Skip to content
Technische Universität Berlin Deutsch
Course catalog and module transfer system

Applied Data Science for Cyber-Physical SystemsModule description #50020 / Version 6

← Module page Deutsche Fassung
This module description is not valid in the current semester (Winter semester 2026/27). Current version (v8)
Module / Version#50020 / #6
ValiditySummer semester 2025 – Summer semester 2026
Available language(s)English, German
Credit points6
Person responsible for the moduleJochem, Roland
GradingGraded
Exam formatPortfolio examination
Language(s) of instructionGerman

Affiliation

FacultyFakultät V
InstituteInstitut für Werkzeugmaschinen und Fabrikbetrieb (IWF)
Academic chair35361300 FG Qualitätswissenschaft

Contact

OfficePTZ 3
Contact personAndrushchenko, Elena
E-mail addresse.andrushchenko@tu-berlin.de
Websitehttps://www.tu.berlin/qw/studium-lehre/lehrveranstaltungen/dcps-applied-data-science-for-cyber-physical-systems-1

Learning outcomes

Participants will be equipped to conduct targeted quality-related data collection and analysis in the context of the increasing digitalization of traditional industries, commonly referred to as Industry 4.0. The technical foundation of this module is based on the integration of informatics and software components with mechanical and electronic elements, which communicate via a data infrastructure such as the Internet. This interconnected system is referred to as a cyber-physical system (CPS).
Throughout the module, participants will learn to predict the quality-relevant behavior of CPS by applying statistical and stochastic methods. A complete data analysis cycle will be conducted, focusing on both technical and analytical aspects to ensure a comprehensive understanding of the data-driven decision-making process.

Content

Part 1: Preparation for Project Execution through Methodological Deepening
- Fundamentals of technical data collection
- Basics of IT infrastructure for storing and analyzing large datasets
- Introduction to the use of the statistical software R in the CPS context
- Fundamentals of machine learning methods and techniques

Part 2: Project Execution on a Real CPS for Predicting Quality-Relevant Behavior
- Technical planning, execution, and data collection on the CPS
- Technical and logical data storage
- Data analysis
- Development of predictive models for decision-making regarding the quality-relevant behavior of the CPS

Module components

Mandatory Component

The following courses are mandatory for this module:

CoursesTypeNumberFrequencyLanguageHours per weekCourse catalog
Applied Data Science for Cyber-Physical SystemsProject0536 L 316 Winter and summer semester[en, de]4 ISIS

Workload and credit points

Applied Data Science for Cyber-Physical Systems (Project)

Workload descriptionMultiplierHoursTotal
Self-Study for Methodological Deepening140 h40 h
Self-study for Presentation Preparation110 h10 h
Project Execution: Final Presentation and Project Documentation130 h30 h
Project Execution: Group Project Work1100 h100 h
180 h

The workload of the module adds up to 180 hours. The module therefore comprises 6 credit points.

Description of teaching and learning methods

Group Work and Expert Puzzle in Project Execution

Part 1: Group Work
The foundational concepts for project execution will be developed in topic-specific groups. The results will be presented to the participants of the course to ensure shared understanding and knowledge exchange.

Part 2: Expert Puzzle for Project Execution
Following the topic-specific group work, new groups will be formed using the expert puzzle method. These groups will independently work on a real cyber-physical system (CPS) within the Quality Science Lab, focusing on developing predictive models for various quality or reliability characteristics. The results must be visualized and presented to the course participants through presentations. Additionally, a project report must be submitted, documenting both the approach and results of the project execution as well as the technical implementation.

Requirements for participation and examination

Desirable prerequisites for participation in the courses:

Basic programming skills, knowledge of CAD, or project management are helpful (Guidance for independent familiarization will be provided at the beginning of the course). Beneficial additional skills include control engineering, sensor technology, microcontroller programming, database systems, statistics, and machine learning methods.

Mandatory requirements for the module examination registration:

This module has no examination requirements.

Completion of the module

GradingGraded
Exam formatPortfolio examination
Type of portfolio examination100 points in total
LanguageGerman

Test elements

NamePoints/WeightCategoryDuration/Extent
Practical Work15flexibeln/a
Presentation 1 (15 minutes)10oral30 min
Presentation 2 (30 minutes)25oral30 min
Project Documentation50writtenn/a

Exam description

Two Presentations, Practical Work, and Project Documentation

The following grading scale is applied:
Grade From Percentage
5.0 0.00%
4.0 50.00%
3.7 55.00%
3.3 60.00%
3.0 65.00%
2.7 70.00%
2.3 75.00%
2.0 80.00%
1.7 85.00%
1.3 90.00%
1.0 95.00%

Duration of the module

The following number of semesters is estimated for taking and completing the module: 1 semester(s).

