System-on-Chip (SoC) + RISC-V LabModule description #41097 / Version 2
- 12 CP
- Portfolio examination
- Graded
- Summer semester
- German
| Module / Version | #41097 / #2 |
|---|---|
| Validity | Since Summer semester 2025 |
| Available language(s) | German |
| Credit points | 12 |
| Person responsible for the module | Gerfers, Friedel |
| Grading | Graded |
| Exam format | Portfolio examination |
| Language(s) of instruction | German |
Affiliation
| Faculty | Fakultät IV |
|---|---|
| Institute | Institut für Technische Informatik und Mikroelektronik |
| Academic chair | 34341200 FG Mixed Signal Circuit Design |
Contact
| Office | EN 4 |
|---|---|
| Contact person | Kaiser, Tobias Christian |
| E-mail address | kaiser@tu-berlin.de |
| Website | https://www.tu.berlin/msc |
Learning outcomes
After successful completion of this module, students have gained advanced knowledge about the design of highly complex digital circuits and systems, especially Systems-on-Chip (SoC). Fields of knowledge include: fundamentals of complex SoC design, design flow, IP reuse, hardware-software co-design, SoC architectures, real-time operating systems, processor architectures, memory types and hierarchy, on-chip and off-chip bus systems, test and debug methods.
Furthermore, the students learn following practical skills in the project:
- Use of software tools to design complex digital hardware
- Navigating complex design flows for FPGA and IC development
- Extension of existing digital hardware projects, e. g. by peripheral modules, bus components, interrupt sources, bus masters
- Assessment and evaluation of feasibility and implementation overhead of digital system project ideas
- Successive implementation of digital system project ideas: specification, implementation, verification, demonstration using FPGA prototype
Furthermore, the students learn following practical skills in the project:
- Use of software tools to design complex digital hardware
- Navigating complex design flows for FPGA and IC development
- Extension of existing digital hardware projects, e. g. by peripheral modules, bus components, interrupt sources, bus masters
- Assessment and evaluation of feasibility and implementation overhead of digital system project ideas
- Successive implementation of digital system project ideas: specification, implementation, verification, demonstration using FPGA prototype
Content
This module covers advanced concepts and methods of digital hardware design and programming of Systems-on-Chip (SoC) and embedded systems. Contents of the lecture are especially: fundamentals of complex SoC design, design flow, IP reuse, hardware-software co-design, SoC architectures, real-time operating systems, processor architectures, memory types and hierarchy, on-chip and off-chip bus systems, test and debug methods.
In the project, groups of 3 - 4 students learn how to practically apply the lecture contents. The students learn to use complex digital design tools with a comprehensive design flow and hardware-software co-design. A FPGA prototype platform is employed. During the introductory phase, a series of exercise sheets is completed. Afterwards, a self-defined project idea is implemented using the example system as a basis.
In the project, groups of 3 - 4 students learn how to practically apply the lecture contents. The students learn to use complex digital design tools with a comprehensive design flow and hardware-software co-design. A FPGA prototype platform is employed. During the introductory phase, a series of exercise sheets is completed. Afterwards, a self-defined project idea is implemented using the example system as a basis.
Module components
Compulsory area
The following courses are mandatory for this module:
Workload and credit points
System-on-Chip - Entwurf und Programmierung (Lecture)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Attendance | 15 | 2 h | 30 h |
| Pre/post processing | 15 | 4 h | 60 h |
| 90 h | |||
System-on-Chip (Project)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Attendance | 15 | 2 h | 30 h |
| Project work | 15 | 12 h | 180 h |
| Pre/post processing | 15 | 4 h | 60 h |
| 270 h | |||
The workload of the module adds up to 360 hours. The module therefore comprises 12 credit points.
Description of teaching and learning methods
This module consists of a lecture part and a project part.
Requirements for participation and examination
Desirable prerequisites for participation in the courses:
We expect that participants have already completed fundamental coursework in digital circuit design, computer / microprocessor architecture and software development.
