidentifikation und Regelung in der Medizin (Integrated course)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Präsenzzeit | 15 | 4 h | 60 h |
| Vor-/Nachbereitung | 15 | 4 h | 60 h |
| Vorbereitung für Prüfungen | 15 | 4 h | 60 h |
| 180 h | |||
The workload of the module adds up to 1080 hours. The module therefore comprises 12 credit points.
Description of teaching and learning methods
Integrierte Veranstaltungen und ein Projekt.
Requirements for participation and examination
Desirable prerequisites for participation in the courses:
Es werden Kenntnisse des Bachelor-Moduls „Regelungstechnik“ (kontinuierliche Standardregelkreise) oder äquivalente Vorkenntnisse vorausgesetzt.
Mandatory requirements for the module examination registration:
This module has no examination requirements.
Completion of the module
| Grading | Graded |
|---|---|
| Exam format | Portfolio examination |
| Language | German |
Test elements
| Name | Points/Weight | Category | Duration/Extent |
|---|---|---|---|
| Ergebnisprüfung: Protokollierte praktische Leistung | 20 | ||
| Punktuelle Leistungsabfrage: Schriftlicher Test | 40 | ||
| Punktuelle Leistungsabfrage oder Ergebnisprüfung: Je nachdem, welcher Wahlpflichtteil gewählt wird (siehe dazu obige Prüfungsformbeschreibung) | 40 |
Exam description
Die Portfolioprüfung dieses Modul setzt sich aus einem schriftlichen Test (40 Portfoliopunkte) sowie einer protokollierten praktischen Leistung (20 Portfoliopunkte) im Fach „Mehrgrößenregelsysteme" und den unten aufgelisteten Prüfungselementen aus der gewählten Wahlpflicht-Lehrveranstaltung zusammen.
Die Leistung der integrierten Lehrveranstaltung „Nichtlineare Regelsysteme“ wird in Form eines schriftlichen Tests mit 40 Portfoliopunkten erbracht.
Die Leistung der Veranstaltung „Hybride Systeme" wird in Form von eines mündlichen Tests mit 40 Portfoliopunkten erbracht.
Die Leistung der Veranstaltung „Ereignisdiskrete Systeme" wird in Form von zwei schriftlichen Tests (je 20 Portfoliopunkte) erbracht.
Die Leistung der integrierten Lehrveranstaltung „Systemidentifikation und Regelung in der Medizin“ wird in Form eines mündlichen Tests mit 40 Portfoliopunkten erbracht.
Die Leistung des Projektpraktikums „Automatisierung“ wird in Form einer protokollierten praktischen Leistung mit 40 Portfoliopunkten erbracht.
Die Gesamtnote gemäß § 47 (2) AllgStuPO wird nach dem Notenschlüssel 3 der Fakultät IV ermittelt.
Die Leistung der integrierten Lehrveranstaltung „Nichtlineare Regelsysteme“ wird in Form eines schriftlichen Tests mit 40 Portfoliopunkten erbracht.
Die Leistung der Veranstaltung „Hybride Systeme" wird in Form von eines mündlichen Tests mit 40 Portfoliopunkten erbracht.
Die Leistung der Veranstaltung „Ereignisdiskrete Systeme" wird in Form von zwei schriftlichen Tests (je 20 Portfoliopunkte) erbracht.
Die Leistung der integrierten Lehrveranstaltung „Systemidentifikation und Regelung in der Medizin“ wird in Form eines mündlichen Tests mit 40 Portfoliopunkten erbracht.
Die Leistung des Projektpraktikums „Automatisierung“ wird in Form einer protokollierten praktischen Leistung mit 40 Portfoliopunkten erbracht.
Die Gesamtnote gemäß § 47 (2) AllgStuPO wird nach dem Notenschlüssel 3 der Fakultät IV ermittelt.
Duration of the module
The following number of semesters is estimated for taking and completing the module: 2 semester(s).
This module can be started in the following semesters: Winter and summer semester.
Maximum number of participants
This module is not limited to a number of students.
Registration procedures
Das Modul wird über QisPos angemeldet.
Details zur Anmeldung zu den Prüfungsleistungen werden jeweils rechtzeitig im Internet (www.control.tu-berlin.de) und durch Aushang vor dem Sekr. EN 11 (Raum EN 237) bekannt gegeben.
Details zur Anmeldung zu den Prüfungsleistungen werden jeweils rechtzeitig im Internet (www.control.tu-berlin.de) und durch Aushang vor dem Sekr. EN 11 (Raum EN 237) bekannt gegeben.
