Skip to content
Technische Universität Berlin Deutsch
Course catalog and module transfer system

Light & Road SafetyModule description #41070 / Version 3

← Module page Deutsche Fassung
Module / Version#41070 / #3
ValiditySince Summer semester 2026
Available language(s)English, German
Credit points6
Person responsible for the moduleVölker, Stephan
GradingGraded
Exam formatOral exam
Language(s) of instructionGerman

Affiliation

FacultyFakultät IV
InstituteInstitut für Energie und Automatisierungstechnik
Academic chair34311500 FG Lichttechnik

Contact

OfficeE 6
Contact personKnoop, Martine
E-mail addresslehre@li.tu-berlin.de
Websitehttps://www.tu.berlin/li

Learning outcomes

After completing the module, students will be able to understand the correlation between the lighting situation and road safety. They know the most important lighting parameters influencing road safety and are able to carry out lighting calculations.
With their knowledge, the students qualify for work in the lamp and luminaire and automotive industry, in lighting design offices, in cities and municipalities, in light and radiation measurement laboratories, in test centres and for expert activities

Content

The Road Safety and Lighting module offers the courses Lighting Engineering II (obligatory), Fundamentals of Lighting Technology / Introduction to Lighting Technology, Physiological Optics and Light and Radiation Measurement Technology. A selection of topics within these courses:

The WHO has proposed Vision Zero for traffic, which means that no one should die in traffic accidents. The visual perception of hazards is a fundamental part of this vision. In the course "Lighting Technology II", the students will learn about key parameters of night-time perception and be able to derive the corresponding quality criteria for recognisability, uniformity, glare and efficiency. In addition, aspects of traffic safety, architectural concepts, sustainability and the ecological impact of artificial lighting, such as the impairment of ecological diversity through light pollution, will be considered. The focus is on the design and evaluation of outdoor lighting. In the practical part of the course, students will carry out measurements in outdoor spaces and create simulations using appropriate software.

In the lecture series ‘Basics of Light and Lighting’ (BSc) and ‘Fundamentals of Lighting Technology’ (MSc), participants will learn about and apply both the basic variables of lighting technology and more complex lighting calculations. This part is supplemented by an introduction to the basic principles of lighting technology. Lighting technology concepts are illustrated and explored in depth using theoretical and practical examples.

The course ‘Physiological Optics’ covers the anatomy of the eye, the visual process and central functions of the visual system. The theoretical part focuses on visual performance, adaptation, accommodation, glare and colour perception. In addition, non-visual effects of light are discussed, such as on circadian rhythms and well-being. In the practical part, students learn methods for measuring visual acuity, glare and other parameters.

Scientific disciplines (vision science, psychology, biology, medicine, computer graphics, etc.) deal with light, but very few are able to describe their experimental conditions photometrically correctly. In the 'Light and radiation measurement technology' course, the students will learn not only the physical fundamentals, but above all the complex consideration and mapping of the visual system to measurement technology. Topics covered include measurement uncertainty, reference sources and receivers, thermal and photoelectric receivers, as well as parameters and systems of measurement technology. In addition, spectral light measurement and imaging light measurement techniques are presented. Fields of application include outdoor lighting, daylight and the calibration of cameras and displays. In the practical part of the course, students deal with measurement inaccuracy and gain insights into current research and application fields through excursions.

Module components

Compulsory area

The following courses are mandatory for this module:

CoursesTypeNumberFrequencyLanguageHours per weekCourse catalog
Beleuchtungstechnik II: Intelligente Lichtlösungen für urbane Mobilität und Smart CitiesIntegrated course0430 L 312 Winter semester[de]2 ISIS

Compulsory elective area

A selection of the following courses must be completed:

CoursesTypeNumberFrequencyLanguageHours per weekCourse catalog
Einführung in die LichttechnikIntegrated course0430 L 601 Winter semester–2 ISIS
Grundlagen der LichttechnikIntegrated course0430 L 614 Summer semester–2 ISIS
Licht- und Strahlungsmesstechnik: Grundlagen und AnwendungenLecture0430 L 626 Summer semester[de]2 ISIS
Physiologische Optik: Grundlagen der visuellen Wahrnehmung und LichtwirkungenLecture0430 L 616 Summer semester[de]2 ISIS

Courses in the course catalog

Courses created from the teaching units of this module.

Winter semester 2026/27 (2)

Beleuchtungstechnik II: Intelligente Lichtlösungen für urbane Mobilität und Smart Cities (Integrated course) 1

All groups of this course in the catalog

Einführung in die Lichttechnik (Integrated course) 1

All groups of this course in the catalog

Workload and credit points

Beleuchtungstechnik II: Intelligente Lichtlösungen für urbane Mobilität und Smart Cities (Integrated course)

Workload descriptionMultiplierHoursTotal
Attendance152 h30 h
Pre/post processing154 h60 h
90 h

Einführung in die Lichttechnik (Integrated course)

Workload descriptionMultiplierHoursTotal
Attendance152 h30 h
Pre/post processing154 h60 h
90 h

Grundlagen der Lichttechnik (Integrated course)

Workload descriptionMultiplierHoursTotal
Attendance152 h30 h
Pre/post processing154 h60 h
90 h

Licht- und Strahlungsmesstechnik: Grundlagen und Anwendungen (Lecture)

Workload descriptionMultiplierHoursTotal
Attendance152 h30 h
Pre/post processing154 h60 h
90 h

Physiologische Optik: Grundlagen der visuellen Wahrnehmung und Lichtwirkungen (Lecture)

Workload descriptionMultiplierHoursTotal
Attendance152 h30 h
Pre/post processing154 h60 h
90 h

The workload of the module adds up to 450 hours. The module therefore comprises 6 credit points.

Description of teaching and learning methods

The course content is taught in integrated courses. The integrated courses alternate between theoretical sections and practical exercises, in which the theoretical content is reinforced using practical examples.

Requirements for participation and examination

Desirable prerequisites for participation in the courses:

If the course ‘Basics of Light and Lighting’ was not attended and examined in the Bachelor's programme or the course ‘Fundamentals of Lighting Technology’ was not attended and examined in the Master's programme, prior attendance of the course ‘Fundamentals of Lighting Technology’ is desirable

Mandatory requirements for the module examination registration:

This module has no examination requirements.

Completion of the module

GradingGraded
Exam formatOral exam
LanguageGerman
Duration/Extentapprox. 40 minutes

Duration of the module

The following number of semesters is estimated for taking and completing the module: 1 semester(s).

This module can be started in the following semesters: Winter and summer semester.

Maximum number of participants

This module is not limited to a number of students.

Registration procedures

Registration for the module examination is done via MOSES.

Recommended reading, lecture notes

Lecture notes

unavailable

Electronic lecture notes

available – The lecture material is provided via the ISIS course.

Recommended literature

No recommended literature given

Assigned programs

This module version is used in the following programs:

Program / program versionSemester(s)Curriculum component
Automotive Systems
Automotive Systems (M. Sc.) - StuPO 2017
SS 2026Wahlpflichtbereich
WS 2026/27Wahlpflichtbereich

Miscellaneous

Double recognition of individual courses from modules already taken is not permitted.