Automated DrivingModule description #50016 / Version 10
- 12 CP
- Portfolio examination
- Graded
- Winter and summer semester
- English, German
| Module / Version | #50016 / #10 |
|---|---|
| Validity | Since Summer semester 2026 |
| Available language(s) | English, German |
| Credit points | 12 |
| Person responsible for the module | Müller, Steffen |
| Grading | Graded |
| Exam format | Portfolio examination |
| Language(s) of instruction | English, German |
Affiliation
| Faculty | Fakultät V |
|---|---|
| Institute | Institut für Land- und Seeverkehr |
| Academic chair | 35332200 FG Kraftfahrzeuge (Müller) |
Contact
| Office | TIB 13 |
|---|---|
| Contact person | Wülfing, Ingo Martin |
| E-mail address | wuelfing@tu-berlin.de |
| Website | https://www.tu.berlin/kfz/studium-lehre/lehrangebote/modulliste-master/automatisiertes-fahren |
Learning outcomes
Attending this course enables students to gain a basic understanding of the technical challenges of automated driving. Students of this subject can make basic statements on the use of actuators, sensors, signal processing and control in automated vehicles. Some of the technical challenges can be dealt with independently.
- Knowledge of the requirements for automated vehicles
- Knowledge of the functionality and ability to design actuators and sensors in principle in
automated motor vehicles
- Knowledge of and ability to carry out image processing methods
- Knowledge and ability of path planning and path following control
- Expertise in project-oriented group work
- Expertise in the application of project management methods in the conflicting areas of cost, time and quality,
function
- Knowledge of the requirements for automated vehicles
- Knowledge of the functionality and ability to design actuators and sensors in principle in
automated motor vehicles
- Knowledge of and ability to carry out image processing methods
- Knowledge and ability of path planning and path following control
- Expertise in project-oriented group work
- Expertise in the application of project management methods in the conflicting areas of cost, time and quality,
function
Content
The course deals with the development of automated driving functions, their implementation in the simulation and in the vehicle as well as proofing the performance within the framework of a national student competition.
Development scopes are to be specified and tested in the simulation. The development results are then implemented and tested in a scaled test vehicle. LV students can take part in a student competition in which they present the test vehicle and demonstrate its functional quality in direct comparison with other teams. The scope of development work to be carried out includes vehicle dynamics, design, actuators, sensors, signal processing, control and information technology.
The technical objective of the course is to provide a sound insight into the technical challenges of automated driving and the implementation of automated driving functions in a test vehicle. In addition to the technical topics, methods for project and conflict management are to be learnt and applied by the students as part of the required group work. Regular presentation dates and the required project documentation also lay important foundations for improving students' written and oral communication skills.
Development scopes are to be specified and tested in the simulation. The development results are then implemented and tested in a scaled test vehicle. LV students can take part in a student competition in which they present the test vehicle and demonstrate its functional quality in direct comparison with other teams. The scope of development work to be carried out includes vehicle dynamics, design, actuators, sensors, signal processing, control and information technology.
The technical objective of the course is to provide a sound insight into the technical challenges of automated driving and the implementation of automated driving functions in a test vehicle. In addition to the technical topics, methods for project and conflict management are to be learnt and applied by the students as part of the required group work. Regular presentation dates and the required project documentation also lay important foundations for improving students' written and oral communication skills.
Module components
Compulsory area
The following courses are mandatory for this module:
| Courses | Type | Number | Frequency | Language | Hours per week | Course catalog |
|---|---|---|---|---|---|---|
| Automatisiertes Fahren I | Project | 3533 L 679 | Summer semester | [de] | 4 | ISIS |
| Automatisiertes Fahren II | Project | 3533 L 680 | Winter semester | [de] | 4 | WS 2026/27 (1) ISIS |
Courses in the course catalog
Courses created from the teaching units of this module.
Winter semester 2026/27 (1)
Automatisiertes Fahren II (Project) 1
- Automatisiertes Fahren II (Projekt) Termingruppe 1 3533 L 680
Workload and credit points
Automatisiertes Fahren I (Project)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Attendance time | 15 | 4 h | 60 h |
| Preparation/follow-up | 15 | 8 h | 120 h |
| 180 h | |||
Automatisiertes Fahren II (Project)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Attendance time | 15 | 4 h | 60 h |
| Preparation/follow-up | 15 | 8 h | 120 h |
| 180 h | |||
The workload of the module adds up to 360 hours. The module therefore comprises 12 credit points.
Description of teaching and learning methods
Intensive individual support during the semester, various sub tasks in the respective project group.
Requirements for participation and examination
Desirable prerequisites for participation in the courses:
Knowledge of the fundamentals of automotive engineering and the fundamentals of control engineering, e.g. acquired by attending the courses "Fundamentals of Vehicle Dynamics", "Matlab/Simulink on Examples from Vehicle Dynamics", "Vehicle Dynamics in Industrial Applications", "Vehicle Mechatronics" and "Vehicle Control", is helpful for the course. Programming skills are also helpful.
Ideally, the modelling and simulation of vehicle engineering and control engineering problems should be known and already practised.
A good knowledge of the German language and the ability to abstract in technical contexts are also required. The two courses can only be completed as a whole.
Ideally, the modelling and simulation of vehicle engineering and control engineering problems should be known and already practised.
