Photonic Integrated Circuits - Design and ApplicationsModule description #41083 / Version 2
- 6 CP
- Portfolio examination
- Graded
- Summer semester
- English
| Module / Version | #41083 / #2 |
|---|---|
| Validity | Since Summer semester 2024 |
| Available language(s) | English, German |
| Credit points | 6 |
| Person responsible for the module | Zimmermann, Lars |
| Grading | Graded |
| Exam format | Portfolio examination |
| Language(s) of instruction | English |
Affiliation
| Faculty | Fakultät IV |
|---|---|
| Institute | Institut für Hochfrequenz und Halbleiter-Systemtechnologien |
| Academic chair | 34321700 FG Silizium-Photonik |
Contact
| Office | HFT 4 |
|---|---|
| Contact person | Zimmermann, Lars |
| E-mail address | l.zimmermann@tu-berlin.de |
| Website | Not specified |
Learning outcomes
Photonic Integrated Circuits - Design and Applications (Lecture):
The students acquire a basic understanding of the theoretical and practical fundamentals of photonic integrated circuits. The students are able to interpret, compare and evaluate scientific publications in the area of the photonic and optoelectronic integration.
Numerical Design for Photonic Integrated Circuits (Tutorial):
The students acquire basic practical knowledge about the development of photonic integrated circuits (PIC). The students will be able to implement basic elements of integrated optics in commercial software, carry out numerical simulations, interpret the results and make them usable for practical designs.
The students acquire a basic understanding of the theoretical and practical fundamentals of photonic integrated circuits. The students are able to interpret, compare and evaluate scientific publications in the area of the photonic and optoelectronic integration.
Numerical Design for Photonic Integrated Circuits (Tutorial):
The students acquire basic practical knowledge about the development of photonic integrated circuits (PIC). The students will be able to implement basic elements of integrated optics in commercial software, carry out numerical simulations, interpret the results and make them usable for practical designs.
Content
The theoretical fundamentals are tought in a series of lectures with the following topics:
- Introduction to silicon photonics
- Silicon photonics - technology overview
- Wave propagation in silicon photonic waveguides
- Mode expansion and orthogonality
- Coupled-mode theory
- Selected passive devices
- Modulators and photodetectors I
- Modulators and photodetectors II
- Optical amplifiers and lasers
- Test and packaging
- Optical communications
- Optical metrology
- Biophotonics and neurophotonics
- Integrated quantum optics and optical computing
An introduction to the numerical design package (FimmWave) is given in computer tutorials. Afterwards, the students work on a design task independently using the previously introduced software. The design geometry and the parameter space required for optimization are defined. The numerical analysis in individual parameters is carried out and evaluated. The findings are summarized in a basic model. The basic model is then finely optimized numerically. The design procedure is embedded in a virtual project. The goal of the project is to present design optimization in an article based on a scientific conference paper.
-Tutorial 1: Introduction to the numerical software 1.
-Tutorial 2: Introduction to the numerical software 2.
-Tutorial 3: Definition of the optimization task and introduction to the objectives of the virtual design project (structure of a typical conference paper).
Independent numerical optimization of the component.
-Tutorial 4/5: Presentation of the simulation results.
Independent writing of a 3-page conference paper presenting the optimization results.
-Tutorial 6: Discussion of the evaluation of the articles.
- Introduction to silicon photonics
- Silicon photonics - technology overview
- Wave propagation in silicon photonic waveguides
- Mode expansion and orthogonality
- Coupled-mode theory
- Selected passive devices
- Modulators and photodetectors I
- Modulators and photodetectors II
- Optical amplifiers and lasers
- Test and packaging
- Optical communications
- Optical metrology
- Biophotonics and neurophotonics
- Integrated quantum optics and optical computing
An introduction to the numerical design package (FimmWave) is given in computer tutorials. Afterwards, the students work on a design task independently using the previously introduced software. The design geometry and the parameter space required for optimization are defined. The numerical analysis in individual parameters is carried out and evaluated. The findings are summarized in a basic model. The basic model is then finely optimized numerically. The design procedure is embedded in a virtual project. The goal of the project is to present design optimization in an article based on a scientific conference paper.
-Tutorial 1: Introduction to the numerical software 1.
-Tutorial 2: Introduction to the numerical software 2.
-Tutorial 3: Definition of the optimization task and introduction to the objectives of the virtual design project (structure of a typical conference paper).
Independent numerical optimization of the component.
-Tutorial 4/5: Presentation of the simulation results.
Independent writing of a 3-page conference paper presenting the optimization results.
-Tutorial 6: Discussion of the evaluation of the articles.
