Simulation and Diagnostic TechnologyModule description #40706 / Version 8
- 6 CP
- Written exam
- Graded
- Winter and summer semester
- German
This module description is not valid in the current semester (Winter semester 2026/27).
Current version (v11)
| Module / Version | #40706 / #8 |
|---|---|
| Validity | Winter semester 2020/21 – Winter semester 2020/21 |
| Available language(s) | German |
| Credit points | 6 |
| Person responsible for the module | Gühmann, Clemens |
| Grading | Graded |
| Exam format | Written exam |
| Language(s) of instruction | German |
Affiliation
| Faculty | Fakultät IV |
|---|---|
| Institute | Institut für Energie und Automatisierungstechnik |
| Academic chair | 34311600 FG Elektronische Mess- und Diagnosetechnik |
Contact
| Office | EN 13 |
|---|---|
| Contact person | Heinze, Ewa |
| E-mail address | ewa.heinze@tu-berlin.de |
| Website | http://www.mdt.tu-berlin.de |
Learning outcomes
Students have an overview on the field of modeling and technical diagnostics and are able to independently work out solutions for the core tasks control and diagnostics of mechatronic components (in the motor vehicle) according to scientific methods.
Content
In the intergrated course (IV) Modeling and Simulation of Mechatronic Systems, we first gave an introduction to the application of the simulation and then teach the methods and tools for modeling. As an application in simulation, the areas of diagnosis, control and regulation apply. For the simulation, the basics of Simulink and Modelica are taught. The lectures are combined with project-oriented modeling tasks, which are independently solved by the students.
In the lecture Pattern Recognition and Technical Diagnosis the statistical basics of pattern recognition are taught. Subsequently, classification and pattern recognition processes (machine learning) as well as modern model-based diagnostic procedures for mechatronic systems are discussed.
In the lecture Pattern Recognition and Technical Diagnosis the statistical basics of pattern recognition are taught. Subsequently, classification and pattern recognition processes (machine learning) as well as modern model-based diagnostic procedures for mechatronic systems are discussed.
Module components
Compulsory area
The following courses are mandatory for this module:
| Courses | Type | Number | Frequency | Language | Hours per week | Course catalog |
|---|---|---|---|---|---|---|
| Modellbildung und Simulation mechatronischer Systeme | Integrated course | 0430 L 318 | Winter semester | [de] | 2 | WS 2026/27 (1) ISIS |
| Mustererkennung und Technische Diagnose | Lecture | 0430 L 343 | Summer semester | – | 2 | ISIS |
Courses in the course catalog
Courses created from the teaching units of this module.
Winter semester 2026/27 (1)
Modellbildung und Simulation mechatronischer Systeme (Integrated course) 1
- Modellbildung und Simulation mechatronischer Systeme (Integrierte Veranstaltung) Mi. 14.10 - 16.12.26, wöchentlich, Mi. 06.01 - 10.02.27, wöchentlich, 12:00 - 14:00 Charlottenburg, MA 143 (Tafel defekt) 0430 L 318
Workload and credit points
Modellbildung und Simulation mechatronischer Systeme (Integrated course)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Attendance | 15 | 2 h | 30 h |
| Pre/post processing | 15 | 4 h | 60 h |
| 90 h | |||
Mustererkennung und Technische Diagnose (Lecture)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Präsenzzeit | 15 | 2 h | 30 h |
| Selbständiges Lernen und Lesen | 1 | 60 h | 60 h |
| 90 h | |||
The workload of the module adds up to 180 hours. The module therefore comprises 6 credit points.
Description of teaching and learning methods
Pattern Recognition and Technical Diagnosis - Lectures (VL): Frontal Lectures
Modeling and Simulation of Mechatronic Systems - Integrated Event (IV) - Frontal presentations and project-oriented task processing
Modeling and Simulation of Mechatronic Systems - Integrated Event (IV) - Frontal presentations and project-oriented task processing
Requirements for participation and examination
Desirable prerequisites for participation in the courses:
Basics of measurement data processing, control engineering, basic electronics knowledge, knowledge in the programming language Python.
Mandatory requirements for the module examination registration:
The examination requirements could not be retrieved.
Completion of the module
| Grading | Graded |
|---|---|
| Exam format | Written exam |
| Language | German |
| Duration/Extent | 150 min |
Exam description
Insgesamt können 100 Portfoliopunkte erreicht werden:
* Vorlesungen je 50 Portfoliopunkte
* Seminar 50 Portfoliopunkte
Im Rahmen des Seminars sind verschiedene Studienleistungen zu erbringen. Ihre
Art und Gewichtung in Portfoliopunkten sind in der unten stehenden Tabelle aufgeführt.
Die Gesamtnote gemäß §47 (2) AllgStuPO wird nach dem Notenschlüssel 2 der Fakultät IV ermittelt.
* Vorlesungen je 50 Portfoliopunkte
* Seminar 50 Portfoliopunkte
Im Rahmen des Seminars sind verschiedene Studienleistungen zu erbringen. Ihre
Art und Gewichtung in Portfoliopunkten sind in der unten stehenden Tabelle aufgeführt.
Die Gesamtnote gemäß §47 (2) AllgStuPO wird nach dem Notenschlüssel 2 der Fakultät IV ermittelt.
Duration of the module
The following number of semesters is estimated for taking and completing the module: 2 semester(s).
This module can be started in the following semesters: Winter and summer semester.
Maximum number of participants
This module is not limited to a number of students.
Registration procedures
keine
Recommended reading, lecture notes
Lecture notes
unavailable
Electronic lecture notes
unavailable
Recommended literature
- Cellier, F., E.: Continous System Simulation. Springer (2006)
- Duda, R. O.; Hart, P. E.: Pattern Classification. Wiley (2000)
- Fritzson, P.: Principles of Object-Oriented Modeling and Simulation with Modelica 3.3: A Cyber-Physical Approach (2015)
- Gipser, M.: Systemdynamik und Simulation. B. G. Teubner Stuttgart – Leipzig (1999)
- Isermann, R.; Münchhoff, M.: Identification of Dynamic Systems: An Introduction with Applications. Springer (2011)
- Isermann, R.: Fault-Diagnosis Systems. An Introduction from Fault Detection to Fault Tolerance. Springer Verlag (2006)
- Janczak, A.: Identification of Nonlinear Systems Using Neural Networks and Polynomial Models. Springer Berlin (2005)
- Ljung, L.: System Identification: Theory for the User (1999)
- Müller, R.: Modellierrung, Analyse und Simulation elektrischer und mechanischer Systeme mit Maple und MapleSim. Springer Vieweg (2014)
- Niemann, H.:Klassifikation von Mustern. Springer-Verlag, Berlin. (1983)
- Schölkopf, B.; Smola, Alexander J : Learning with kernels: Support vector machines, regularization, optimization, and beyond. MIT press (2002)
- Tiller, M: Introduction to Physical Modelling with Modelica. Kluwer Academic Publishers (2001)
- Tiller, M: Modelica by Examples. Internetbuch. http://book.xogeny.com/
- Zirn, O.: Modellbildung und Simulation mechatronischer Systeme. Expert Verlag (2002)
Assigned programs
This module is not used in any program.
Miscellaneous
Attention! The module can not be combined with the modules "Technical Diagnosis I" or "Simulation I".