Project: Control of Smart Sensor SystemsModule description #41187 / Version 2
- 6 CP
- Portfolio examination
- Graded
- Winter and summer semester
- English
This module description is not valid in the current semester (Winter semester 2026/27).
Current version (v3)
| Module / Version | #41187 / #2 |
|---|---|
| Validity | Winter semester 2025/26 – Summer semester 2026 |
| Available language(s) | English, German |
| Credit points | 6 |
| Person responsible for the module | Thewes, Roland |
| Grading | Graded |
| Exam format | Portfolio examination |
| Language(s) of instruction | English |
Affiliation
| Faculty | Fakultät IV |
|---|---|
| Institute | Institut für Energie und Automatisierungstechnik |
| Academic chair | 34311700 FG Sensorik und Aktuatorik / Messtechnik |
Contact
| Office | E 3 |
|---|---|
| Contact person | Thaon de Saint André, Emil Arthur |
| E-mail address | lehre@se.tu-berlin.de |
| Website | https://www.tu.berlin/se |
Learning outcomes
This module's qualification aims are:
1. In depth understanding of sensors and sensor interfaces and their combination in order to enable smart sensors.
2. Proper handling of circuit design software like LTSpice, Cadence or KiCad. In addition Matlab or Scilab for model investigation or characterization.
3. Profound knowledge of control smart sensor systems via a µC.
4. Ability to analyze a metrological problems, to identify suitable methods to program optimized sensor related interfaces including documentation and critical discussion.
5. In depth understanding of sensor processing issues.
6. In case of technology related topics, students get a detailed insight in manufacturing of sensors.
1. In depth understanding of sensors and sensor interfaces and their combination in order to enable smart sensors.
2. Proper handling of circuit design software like LTSpice, Cadence or KiCad. In addition Matlab or Scilab for model investigation or characterization.
3. Profound knowledge of control smart sensor systems via a µC.
4. Ability to analyze a metrological problems, to identify suitable methods to program optimized sensor related interfaces including documentation and critical discussion.
5. In depth understanding of sensor processing issues.
6. In case of technology related topics, students get a detailed insight in manufacturing of sensors.
Content
Project topics will be identified during a first meeting with the supervisor. Students are encouraged to contribute their own ideas. Possible topics include sensor and sensor interface design as well as methods and techniques to process (fabricate) them. To realize a project in that area, software like LTSpice, KiCad, Cadence, Scilab or Matlab are used. Furthermore a well equipped laboratory enables experiments and realization of hardware. Students will work individually or in groups.
Module components
Compulsory area
The following courses are mandatory for this module:
| Courses | Type | Number | Frequency | Language | Hours per week | Course catalog |
|---|---|---|---|---|---|---|
| Control of Smart Sensor Systems | Project | Winter and summer semester | [en] | 4 | WS 2026/27 (1) ISIS |
Courses in the course catalog
Courses created from the teaching units of this module.
Winter semester 2026/27 (1)
Control of Smart Sensor Systems (Project) 1
- Control of Smart Sensor Systems (Projekt) Einführungsveranstaltung
Workload and credit points
Control of Smart Sensor Systems (Project)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Attendance | 15 | 4 h | 60 h |
| Pre/post processing | 15 | 8 h | 120 h |
| 180 h | |||
The workload of the module adds up to 180 hours. The module therefore comprises 6 credit points.
Description of teaching and learning methods
The module consists of a project. Course language is English, incl. all written works (reports, presentations, etc.).
Requirements for participation and examination
Desirable prerequisites for participation in the courses:
In order to be equipped with sufficient knowledge on sensors and sensor interfaces, the participation of "Measurement of Non-electrical Quantities" and/or "Smart Sensors and Actuators" is recommended.
Mandatory requirements for the module examination registration:
This module has no examination requirements.
Completion of the module
| Grading | Graded |
|---|---|
| Exam format | Portfolio examination |
| Type of portfolio examination | 100 points in total |
| Language | English |
Test elements
| Name | Points/Weight | Category | Duration/Extent |
|---|---|---|---|
| (Deliverable assessment) Presentation | 30 | oral | 30 minutes |
| (Deliverable assessment) Written report - project documentation | 50 | written | 10-20 pages |
| (Learning process review) 2 Milestone-Meetings - 10 points each | 20 | practical | 60 minutes |
Exam description
Written report: The written report has to satisfy the following requirements. The report should match the scientific standard of documentation. Furthermore it must contain an objective, methodology and a critical discussion of results.
Milestone-Meeting: This can be considered as a brief presentation during the project work. Preparation and presentation of the project state for a typical project meeting are assessed in this part.
Presentation: The presentation is composed of 20 minutes talk and a following discussion of about 10 minutes. The presentation will be evaluated regarding content, form and style.
Milestone-Meeting: This can be considered as a brief presentation during the project work. Preparation and presentation of the project state for a typical project meeting are assessed in this part.
Presentation: The presentation is composed of 20 minutes talk and a following discussion of about 10 minutes. The presentation will be evaluated regarding content, form and style.
Duration of the module
The following number of semesters is estimated for taking and completing the module: 1 semester(s).
This module can be started in the following semesters: Winter and summer semester.
Maximum number of participants
This module is not limited to a number of students.
Registration procedures
Registration for the module is handled through MOSES/MTS. Further information will be provided individually at the secretary's office.
Recommended reading, lecture notes
Lecture notes
unavailable
Electronic lecture notes
unavailable
Recommended literature
No recommended literature given
Assigned programs
This module version is used in the following programs:
| Program / program version | Semester(s) | Curriculum component |
|---|---|---|
| Computer Engineering Computer Engineering (M. Sc.) - StuPO 2015 | WS 2025/26 | Wahlpflicht Studiengebiete Fak. IV › Elektronik, Photonik und Integrierte Systeme / Electronics, Photonics and Integrated Systems |
| SS 2026 | Wahlpflicht Studiengebiete Fak. IV › Elektronik, Photonik und Integrierte Systeme / Electronics, Photonics and Integrated Systems | |
| Electrical Engineering Electrical Engineering (M. Sc.) - StuPO 2015 | WS 2025/26 | Wahlpflicht Studiengebiete Fak. IV › Elektronik, Photonik und Integrierte Systeme / Electronics, Photonics and Integrated Systems |
| SS 2026 | Wahlpflicht Studiengebiete Fak. IV › Automatisierungstechnik / Automation and Control | |
| Media Technology Media Technology (M. Sc.) - StuPO 2022 | WS 2025/26 | Wahlpflicht weitere Profibereiche › weiterer Profilbereich Elektronik, Photonik und Integrierte Systeme |
| SS 2026 | Wahlpflichtbereich Profilbereiche › Profilbereich Elektronik, Photonik und Integrierte Systeme |
Miscellaneous
Not specified