Skip to content
Technische Universität Berlin Deutsch
Course catalog and module transfer system

Automated DrivingModule description #50016 / Version 9

← Module page Deutsche Fassung
This module description is not valid in the current semester (Winter semester 2026/27). Current version (v12)
Module / Version#50016 / #9
ValiditySummer semester 2025 – Winter semester 2025/26
Available language(s)German
Credit points12
Person responsible for the moduleMüller, Steffen
GradingGraded
Exam formatPortfolio examination
Language(s) of instructionGerman

Affiliation

FacultyFakultät V
InstituteInstitut für Land- und Seeverkehr
Academic chair35332200 FG Kraftfahrzeuge (Müller)

Contact

OfficeTIB 13
Contact personWülfing, Ingo Martin
E-mail addresswuelfing@tu-berlin.de
Websitehttps://www.tu.berlin/kfz/studium-lehre/lehrangebote/modulliste-master/automatisiertes-fahren

Learning outcomes

Attending this course enables students to gain a basic understanding of the technical challenges of automated driving. Students of this subject can make basic statements on the use of actuators, sensors, signal processing and control in automated vehicles. Some of the technical challenges can be dealt with independently.

- Knowledge of the requirements for automated vehicles
- Knowledge of the functionality and ability to design actuators and sensors in principle in
automated motor vehicles
- Knowledge of and ability to carry out image processing methods
- Knowledge and ability of path planning and path following control
- Expertise in project-oriented group work
- Expertise in the application of project management methods in the conflicting areas of cost, time and quality,
function

Content

The course deals with the development of automated driving functions, their implementation in the simulation and in the vehicle as well as proofing the performance within the framework of a national student competition.

Development scopes are to be specified and tested in the simulation. The development results are then implemented and tested in a scaled test vehicle. LV students can take part in a student competition in which they present the test vehicle and demonstrate its functional quality in direct comparison with other teams. The scope of development work to be carried out includes vehicle dynamics, design, actuators, sensors, signal processing, control and information technology.
The technical objective of the course is to provide a sound insight into the technical challenges of automated driving and the implementation of automated driving functions in a test vehicle. In addition to the technical topics, methods for project and conflict management are to be learnt and applied by the students as part of the required group work. Regular presentation dates and the required project documentation also lay important foundations for improving students' written and oral communication skills.

Module components

Compulsory area

The following courses are mandatory for this module:

CoursesTypeNumberFrequencyLanguageHours per weekCourse catalog
Automatisiertes Fahren IProject3533 L 679 Summer semester[de]4 ISIS
Automatisiertes Fahren IIProject3533 L 680 Winter semester[de]4 ISIS

Courses in the course catalog

Courses created from the teaching units of this module.

Winter semester 2026/27 (1)

Automatisiertes Fahren II (Project) 1

All groups of this course in the catalog

Workload and credit points

Automatisiertes Fahren I (Project)

Workload descriptionMultiplierHoursTotal
Attendance time154 h60 h
Preparation/follow-up158 h120 h
180 h

Automatisiertes Fahren II (Project)

Workload descriptionMultiplierHoursTotal
Attendance time154 h60 h
Preparation/follow-up158 h120 h
180 h

The workload of the module adds up to 360 hours. The module therefore comprises 12 credit points.

Description of teaching and learning methods

Intensive individual support during the semester, various sub tasks in the respective project group.

Requirements for participation and examination

Desirable prerequisites for participation in the courses:

Knowledge of the fundamentals of automotive engineering and the fundamentals of control engineering, e.g. acquired by attending the courses "Fundamentals of Vehicle Dynamics", "Matlab/Simulink on Examples from Vehicle Dynamics", "Vehicle Dynamics in Industrial Applications", "Vehicle Mechatronics" and "Vehicle Control", is helpful for the course. Programming skills are also helpful.

Ideally, the modelling and simulation of vehicle engineering and control engineering problems should be known and already practised.

A good knowledge of the German language and the ability to abstract in technical contexts are also required. The two courses can only be completed as a whole.

Mandatory requirements for the module examination registration:

This module has no examination requirements.

Completion of the module

GradingGraded
Exam formatPortfolio examination
Type of portfolio examination100 points per element
LanguageEnglish, German

Test elements

NamePoints/WeightCategoryDuration/Extent
4 presentations per semester12oral<20 min
Labour contribution, performance and results36writtenat least 10 pages
Consultation12oral<20 min

Exam description

The project objectives will be redefined and communicated at the beginning of the course. The examination elements are listed below and weighted to determine the examination grade:

- 4 presentations per semester (20%, 12 points)
- Work contribution, performance and results (60%, 36 points)
- Final consultation (20%, 12 points)

The submission of documentation and participation in at least 3 of 4 presentations per semester is a prerequisite for admission to the final consultation.