Module components
Compulsory area
The following courses are mandatory for this module:
Workload and credit points
Photonic Integrated Circuits - Design and Applications (Exercise)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Attendance | 15 | 2 h | 30 h |
| Pre/post processing | 15 | 4 h | 60 h |
| 90 h | |||
Photonic Integrated Circuits - Design and Applications (Lecture)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Attendance | 15 | 2 h | 30 h |
| Pre/post processing | 15 | 4 h | 60 h |
| 90 h | |||
The workload of the module adds up to 180 hours. The module therefore comprises 6 credit points.
Description of teaching and learning methods
Theoretical fundamentals will be covered within a series of lectures.
The practical basics are taught in a series of computer tutorials.
The practical basics are taught in a series of computer tutorials.
Requirements for participation and examination
Desirable prerequisites for participation in the courses:
Familiarity with the module Applied Field Theory (Angewandte Feldtheorie) is desirable.
Mandatory requirements for the module examination registration:
This module has no examination requirements.
Completion of the module
| Grading | Graded |
|---|---|
| Exam format | Portfolio examination |
| Type of portfolio examination | 100 points in total |
| Language | English, German |
Test elements
| Name | Points/Weight | Category | Duration/Extent |
|---|---|---|---|
| (Examination) Oral exam | 50 | oral | 20 minutes |
| (Deliverable assessment) Written work | 50 | written | 3 pages in a conference paper format |
Exam description
The lecture is assessed by a twenty-minute oral examination.
The tutorial is assessed by the preparation of a written paper.
The tutorial is assessed by the preparation of a written paper.
Duration of the module
The following number of semesters is estimated for taking and completing the module: 1 semester(s).
This module can be started in the following semesters: Summer semester.
Maximum number of participants
The maximum capacity of participants is 10.
Registration procedures
Via ISIS.
Recommended reading, lecture notes
Lecture notes
unavailable
Electronic lecture notes
unavailable
Recommended literature
No recommended literature given
Assigned programs
This module version is used in the following programs:
| Program / program version | Semester(s) | Curriculum component |
|---|---|---|
| Computer Engineering Computer Engineering (M. Sc.) - StuPO 2015 | SS 2025 | Wahlpflicht Studiengebiete Fak. IV › Elektronik, Photonik und Integrierte Systeme / Electronics, Photonics and Integrated Systems |
| WS 2025/26 | Wahlpflicht Studiengebiet A › Elektronik, Photonik und Integrierte Systeme / Electronics, Photonics and Integrated Systems | |
| SS 2026 | Wahlpflicht Studiengebiet A › Elektronik, Photonik und Integrierte Systeme / Electronics, Photonics and Integrated Systems | |
| WS 2026/27 | Wahlpflichtbereich › Studiengebiet A › Elektronik, Photonik und Integrierte Systeme / Electronics, Photonics and Integrated Systems | |
| Electrical Engineering Electrical Engineering (M. Sc.) - StuPO 2015 | SS 2025 | Wahlpflicht Studiengebiet Elektronik, Photonik und Integrierte Systeme / Electronics, Photonics and Integrated Systems › Wahlpflicht Elektronik, Photonik und Integrierte Systeme / Electronics, Photonics and Integrated Systems |
| WS 2025/26 | Wahlpflicht Studiengebiete Fak. IV › Elektronik, Photonik und Integrierte Systeme / Electronics, Photonics and Integrated Systems | |
| SS 2026 | Wahlpflicht Studiengebiete Fak. IV › Elektronik, Photonik und Integrierte Systeme / Electronics, Photonics and Integrated Systems | |
| WS 2026/27 | Wahlpflichtbereich › Studiengebiete Fak. IV › Elektronik, Photonik und Integrierte Systeme / Electronics, Photonics and Integrated Systems | |
| Media Technology Media Technology (M. Sc.) - StuPO 2022 | SS 2025 | Wahlpflichtbereich Profilbereiche › Profilbereich Elektronik, Photonik und Integrierte Systeme |
| WS 2025/26 | Wahlpflicht weitere Profibereiche › weiterer Profilbereich Elektronik, Photonik und Integrierte Systeme | |
| SS 2026 | Wahlpflicht weitere Profibereiche › weiterer Profilbereich Elektronik, Photonik und Integrierte Systeme | |
| WS 2026/27 | Wahlpflichtbereich › Profilbereich › Elektronik, Photonik und Integrierte Systeme |
Miscellaneous
Zuordnung:
Computer Engineering (M. Sc.)
Elektrotechnik (M. Sc.)
Medieninformatik (M. Sc.)
Computer Engineering (M. Sc.)
Elektrotechnik (M. Sc.)
Medieninformatik (M. Sc.)