A good knowledge of the German language and the ability to abstract in technical contexts are also required. The two courses can only be completed as a whole.
Mandatory requirements for the module examination registration:
This module has no examination requirements.
Completion of the module
| Grading | Graded |
|---|---|
| Exam format | Portfolio examination |
| Type of portfolio examination | 100 points per element |
| Language | English, German |
Test elements
| Name | Points/Weight | Category | Duration/Extent |
|---|---|---|---|
| 4 presentations per semester | 12 | oral | <20 min |
| Labour contribution, performance and results | 36 | written | at least 10 pages |
| Consultation | 12 | oral | <20 min |
Exam description
The project objectives will be redefined and communicated at the beginning of the course. The examination elements are listed below and weighted to determine the examination grade:
- 4 presentations per semester (20%, 12 points)
- Work contribution, performance and results (60%, 36 points)
- Final consultation (20%, 12 points)
The submission of documentation and participation in at least 3 of 4 presentations per semester is a prerequisite for admission to the final consultation.
Total number of points: 60 points
Points Grade
More than or equal to 57 1.0
More than or equal to 54 1.3
More than or equal to 51 1.7
More than or equal to 48 2.0
More or equal to 45 2.3
More or equal 42 2.7
More or equal 39 3.0
More or equal to 36 3.3
More or equal 33 3.7
More or equal to 30 4.0
Less than 30 5.0
- 4 presentations per semester (20%, 12 points)
- Work contribution, performance and results (60%, 36 points)
- Final consultation (20%, 12 points)
The submission of documentation and participation in at least 3 of 4 presentations per semester is a prerequisite for admission to the final consultation.
Total number of points: 60 points
Points Grade
More than or equal to 57 1.0
More than or equal to 54 1.3
More than or equal to 51 1.7
More than or equal to 48 2.0
More or equal to 45 2.3
More or equal 42 2.7
More or equal 39 3.0
More or equal to 36 3.3
More or equal 33 3.7
More or equal to 30 4.0
Less than 30 5.0
Duration of the module
The following number of semesters is estimated for taking and completing the module: 2 semester(s).
This module can be started in the following semesters: Winter and summer semester.
Maximum number of participants
The maximum capacity of participants is 15.
Registration procedures
Registration for the course is study programme-specific. In the Master's degree programme in Automotive Engineering, registration usually takes place via QISPOS.
The registration deadline will be announced at the start of the course.
Prior registration via e-mail to wuelfing@tu-berlin.de or via ISIS course self-enrolment is mandatory.
The group allocation for the projects takes place in the first session.
The registration deadline will be announced at the start of the course.
Prior registration via e-mail to wuelfing@tu-berlin.de or via ISIS course self-enrolment is mandatory.
The group allocation for the projects takes place in the first session.
Recommended reading, lecture notes
Lecture notes
unavailable
Electronic lecture notes
unavailable
Recommended literature
- [1] Lunze, Jan: Regelungstechnik 1, Springer Verlag, 2010
- [2] Lunze, Jan: Regelungstechnik 2, Springer Verlag, 2010
- [3] Mayr, Robert: Regelungsstrategien für die automatische Fahrzeugführung, Springer Verlag, 2000
- [4] Schramm, Dieter: Modellbildung und Simulation der Dynamik von Kraftfahrzeugen, Springer Verlag, 2010
- [5] Isermann, Rolf: Fahrdynamikregelung, Springer Verlag, 2006
- [6] Mitschke, Manfred: Dynamik der Kraftfahrzeuge, Springer Verlag, 2004
- [7] Winner, Hermann: Handbuch Fahrerassistenzsysteme, Vieweg + Teubner, 2009
Assigned programs
This module version is used in the following programs:
| Program / program version | Semester(s) | Curriculum component |
|---|---|---|
| Automotive Systems Automotive Systems (M. Sc.) - StuPO 2017 | SS 2026 | Wahlpflichtbereich |
| Computational Engineering Science (Informationstechnik im Maschinenwesen) StuPO 2018 (17.01.2018) | SS 2026 | 4. Profilbereich › 4.2 Profilbereich: Konstruktion und Fertigung › 4.2c Produktorientierte Fächer |
| Computer Engineering Computer Engineering (M. Sc.) - StuPO 2015 | SS 2026 | Wahlpflicht Studiengebiete Fak. IV › Automatisierungstechnik / Automation and Control |
| Electrical Engineering Electrical Engineering (M. Sc.) - StuPO 2015 | SS 2026 | Wahlpflicht Studiengebiet Automatisierungstechnik / Automation and Control › Wahlpflicht Automatisierungstechnik / Automation and Control |
| Engineering Science StuPO 2007 (19.12.2007) | SS 2026 | 2.3 Mechatronik › 2.3b Ergänzungsbereich |
| Engineering Science StuPO 2020 | SS 2026 | 2.3 Mechatronik › 2.3b Ergänzungsbereich |
| Patent Engineering StuPO 2015 | SS 2026 | 2.2. Ingenieurwissenschaftliche Profilmodule › 2.2.3. Produkte |
| Vehicle Engineering StuPO 2017 | SS 2026 | 2. Profilmodule › 2.2 Kraftfahrzeugtechnik |
Miscellaneous
Entry is possible in any semester. The module language is German.