The hardware description language SystemVerilog is used throughout this course. This course does not focus on teaching basic SystemVerilog language skills. Prior experience with SystemVerilog, Verilog or VHDL are therefore valuable. If you have no experience with hardware description languages, please expect that an increased learning effort will be required of you.
Prior experience with the programming languages C and Python are also highly recommended.
The hardware description language SystemVerilog is used throughout this course. This course does not focus on teaching basic SystemVerilog language skills. Prior experience with SystemVerilog, Verilog or VHDL are therefore valuable. If you have no experience with hardware description languages, please expect that an increased learning effort will be required of you.
Prior experience with the programming languages C and Python are also highly recommended.
Mandatory requirements for the module examination registration:
This module has no examination requirements.
Completion of the module
| Grading | Graded |
|---|---|
| Exam format | Portfolio examination |
| Type of portfolio examination | 100 points in total |
| Language | English, German |
Test elements
| Name | Points/Weight | Category | Duration/Extent |
|---|---|---|---|
| (Deliverable assessment) Project: Final Presentation | 15 | oral | ~15 min pro Gruppe |
| (Deliverable assessment) Project: Implementation | 50 | flexibel | Projektimplementierung und Demo auf FPGA |
| (Deliverable assessment) Project: Interim Presentation | 10 | oral | ~15 min pro Gruppe |
| (Examination) Multiple-choice test of lecture material | 25 | written | 45 min |
Exam description
Students develop a project topic with guidance of the instructor. The topic is then implemented. The project implementation is graded based on the following aspects: ability to run and functionality of implementation on FPGA, understandability and readability of source code, complexity of chosen project, appropriate use of conveyed methods and knowledge in hardware and software development.
The sum of points of all exam components determines the final grade.
The sum of points of all exam components determines the final grade.
Duration of the module
The following number of semesters is estimated for taking and completing the module: 1 semester(s).
This module can be started in the following semesters: Summer semester.
Maximum number of participants
The maximum capacity of participants is 30.
Registration procedures
Enrolment in the ISIS course and project attendance are required. Registration formalities due to capacity limit are announced on ISIS and at the first project session.
Recommended reading, lecture notes
Lecture notes
unavailable
Electronic lecture notes
available – via ISIS
Recommended literature
- "The Design Warrior's Guide to FPGAs: Devices, Tools and Flows",558 Seiten, Newnes, 2004, ISBN-13: 978-0750676045
- A. Chandrakasan, W. J. Bowhill, F. Fox; Design of High Performance Microprocessor Circuits¨, IEEE Press, 2001
- Frank Vahid, Tony Givargis; "Embedded System Design: A Unified Hardware/Software Introduction", John Wiley & Sons
- Steve Furber; "ARM System-on-Chip Architecture (2nd Edition)", Addison-Wesley Professional
- Walter Lange, Martin Bogdan, Thomas Schweizer, "Eingebettete Systeme: Entwurf, Modellierung und Synthese", 412 Seiten, De Gruyter Oldenbourg 2015, ISBN-13: 978-3110290189
- Y. Taur, T. H. Ning; "Fundamentals of Modern VLSI Devices¨, Cambridge University Press, 1998
Assigned programs
This module version is used in the following programs:
| Program / program version | Semester(s) | Curriculum component |
|---|---|---|
| Computer Engineering Computer Engineering (B. Sc.) - StuPO 2015 | SS 2025 | Wahlpflichtbereich › Eingebettete Systeme |
| WS 2025/26 | Wahlpflichtbereich › Eingebettete Systeme | |
| SS 2026 | Wahlpflichtbereich › Eingebettete Systeme | |
| WS 2026/27 | Wahlpflichtbereich › Kataloge › Eingebettete Systeme | |