Total number of points: 60 points

Points Grade
More than or equal to 57 1.0
More than or equal to 54 1.3
More than or equal to 51 1.7
More than or equal to 48 2.0
More or equal to 45 2.3
More or equal 42 2.7
More or equal 39 3.0
More or equal to 36 3.3
More or equal 33 3.7
More or equal to 30 4.0
Less than 30 5.0

Duration of the module

The following number of semesters is estimated for taking and completing the module: 2 semester(s).

This module can be started in the following semesters: Winter and summer semester.

Maximum number of participants

The maximum capacity of participants is 15.

Registration procedures

Registration for the course is study programme-specific. In the Master's degree programme in Automotive Engineering, registration usually takes place via QISPOS.
The registration deadline will be announced at the start of the course.
Prior registration via e-mail to wuelfing@tu-berlin.de or via ISIS course self-enrolment is mandatory.
The group allocation for the projects takes place in the first session.

Recommended reading, lecture notes

Lecture notes

unavailable

Electronic lecture notes

unavailable

Recommended literature

  • [1] Lunze, Jan: Regelungstechnik 1, Springer Verlag, 2010
  • [2] Lunze, Jan: Regelungstechnik 2, Springer Verlag, 2010
  • [3] Mayr, Robert: Regelungsstrategien für die automatische Fahrzeugführung, Springer Verlag, 2000
  • [4] Schramm, Dieter: Modellbildung und Simulation der Dynamik von Kraftfahrzeugen, Springer Verlag, 2010
  • [5] Isermann, Rolf: Fahrdynamikregelung, Springer Verlag, 2006
  • [6] Mitschke, Manfred: Dynamik der Kraftfahrzeuge, Springer Verlag, 2004
  • [7] Winner, Hermann: Handbuch Fahrerassistenzsysteme, Vieweg + Teubner, 2009

Assigned programs

This module version is used in the following programs:

Program / program versionSemester(s)Curriculum component
Automotive Systems
Automotive Systems (M. Sc.) - StuPO 2017
SS 2025Wahlpflichtbereich
WS 2025/26Wahlpflichtbereich
Computational Engineering Science (Informationstechnik im Maschinenwesen)
StuPO 2018 (17.01.2018)
SS 20254. Profilbereich › 4.2 Profilbereich: Konstruktion und Fertigung › 4.2c Produktorientierte Fächer
WS 2025/264. Profilbereich › 4.2 Profilbereich: Konstruktion und Fertigung › 4.2c Produktorientierte Fächer
Computer Engineering
Computer Engineering (M. Sc.) - StuPO 2015
SS 2025Wahlpflicht Studiengebiete Fak. IV › Automatisierungstechnik / Automation and Control
WS 2025/26Wahlpflicht Studiengebiet A › Automatisierungstechnik / Automation and Control
Electrical Engineering
Electrical Engineering (M. Sc.) - StuPO 2015
SS 2025Wahlpflicht Studiengebiete Fak. IV › Automatisierungstechnik / Automation and Control
WS 2025/26Wahlpflicht Studiengebiete Fak. IV › Automatisierungstechnik / Automation and Control
Engineering Science
StuPO 2007 (19.12.2007)
SS 20252.3 Mechatronik › 2.3b Ergänzungsbereich
WS 2025/262.3 Mechatronik › 2.3b Ergänzungsbereich
Engineering Science
StuPO 2020
SS 20252.3 Mechatronik › 2.3b Ergänzungsbereich
WS 2025/262.3 Mechatronik › 2.3b Ergänzungsbereich
Mechanical Engineering
StuPO 2017
SS 2025Wahlpflichtmodule › Profilmodule › Produkte
WS 2025/26Wahlpflichtmodule › Profilmodule › Produkte
SS 2026Wahlpflichtmodule › Profilmodule › Produkte
Patent Engineering
StuPO 2015
SS 20252.2. Ingenieurwissenschaftliche Profilmodule › 2.2.3. Produkte
WS 2025/262.2. Ingenieurwissenschaftliche Profilmodule › 2.2.3. Produkte
Vehicle Engineering
StuPO 2017
SS 20252. Profilmodule › 2.2 Kraftfahrzeugtechnik
WS 2025/262. Profilmodule › 2.2 Kraftfahrzeugtechnik

Miscellaneous

Entry is possible in any semester. The module language is German.