Skip to content
Technische Universität Berlin Deutsch
Course catalog and module transfer system

Simulation and technical diagnostics (applications)Module description #40768 / Version 4

← Module page Deutsche Fassung
Module / Version#40768 / #4
ValiditySince Winter semester 2024/25
Available language(s)German
Credit points6
Person responsible for the moduleGühmann, Clemens
GradingGraded
Exam formatPortfolio examination
Language(s) of instructionGerman

Affiliation

FacultyFakultät IV
InstituteInstitut für Energie und Automatisierungstechnik
Academic chair34311600 FG Elektronische Mess- und Diagnosetechnik

Contact

OfficeEN 13
Contact personBeyer, Christine
E-mail addressclemens.guehmann@tu-berlin.de
Websitehttp://www.tu-berlin.de

Learning outcomes

After having completed the module, students are able to solve practical problems in the fields of pattern recognition and modeling / simulation. If the project is chosen as a compulsory elective, the students will also be able to develop, simulate and apply complex models of mechatronic systems using the object-oriented modeling language Modelica or, under Simulink. After attending the seminar, the students are able to conduct a literature research on a specific research topic, summarize the results scientifically and then present and defend in a lecture.

Content

The lab "Pattern Recognition and Technical Diagnostics" (Praktikum Mustererkennung und Technische Diagnose) deepens the contents of the lecture "Pattern Recognition and Technical Diagnostics" (module Simulation and Technical Diagnostics), where practical problems are solved: classification of electric motors.

In the seminar results of new research on the field of measurement and diagnostic thechnology, modeling and simulation are recited in presentations and papers. The main focus lies on vehicle and engine development.

The integrated course "Regulation and Control in Automotive Mechatronics" focuses on the model-based design of control systems and the regulation of mechatronic systems. The course has a lecture part in which the theory of design is taught. In the subsequent practical phase, a model-based controller is designed using a specific, real system (e.g. throttle valve actuator), implemented on a microcontroller and then tested.

Module components

Compulsory area

The following courses are mandatory for this module:

CoursesTypeNumberFrequencyLanguageHours per weekCourse catalog
Mustererkennung und Technische DiagnoseInternship0430 L 341 Summer semester–2 ISIS

Compulsory elective area

A selection of the following courses must be completed:

CoursesTypeNumberFrequencyLanguageHours per weekCourse catalog
Kleines Projekt Simulation und Technische DiagnoseProject0430 L 331 Winter and summer semester[de]2 ISIS
Regelung und Steuerung in der KraftfahrzeugmechatronikIntegrated course Winter semester[de]2 ISIS

Courses in the course catalog

Courses created from the teaching units of this module.

Winter semester 2026/27 (2)

Kleines Projekt Simulation und Technische Diagnose (Project) 2

All groups of this course in the catalog

Workload and credit points

Mustererkennung und Technische Diagnose (Internship)

Workload descriptionMultiplierHoursTotal
Präsenzzeit82 h16 h
Protokolle158 h58 h
Vor- und Nachbearbeitung82 h16 h
90 h

Kleines Projekt Simulation und Technische Diagnose (Project)

Workload descriptionMultiplierHoursTotal
Präsenzzeit152 h30 h
Vor-/Nachbereitung154 h60 h
90 h

Regelung und Steuerung in der Kraftfahrzeugmechatronik (Integrated course)

Workload descriptionMultiplierHoursTotal
Bearbeitung der Praktikumsaufgaben418 h72 h
Attendance92 h18 h
90 h

The workload of the module adds up to 270 hours. The module therefore comprises 6 credit points.

Description of teaching and learning methods

- Lab (PR / Praktikum): autonomous processing of tasks

Requirements for participation and examination

Desirable prerequisites for participation in the courses:

Desirable conditions for participation in the courses:
Basics of measurement data processing, control engineering, basic electronics knowledge, knowledge in the programming language Python.

Participation in the lab "Pattern Recognition and Technical Diagnostics" (Praktikum Mustererkennung und Technische Diagnose) is only possible if the lecture "Pattern Recognition and Technical Diagnosis" is taken. The lecture takes place in the same semester as the lab.

Mandatory requirements for the module examination registration:

The examination requirements could not be retrieved.

Completion of the module

GradingGraded
Exam formatPortfolio examination
Type of portfolio examination100 points in total
LanguageGerman

Test elements

NamePoints/WeightCategoryDuration/Extent
(Ergebnisprüfung) PJ Kleines Projekt Simulation und Technische Diagnose - Abschlusspräsentation10oral20 min Vortrag - 10 min Fragen
(Ergebnisprüfung) PJ Kleines Projekt Simulation und Technische Diagnose - Ausarbeitung/Dokumentation40writtenmax. 15 Seiten Inhalt pro Person
(Ergebnisprüfung) PJ Kleines Projekt Simulation und Technische Diagnose - Entwickelte Hardware/Software40practical65 Stunden
(Ergebnisprüfung) SEM Seminar Mess- und Diagnosetechnik - Schriftliche Ausarbeitung80written6-8 Seiten im ieee Format
(Ergebnisprüfung) SEM Seminar Mess- und Diagnosetechnik - Vortrag20oral20 min Vortrag - 10 min Fragen
(Lernprozessevaluation) PJ Kleines Projekt Simulation und Technische Diagnose - Projektplanung10writtenbegleitend
[Ergebnisprüfung] IV Bewertung der Praktikumsdokumentation100writtenbegleitend

Exam description

The passing of the lab is a prerequisite for the completion of the module. It is not graded. The module grade results from the points of the project or the seminar.

Duration of the module

The following number of semesters is estimated for taking and completing the module: 2 semester(s).

This module can be started in the following semesters: Winter and summer semester.

Maximum number of participants

The maximum capacity of participants is 32.

Registration procedures

Registration for the lab takes place via the corresponding ISIS course.

The offered projects will be presented in the first lecture week (see course catalog).

Registration for the seminar is made via the MDT website at https://www.mdt.tu-berlin.de/menue/lehre/seminar_mess_und_diagnosetechnik/
The seminar is limited to 10 participants.

Recommended reading, lecture notes

Lecture notes

unavailable

Electronic lecture notes

unavailable

Recommended literature

No recommended literature given

Assigned programs

This module version is used in the following programs:

Program / program versionSemester(s)Curriculum component
Computer Engineering
Computer Engineering (M. Sc.) - StuPO 2015
SS 2025Wahlpflicht Studiengebiete Fak. IV › Automatisierungstechnik / Automation and Control
WS 2025/26Wahlpflicht Studiengebiet A › Automatisierungstechnik / Automation and Control
SS 2026Wahlpflicht Studiengebiete Fak. IV › Automatisierungstechnik / Automation and Control
WS 2026/27Wahlpflichtbereich › Studiengebiet A › Automatisierungstechnik / Automation and Control
Electrical Engineering
Electrical Engineering (M. Sc.) - StuPO 2015
SS 2025Wahlpflicht Studiengebiete Fak. IV › Automatisierungstechnik / Automation and Control
WS 2025/26Wahlpflicht Studiengebiete Fak. IV › Automatisierungstechnik / Automation and Control
SS 2026Wahlpflicht Studiengebiete Fak. IV › Automatisierungstechnik / Automation and Control
WS 2026/27Wahlpflichtbereich › Studiengebiete Fak. IV › Automatisierungstechnik / Automation and Control

Miscellaneous

Not specified