| Computer Engineering Computer Engineering (M. Sc.) - StuPO 2015 | SS 2025 | Wahlpflicht Studiengebiete Fak. IV › Eingebettete Systeme und Rechnerarchitekturen / Embedded Systems and Computer Architectures |
| WS 2025/26 | Wahlpflicht Studiengebiet B › Eingebettete Systeme und Rechnerarchitekturen / Embedded Systems and Computer Architectures | |
| SS 2026 | Wahlpflicht Studiengebiet B › Eingebettete Systeme und Rechnerarchitekturen / Embedded Systems and Computer Architectures | |
| WS 2026/27 | Wahlpflichtbereich › Studiengebiet A › Kommunikationssysteme / Communication Systems | |
| Computer Science (Informatik) Computer Science (Informatik) (M. Sc.) - StuPO 2015 | SS 2025 | Wahlpflicht Studiengebiete Fak. IV › Eingebettete Systeme und Rechnerarchitekturen / Embedded Systems and Computer Architectures |
| WS 2025/26 | Wahlpflicht Studiengebiete Fak. IV › Eingebettete Systeme und Rechnerarchitekturen / Embedded Systems and Computer Architectures | |
| SS 2026 | Studiengebiete › Eingebettete Systeme und Rechnerarchitekturen / Embedded Systems and Computer Architectures | |
| WS 2026/27 | Wahlpflichtbereich › Studiengebiet › Eingebettete Systeme und Rechnerarchitekturen / Embedded Systems and Computer Architectures | |
| Electrical Engineering Electrical Engineering (M. Sc.) - StuPO 2015 | SS 2025 | Wahlpflicht Studiengebiet Elektronik, Photonik und Integrierte Systeme / Electronics, Photonics and Integrated Systems › Wahlpflicht Elektronik, Photonik und Integrierte Systeme / Electronics, Photonics and Integrated Systems |
| WS 2025/26 | Wahlpflicht Studiengebiete Fak. IV › Elektronik, Photonik und Integrierte Systeme / Electronics, Photonics and Integrated Systems | |
| SS 2026 | Wahlpflicht Studiengebiete Fak. IV › Eingebettete Systeme und Rechnerarchitekturen / Embedded Systems and Computer Architectures | |
| WS 2026/27 | Wahlpflichtbereich › Studiengebiete Fak. IV › Eingebettete Systeme und Rechnerarchitekturen / Embedded Systems and Computer Architectures | |
| Industrial Engineering and Management Industrial Engineering and Management (M. Sc.) - StuPO 2015 | SS 2025 | Ingenieurwissenschaftliche Studienrichtungen/Engineering Majors › Informations- und Kommunikationssysteme/Information and Communication Systems (IKS) › Informations- und Kommunikationssysteme/Information and Communication Systems (Wahlpflicht/Compulsory-Elective) › Communication Systems |
| WS 2025/26 | Ingenieurwissenschaftliche Studienrichtungen/Engineering Majors › Informations- und Kommunikationssysteme/Information and Communication Systems (IKS) › Informations- und Kommunikationssysteme/Information and Communication Systems (Wahlpflicht/Compulsory-Elective) › Communication Systems | |
| SS 2026 | Ingenieurwissenschaftliche Studienrichtungen/Engineering Majors › Informations- und Kommunikationssysteme/Information and Communication Systems (IKS) › Informations- und Kommunikationssysteme/Information and Communication Systems (Wahlpflicht/Compulsory-Elective) › Communication Systems | |
| WS 2026/27 | Ingenieurwissenschaftliche Studienrichtungen/Engineering Majors › Informations- und Kommunikationssysteme/Information and Communication Systems (IKS) › Informations- und Kommunikationssysteme/Information and Communication Systems (Wahlpflicht/Compulsory-Elective) › Communication Systems | |
| Media Technology Media Technology (M. Sc.) - StuPO 2022 | SS 2025 | Wahlpflicht weitere Profibereiche › weiterer Profilbereich Elektronik, Photonik und Integrierte Systeme |
| WS 2025/26 | Wahlpflicht weitere Profibereiche › weiterer Profilbereich Elektronik, Photonik und Integrierte Systeme | |
| SS 2026 | Wahlpflicht weitere Profibereiche › weiterer Profilbereich Elektronik, Photonik und Integrierte Systeme | |
| WS 2026/27 | Wahlpflichtbereich › Profilbereich › Elektronik, Photonik und Integrierte Systeme |
Miscellaneous
The project is held in German with English materials. The lecture is held in English with English materials.