Assembly and Characterisation of BatteriesModule description #41234 / Version 6
- 6 CP
- Portfolio examination
- Graded
- Winter semester
- English
| Module / Version | #41234 / #6 |
|---|---|
| Validity | Since Winter semester 2025/26 |
| Available language(s) | English, German |
| Credit points | 6 |
| Person responsible for the module | Kowal, Julia |
| Grading | Graded |
| Exam format | Portfolio examination |
| Language(s) of instruction | English |
Affiliation
| Faculty | Fakultät IV |
|---|---|
| Institute | Institut für Energie und Automatisierungstechnik |
| Academic chair | 34312100 FG Elektrische Energiespeichertechnik (EET) |
Contact
| Office | EMH 2 |
|---|---|
| Contact person | Kowal, Julia |
| E-mail address | julia.kowal@tu-berlin.de |
| Website | http://www.eet.tu-berlin.de |
Learning outcomes
After completing this course, students are able to
- assemble basic electrochemical test setups,
- assemble small battery cells,
- conduct typical measuring methods used to characterise batteries, and
- design simple battery balancing systems.
- assemble basic electrochemical test setups,
- assemble small battery cells,
- conduct typical measuring methods used to characterise batteries, and
- design simple battery balancing systems.
Content
The laboratory assignments cover three areas of battery technology.
1. Cell assembly: First, classical electrochemical experiments are conducted in order to, then, assemble own lead-acid cells and lithium-ion coin cells.
2. Battery characterisation: Charge and discharge curves of commercial batteries are logged, measurements to determine capacity and internal resistance are conducted, and electrochemical impedance spectra are recorded.
3. Cell balancing: The balancing of multiple battery cells as part of the battery management is considered. Different states of charge are balanced using a compensation circuit.
During the laboratory assignments, students familiarise themselves with the chemistry lab and the glovebox as well as with conducting measurements using a variety of devices in the battery lab. In doing so, they also gather experience working with various battery technologies, designs, and sizes.
1. Cell assembly: First, classical electrochemical experiments are conducted in order to, then, assemble own lead-acid cells and lithium-ion coin cells.
2. Battery characterisation: Charge and discharge curves of commercial batteries are logged, measurements to determine capacity and internal resistance are conducted, and electrochemical impedance spectra are recorded.
3. Cell balancing: The balancing of multiple battery cells as part of the battery management is considered. Different states of charge are balanced using a compensation circuit.
During the laboratory assignments, students familiarise themselves with the chemistry lab and the glovebox as well as with conducting measurements using a variety of devices in the battery lab. In doing so, they also gather experience working with various battery technologies, designs, and sizes.
Module components
Compulsory area
The following courses are mandatory for this module:
| Courses | Type | Number | Frequency | Language | Hours per week | Course catalog |
|---|---|---|---|---|---|---|
| Bau und Vermessung von Batterien | Internship | 3431 L 9051 | Winter semester | [de] | 2 | WS 2026/27 (1) ISIS |
Courses in the course catalog
Courses created from the teaching units of this module.
Winter semester 2026/27 (1)
Bau und Vermessung von Batterien (Internship) 1
- Bau und Vermessung von Batterien (Praktikum) Introduction 3431 L 9051
Workload and credit points
Bau und Vermessung von Batterien (Internship)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Attendance | 8 | 4 h | 32 h |
| 32 h | |||
Course-independent workload
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Laboratory: follow-up work | 7 | 2 h | 14 h |
| Laboratory protocols | 7 | 10 h | 70 h |
| Laboratory: preparation | 7 | 2 h | 14 h |
| Pre-tasks | 6 | 6 h | 36 h |
| 134 h | |||
The workload of the module adds up to 166 hours. The module therefore comprises 6 credit points.
Description of teaching and learning methods
This course consists of an introductory meeting (attendance strongly recommended!) and seven subsequent laboratory assignments, four hours each. The knowledge transfer is achieved via comprehensive written instructions including theoretical considerations as well as via laboratory practice and exchange with fellow group members and tutors during the assignments. To consolidate the gained knowledge, pre-tasks are to be submitted in written form prior to each assignment and protocols focussing on experimental procedure and evaluation need to be created and handed in after each assignment. The final grade consists of the assessment of all pre-tasks and laboratory protocols for each group.
Requirements for participation and examination
Desirable prerequisites for participation in the courses:
The modul language is mainly English. All documents are written in English; all parts of the exam should be submitted in English, alternatively in German. During the experiments, the language is adapted to the participants.
Course requirements:
- successful completion of the course "Grundlagen Batterietechnik" (or similar qualification)
- proficiency in MATLAB/Simulink (or similar software)
Please note: This course covers topics from the field of electrical engineering. Knowledge of basic electrical principles (the theory of electric networks in particular) is mandatory.
Course requirements:
- successful completion of the course "Grundlagen Batterietechnik" (or similar qualification)
- proficiency in MATLAB/Simulink (or similar software)
Please note: This course covers topics from the field of electrical engineering. Knowledge of basic electrical principles (the theory of electric networks in particular) is mandatory.