This module can be started in the following semesters: Winter and summer semester.

Maximum number of participants

The maximum capacity of participants is 15.

Registration procedures

Application for Participation in the Course:
• Written application required at least one week before the start of lectures.

Course Registration:
- During the first week of lectures.

Group Assignment for Methodological Deepening:
- During the first week after the semester begins.

Exam Registration:
- Online via QISPOS or using the yellow registration form.
- The specific registration deadlines can be found in the study regulations.

Recommended reading, lecture notes

Lecture notes

unavailable

Electronic lecture notes

unavailable

Recommended literature

No recommended literature given

Assigned programs

This module version is used in the following programs:

Program / program versionSemester(s)Curriculum component
Computational Engineering Science (Informationstechnik im Maschinenwesen)
StuPO 2018 (17.01.2018)
SS 20254. Profilbereich › 4.2 Profilbereich: Konstruktion und Fertigung › 4.2b Produktionstechnik
WS 2025/264. Profilbereich › 4.2 Profilbereich: Konstruktion und Fertigung › 4.2b Produktionstechnik
SS 20264. Profilbereich › 4.2 Profilbereich: Konstruktion und Fertigung › 4.2b Produktionstechnik
Engineering Science
StuPO 2007 (19.12.2007)
SS 20252.3 Mechatronik › 2.3b Ergänzungsbereich
WS 2025/262.3 Mechatronik › 2.3b Ergänzungsbereich
SS 20262.3 Mechatronik › 2.3b Ergänzungsbereich
Engineering Science
StuPO 2020
SS 20252.1 Numerik und Simulation › 2.1b Ergänzungsbereich
WS 2025/262.3 Mechatronik › 2.3b Ergänzungsbereich
SS 20262.3 Mechatronik › 2.3b Ergänzungsbereich
Industrial Engineering and Management
Industrial Engineering and Management (M. Sc.) - StuPO 2015
SS 2025Ingenieurwissenschaftliche Studienrichtungen/Engineering Majors › Maschinenbau/Mechanical Engineering (MB) › Maschinenbau/Mechanical Engineering (Wahlpflicht/Compulsory-Elective) › Automation and Industrial Information Technology
WS 2025/26Ingenieurwissenschaftliche Studienrichtungen/Engineering Majors › Maschinenbau/Mechanical Engineering (MB) › Maschinenbau/Mechanical Engineering (Wahlpflicht/Compulsory-Elective) › Automation and Industrial Information Technology
SS 2026Ingenieurwissenschaftliche Studienrichtungen/Engineering Majors › Maschinenbau/Mechanical Engineering (MB) › Maschinenbau/Mechanical Engineering (Wahlpflicht/Compulsory-Elective) › Automation and Industrial Information Technology
Mechanical Engineering
StuPO 2017
SS 2025Wahlpflichtmodule › Profilmodule › Informationstechnische und rechnergestützte Modellierung
WS 2025/26Wahlpflichtmodule › Profilmodule › Informationstechnische und rechnergestützte Modellierung
SS 2026Wahlpflichtmodule › Kernmodule › Werkzeugmaschinen und Anlagentechnik
Patent Engineering
StuPO 2015
SS 20252.2. Ingenieurwissenschaftliche Profilmodule › 2.2.2. Informationstechnische und rechnergestützte Modellierung
WS 2025/262.2. Ingenieurwissenschaftliche Profilmodule › 2.2.2. Informationstechnische und rechnergestützte Modellierung
SS 20262.2. Ingenieurwissenschaftliche Profilmodule › 2.2.2. Informationstechnische und rechnergestützte Modellierung
Production Engineering
StuPO 2018 (09.05.2018)
SS 20254. Profilmodule › 4.2 Automatisierungs- und Informationstechnik
WS 2025/264. Profilmodule › 4.2 Automatisierungs- und Informationstechnik
SS 20264. Profilmodule › 4.2 Automatisierungs- und Informationstechnik
Technomathematics
Technomathematics (M. Sc.) - StuPO 2014
SS 2025Studienrichtungen › Physikalische Ingenieurwissenschaft › Physikalische Ingenieurwissenschaft › Mechatronik
WS 2025/26Studienrichtungen › Physikalische Ingenieurwissenschaft › Physikalische Ingenieurwissenschaft › Mechatronik
SS 2026Studienrichtungen › Maschinenbau › Maschinenbau › Kernmodule

Miscellaneous

Not specified