Recommended reading, lecture notes
Lecture notes
unavailable
Electronic lecture notes
available – http://www.control.tu-berlin.de
Recommended literature
No recommended literature given
Assigned programs
This module is not used in any program.
Miscellaneous
Achtung: Aufgrund der Umstellung vom drei-semestrigen Master auf den vier-semestrigen Master werden die Veranstaltungen "Hybride Systeme" und "Nichtlineare Regelsysteme" im SoSe 16 und WiSe 16/17 nicht angeboten und finden erst wieder im SoSe 17 statt.
Falls bereits fundierte Kenntnisse auf dem Gebiet der Mehrgrößenregelsysteme vorliegen, kann die Pflichtlehrveranstaltung durch Veranstaltungen aus dem Wahlbereich ersetzt werden. Die Kenntnisse müssen vom Verantwortlichen für das Modul anerkannt werden.
Die Teilnehmerzahlen beim Projektpraktikum sind begrenzt.
Mehrgrößenregelsysteme:
[1] Lunze, J.: Regelungstechnik 2: Mehrgrößensysteme, Digitale Regelung, Springer, 2008.
[2] Raisch, J.: Mehrgrößenregelungen im Frequenzbereich, Oldenbourg, 1994, (online auf http://www.control.tu-berlin.de verfügbar).
[3] Kailath, T.: Linear Systems, Prentice Hall, 1980.
[4] Green, M.; Limebeer, D.: Linear Robust Control, Prentice Hall, 1994.
[5] Anderson, B.; Moore, J.: Optimal Control: Linear Quadratic Methods, Prentice Hall, 1990.
[6] Maciejowski, J.: Multivariable Feedback Design, Addison Wesley, 1989.
[7] Bryson, A.; Ho Y.: Applied Optimal Control: Optimization, Estimation and Control, Taylor & Francis Inc, 1988.
Nichtlineare Regelsysteme:
[1] Glad, T., Ljung, L.: Control Theory: Multivariable and Nonlinear Methods, Taylor & Francis, 2000.
[2] Marquez, H. J.: Nonlinear Control Systems, Analysis and Design, Wiley-Interscience, 2003.
[3] Friedland, B.: Advanced Control System Design, Prentice Hall, 1996.
[4] Khalil, H. K.: Nonlinear Systems, Prentice-Hall, 2002.
[5] Isidori, A.: Nonlinear Control Systems, Springer, 1995.
[6] Slotine, J.-J. E., Li, W.: Applied Nonlinear Control, Prentice Hall, 1991.
[7] Maciejowski, J.: Predictive Control with Constraints, Prentice Hall, 2002
[8] Unbehauen, H.: Regelungstechnik II, Vieweg, 2000.
Hybride Systeme:
[1] Goebel, R., Sanfelice, R., Teel, A.: Hybrid Dynamical Systems, IEEE Control Systems Magazine, Vol. 29, 2, pp. 28-93, 2009.
[2] Liberzon, D.: Switching in Systems and Control, Birkhäuser, 2003.
[3] Lunze, J.: Lamnabhi-Lagarrigue, F.(eds.): Handbook of Hybrid Systems Control, 2009
Ereignisdiskrete Systeme:
[1] Cassandras, C.G.; Lafortune, S.: Introduction to Discrete Event Systems, Springer, 2007.
[2] Kiencke, U.: Ereignisdiskrete Systeme: Modellierung und Steuerung verteilter Systeme, Oldenbourg, 1997.
[3] Murata, T.: Petri Nets: Properties, Analysis and Applications, Proceedings of the IEEE, Vol. 77, No. 4,1989.
[4] Lunze, J.: Ereignisdiskrete Systeme, Oldenbourg, 2006.
[5] Reisig, W.: Petri Nets: An Introduction, Springer, 1985.
[6] Wonham, W.H.: Supervisory Control of Discrete-Event Systems, © W.H. Wonham, University of Toronto
Systemidentifikation und Regelung in der Medizin:
[1] Ikonen, E., Najim, K.: Advanced Process Identification and Control, Marcel Dekker, Inc., 2002.
[2] Westerwick, D. T., Kearney, R. E.: Identification of Nonlinear Physiological Systems, Wiley Interscience, 2003.
[3] Nelles, O.: Nonlinear System Identification, Springer, 2001.
[4] Landau, I. D., Zito, G.: Digital Control Systems: Design, Identification and Implementation , Springer, 2006.
