Applied Data Science for Reliability EngineeringModule description #50021 / Version 3
- 6 CP
- Portfolio examination
- Graded
- Summer semester
- German
| Module / Version | #50021 / #3 |
|---|---|
| Validity | Since Summer semester 2025 |
| Available language(s) | German |
| Credit points | 6 |
| Person responsible for the module | Jochem, Roland |
| Grading | Graded |
| Exam format | Portfolio examination |
| Language(s) of instruction | German |
Affiliation
| Faculty | Fakultät V |
|---|---|
| Institute | Institut für Werkzeugmaschinen und Fabrikbetrieb (IWF) |
| Academic chair | 35361300 FG Qualitätswissenschaft |
Contact
| Office | PTZ 3 |
|---|---|
| Contact person | Mayer, Jan Pascal |
| E-mail address | j.mayer@tu-berlin.de |
| Website | https://www.tu.berlin/qw/studium-lehre/lehrveranstaltungen/dre-applied-data-science-for-reliability-engineering |
Learning outcomes
Products are becoming increasingly complex due to their expanding range of functionalities, which in turn raises their susceptibility to errors. As a result, there is a need for companies-particularly for reasons of legal liability and to reduce warranty claims-to adopt methods that enable them to predict potential risks of functional failures and increase product reliability. Reliability is therefore one of the most important characteristics of today’s products and constitutes a key aspect and integral component of quality.
Reliability is not deterministic but can only be operationalized through probabilities. Accordingly, analysis can only be conducted successfully using data science methods. In this course, future engineers will acquire the technical and methodological skills needed to determine reliability. The fundamentals learned in “Applied Data Science for Quality Engineering” will be applied in a practical, real-world context. Students will be equipped to independently develop software solutions for reliability analysis. To this end, the course includes working on a case study with the R programming language and developing solutions through an interactive web application.
These competencies will enable students to take on tasks in reliability analysis, as well as to manage, coordinate, and successfully complete them in the future.
Reliability is not deterministic but can only be operationalized through probabilities. Accordingly, analysis can only be conducted successfully using data science methods. In this course, future engineers will acquire the technical and methodological skills needed to determine reliability. The fundamentals learned in “Applied Data Science for Quality Engineering” will be applied in a practical, real-world context. Students will be equipped to independently develop software solutions for reliability analysis. To this end, the course includes working on a case study with the R programming language and developing solutions through an interactive web application.
These competencies will enable students to take on tasks in reliability analysis, as well as to manage, coordinate, and successfully complete them in the future.
Content
The Weibull Distribution as the Basis for Lifetime Analysis
- Description, behavior, and interpretation of the Weibull distribution
- Description, behavior, and interpretation of its density function
- Failure rates based on the Weibull distribution
Calculating the Weibull Distribution Using Estimation Procedures (Ranking - Estimator - Regression)
Calculating the Weibull Distribution Using Numerical Methods (Maximum Likelihood Method)
Estimation Procedures for Failed and Intact Components
- Kaplan-Meier method
- Johnson method
- Nelson method
Lifetime Data from Testing and Usage (Structures, Interpretation, Conversion)
Mixture Distributions
Lifetime Tests for Demonstrating Reliability
Planning Reliability Tests
- The “Success Run” method
- The “Sudden Death” method
System Reliability
Securing Lifetime Predictions (Confidence Probabilities and Confidence Intervals)
The application of the course content is carried out using the R programming language.
- Description, behavior, and interpretation of the Weibull distribution
- Description, behavior, and interpretation of its density function
- Failure rates based on the Weibull distribution
Calculating the Weibull Distribution Using Estimation Procedures (Ranking - Estimator - Regression)
Calculating the Weibull Distribution Using Numerical Methods (Maximum Likelihood Method)
Estimation Procedures for Failed and Intact Components
- Kaplan-Meier method
- Johnson method
- Nelson method
Lifetime Data from Testing and Usage (Structures, Interpretation, Conversion)
Mixture Distributions
Lifetime Tests for Demonstrating Reliability
Planning Reliability Tests
- The “Success Run” method
- The “Sudden Death” method
System Reliability
Securing Lifetime Predictions (Confidence Probabilities and Confidence Intervals)
The application of the course content is carried out using the R programming language.
Module components
Compulsory area
The following courses are mandatory for this module:
| Courses | Type | Number | Frequency | Language | Hours per week | Course catalog |
|---|---|---|---|---|---|---|
| Applied Data Science for Reliability Engineering | Integrated course | 3536 L 319 | Summer semester | [de] | 4 | ISIS |
Workload and credit points
Applied Data Science for Reliability Engineering (Integrated course)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Prüfungsvorbereitung | 1 | 40 h | 40 h |
| Rechnerübung/Projektdurchführung | 6 | 8 h | 48 h |
| Vor-/Nachbereitung | 15 | 3 h | 45 h |
| Vorlesungszeit | 5 | 8 h | 40 h |
| 173 h | |||
The workload of the module adds up to 173 hours. The module therefore comprises 6 credit points.
Description of teaching and learning methods
Lectures with integrated exercises, computer-based exercises, and project work will be employed.
Requirements for participation and examination
Desirable prerequisites for participation in the courses:
Successful completion of the following courses:
Introduction to Engineering Data Analytics (IDA)
Applied Data Science for Quality Engineering (DQE)
Introduction to Engineering Data Analytics (IDA)
Applied Data Science for Quality Engineering (DQE)
Mandatory requirements for the module examination registration:
This module has no examination requirements.