Mandatory requirements for the module examination registration:
This module has no examination requirements.
Completion of the module
| Grading | Graded |
|---|---|
| Exam format | Portfolio examination |
| Type of portfolio examination | 100 points in total |
| Language | English, German |
Test elements
| Name | Points/Weight | Category | Duration/Extent |
|---|---|---|---|
| (Deliverable assessment) 6 pre-tasks at 5 points each | 30 | written | 5 pages per assignment |
| (Deliverable assessment) 7 laboratory protocols at 10 points each | 70 | written | 20 pages per assignment |
Exam description
A total of 100 portfolio points can be reached:
- 6 pre-tasks at 5 points each
- 7 laboratory protocols at 10 points each
All parts of the exam are submitted in groups of 2 to 4 students.
The final grade is calculated according to § 68 (2) AllgStuPO and uses the following grading scale:
90 85 80 75 70 65 60 55 50 45
1.0 1.3 1.7 2.0 2.3 2.7 3.0 3.3 3.7 4.0
- 6 pre-tasks at 5 points each
- 7 laboratory protocols at 10 points each
All parts of the exam are submitted in groups of 2 to 4 students.
The final grade is calculated according to § 68 (2) AllgStuPO and uses the following grading scale:
90 85 80 75 70 65 60 55 50 45
1.0 1.3 1.7 2.0 2.3 2.7 3.0 3.3 3.7 4.0
Duration of the module
The following number of semesters is estimated for taking and completing the module: 1 semester(s).
This module can be started in the following semesters: Winter semester.
Maximum number of participants
The maximum capacity of participants is 24.
Registration procedures
Attendance of introductory meeting for course registration and group assignment. Registration for the exam via MOSES.
Recommended reading, lecture notes
Lecture notes
unavailable
Electronic lecture notes
available – Available on ISIS
Recommended literature
No recommended literature given
Assigned programs
This module version is used in the following programs:
| Program / program version | Semester(s) | Curriculum component |
|---|---|---|
| Automotive Systems Automotive Systems (M. Sc.) - StuPO 2017 | WS 2025/26 | Wahlpflichtbereich |
| SS 2026 | Wahlpflichtbereich | |
| WS 2026/27 | Wahlpflichtbereich | |
| Computer Engineering Computer Engineering (M. Sc.) - StuPO 2015 | WS 2025/26 | Wahlpflicht Studiengebiete Fak. IV › Elektrische Energietechnik / Electrical Power Engineering |
| SS 2026 | Wahlpflicht Studiengebiete Fak. IV › Elektrische Energietechnik / Electrical Power Engineering | |
| WS 2026/27 | Wahlpflichtbereich › Studiengebiete Fak. IV › Elektrische Energietechnik / Electrical Power Engineering | |
| Electrical Engineering Electrical Engineering (M. Sc.) - StuPO 2015 | WS 2025/26 | Wahlpflicht Studiengebiet Elektrische Energietechnik / Electrical Power Engineering › Wahlpflicht Elektrische Energietechnik / Electrical Power Engineering |
| SS 2026 | Wahlpflicht Studiengebiete Fak. IV › Elektrische Energietechnik / Electrical Power Engineering | |
| WS 2026/27 | Wahlpflichtbereich › Studiengebiete Fak. IV › Elektrische Energietechnik / Electrical Power Engineering | |
| Industrial Engineering and Management Industrial Engineering and Management (M. Sc.) - StuPO 2015 | WS 2025/26 | Ingenieurwissenschaftliche Studienrichtungen/Engineering Majors › Chemie und Verfahrenstechnik/Chemistry and Process Engineering (CVT) › Chemie und Verfahrenstechnik/Chemistry and Process Engineering (Wahlpflicht/Compulsory-Elective) |
| SS 2026 | Ingenieurwissenschaftliche Studienrichtungen/Engineering Majors › Energie und Ressourcen/Energy and Resources (ER) › Energie und Ressourcen/Energy and Resources (Wahlpflicht/Compulsory-Elective) › Energy | |
| WS 2026/27 | Ingenieurwissenschaftliche Studienrichtungen/Engineering Majors › Chemie und Verfahrenstechnik/Chemistry and Process Engineering (CVT) › Chemie und Verfahrenstechnik/Chemistry and Process Engineering (Wahlpflicht/Compulsory-Elective) | |
| Industrial Engineering and Management Industrial Engineering and Management (M. Sc.) - StuPO 2026 | WS 2026/27 | Engineering Sciences / Specialization › Energy and Resources › Energy and Resources (Compulsory Electives) › Energy |
| Regenerative Energy Systems StuPO 2023 | SS 2026 | Wahlpflichtmodule › Praxis RES › Labore |
| WS 2026/27 | Wahlpflichtmodule › Praxis RES › Labore |
Miscellaneous
Not specified