[5] Aström, K., Wittenmark, A.: Computer-Controlled Systems: Theory und Design, Prentice Hall, 1997.
[6] Ljung, L.: System Identification: Theory for the Users, Prentice Hall, 1999.
[7] Maciejowski, J.: Predictive Control with Constraints, Prentice Hall, 2002.
Falls bereits fundierte Kenntnisse auf dem Gebiet der Mehrgrößenregelsysteme vorliegen, kann die Pflichtlehrveranstaltung durch Veranstaltungen aus dem Wahlbereich ersetzt werden. Die Kenntnisse müssen vom Verantwortlichen für das Modul anerkannt werden.
Die Teilnehmerzahlen beim Projektpraktikum sind begrenzt.
Mehrgrößenregelsysteme:
[1] Lunze, J.: Regelungstechnik 2: Mehrgrößensysteme, Digitale Regelung, Springer, 2008.
[2] Raisch, J.: Mehrgrößenregelungen im Frequenzbereich, Oldenbourg, 1994, (online auf http://www.control.tu-berlin.de verfügbar).
[3] Kailath, T.: Linear Systems, Prentice Hall, 1980.
[4] Green, M.; Limebeer, D.: Linear Robust Control, Prentice Hall, 1994.
[5] Anderson, B.; Moore, J.: Optimal Control: Linear Quadratic Methods, Prentice Hall, 1990.
[6] Maciejowski, J.: Multivariable Feedback Design, Addison Wesley, 1989.
[7] Bryson, A.; Ho Y.: Applied Optimal Control: Optimization, Estimation and Control, Taylor & Francis Inc, 1988.
Nichtlineare Regelsysteme:
[1] Glad, T., Ljung, L.: Control Theory: Multivariable and Nonlinear Methods, Taylor & Francis, 2000.
[2] Marquez, H. J.: Nonlinear Control Systems, Analysis and Design, Wiley-Interscience, 2003.
[3] Friedland, B.: Advanced Control System Design, Prentice Hall, 1996.
[4] Khalil, H. K.: Nonlinear Systems, Prentice-Hall, 2002.
[5] Isidori, A.: Nonlinear Control Systems, Springer, 1995.
[6] Slotine, J.-J. E., Li, W.: Applied Nonlinear Control, Prentice Hall, 1991.
[7] Maciejowski, J.: Predictive Control with Constraints, Prentice Hall, 2002
[8] Unbehauen, H.: Regelungstechnik II, Vieweg, 2000.
Hybride Systeme:
[1] Goebel, R., Sanfelice, R., Teel, A.: Hybrid Dynamical Systems, IEEE Control Systems Magazine, Vol. 29, 2, pp. 28-93, 2009.
[2] Liberzon, D.: Switching in Systems and Control, Birkhäuser, 2003.
[3] Lunze, J.: Lamnabhi-Lagarrigue, F.(eds.): Handbook of Hybrid Systems Control, 2009
Ereignisdiskrete Systeme:
[1] Cassandras, C.G.; Lafortune, S.: Introduction to Discrete Event Systems, Springer, 2007.
[2] Kiencke, U.: Ereignisdiskrete Systeme: Modellierung und Steuerung verteilter Systeme, Oldenbourg, 1997.
[3] Murata, T.: Petri Nets: Properties, Analysis and Applications, Proceedings of the IEEE, Vol. 77, No. 4,1989.
[4] Lunze, J.: Ereignisdiskrete Systeme, Oldenbourg, 2006.
[5] Reisig, W.: Petri Nets: An Introduction, Springer, 1985.
[6] Wonham, W.H.: Supervisory Control of Discrete-Event Systems, © W.H. Wonham, University of Toronto
Systemidentifikation und Regelung in der Medizin:
[1] Ikonen, E., Najim, K.: Advanced Process Identification and Control, Marcel Dekker, Inc., 2002.
[2] Westerwick, D. T., Kearney, R. E.: Identification of Nonlinear Physiological Systems, Wiley Interscience, 2003.
[3] Nelles, O.: Nonlinear System Identification, Springer, 2001.
[4] Landau, I. D., Zito, G.: Digital Control Systems: Design, Identification and Implementation , Springer, 2006.
[5] Aström, K., Wittenmark, A.: Computer-Controlled Systems: Theory und Design, Prentice Hall, 1997.
[6] Ljung, L.: System Identification: Theory for the Users, Prentice Hall, 1999.
[7] Maciejowski, J.: Predictive Control with Constraints, Prentice Hall, 2002.