Completion of the module
| Grading | Graded |
|---|---|
| Exam format | Portfolio examination |
| Type of portfolio examination | 100 points in total |
| Language | German |
Test elements
| Name | Points/Weight | Category | Duration/Extent |
|---|---|---|---|
| Bearbeitung des Projektes | 30 | practical | 30 - 45 Minuten |
| Written exam | 70 | written | 75 Minuten |
Exam description
Die Prüfungsform für dieses Modul ist die Portfolioprüfung.
Dazu müssen die unten aufgeführten Teilleistungen mit entsprechender Gewichtung absolviert werden:
- Bearbeitung des Projektes - 30 von 100 Punkten (in der vorlesungsfreien Zeit)
- Schriftliche Prüfung - 70 von 100 Punkten (in der vorlesungsfreien Zeit)
Dazu müssen die unten aufgeführten Teilleistungen mit entsprechender Gewichtung absolviert werden:
- Bearbeitung des Projektes - 30 von 100 Punkten (in der vorlesungsfreien Zeit)
- Schriftliche Prüfung - 70 von 100 Punkten (in der vorlesungsfreien Zeit)
Duration of the module
The following number of semesters is estimated for taking and completing the module: 1 semester(s).
This module can be started in the following semesters: Summer semester.
Maximum number of participants
This module is not limited to a number of students.
Registration procedures
The examination format for this module is a portfolio exam. The following components must be completed with the respective weighting:
- Project work - 30 out of 100 points (during the semester break)
- Written exam - 70 out of 100 points (during the semester break)
- Project work - 30 out of 100 points (during the semester break)
- Written exam - 70 out of 100 points (during the semester break)
Recommended reading, lecture notes
Lecture notes
unavailable
Electronic lecture notes
available – Das Skript in elektronischer Form wird über das ISIS System der TU Berlin bereitgestellt
Recommended literature
- Bertsche, Bernd; Lechner, Gisbert (2004): Zuverlässigkeit im Fahrzeug- und Maschinenbau. 3., überarbeitete und erweiterte Auflage. Berlin, Heidelberg, New York: Springer-Verlag
- Meyna, Arno; Pauli, Bernhard (2009): Zuverlässigkeitstechnik. Quantitative Bewertungsverfahren. 2., überarbeitete und erweiterte Auflage. München: Hanser, Carl.
- Verband der Automobilindustrie e.V. (VDA) (2016): Qualitätsmanagement in der Automobilindustrie Band 3. Zuverlässigkeitssicherung bei Automobilherstellern und Lieferanten Teil 2. Zuverlässigkeits-Methoden und -Hilfsmittel, 4. Auflage
Assigned programs
This module version is used in the following programs:
| Program / program version | Semester(s) | Curriculum component |
|---|---|---|
| Aeronautics and Astronautics StuPO 2018 | SS 2025 | 1. Ingenieurwissenschaftliche Methoden › 1.1 Allgemeine und vertiefende ingenieurwissenschaftliche Methoden |
| WS 2025/26 | 1. Ingenieurwissenschaftliche Methoden › 1.1 Allgemeine und vertiefende ingenieurwissenschaftliche Methoden | |
| SS 2026 | 1. Ingenieurwissenschaftliche Methoden › 1.1 Allgemeine und vertiefende ingenieurwissenschaftliche Methoden | |
| WS 2026/27 | 1. Ingenieurwissenschaftliche Methoden › 1.1 Allgemeine und vertiefende ingenieurwissenschaftliche Methoden | |
| Biomedical Engineering StuPO 2018 | SS 2025 | 2. Wahlpflichtmodule › 2.2 Ingenieurwissenschaftliche Vertiefungen |
| WS 2025/26 | 2. Wahlpflichtmodule › 2.2 Ingenieurwissenschaftliche Vertiefungen | |
| SS 2026 | 2. Wahlpflichtmodule › 2.2 Ingenieurwissenschaftliche Vertiefungen | |
| WS 2026/27 | 2. Wahlpflichtmodule › 2.2 Ingenieurwissenschaftliche Vertiefungen | |
| Computational Engineering Science (Informationstechnik im Maschinenwesen) StuPO 2018 | SS 2025 | 6. Schwerpunkte › 6.3 Konstruktion und Fertigung › 6.3.2 Produktionstechnik |
| WS 2025/26 | 6. Schwerpunkte › 6.3 Konstruktion und Fertigung › 6.3.2 Produktionstechnik | |
| SS 2026 | 6. Schwerpunkte › 6.3 Konstruktion und Fertigung › 6.3.2 Produktionstechnik | |
| WS 2026/27 | 6. Schwerpunkte › 6.3 Konstruktion und Fertigung › 6.3.2 Produktionstechnik | |
| Computational Engineering Science (Informationstechnik im Maschinenwesen) StuPO 2018 (17.01.2018) | SS 2025 | 4. Profilbereich › 4.2 Profilbereich: Konstruktion und Fertigung › 4.2b Produktionstechnik |
| WS 2025/26 | 4. Profilbereich › 4.2 Profilbereich: Konstruktion und Fertigung › 4.2b Produktionstechnik | |
| SS 2026 | 4. Profilbereich › 4.2 Profilbereich: Konstruktion und Fertigung › 4.2b Produktionstechnik | |
| WS 2026/27 | 4. Profilbereich › 4.2 Profilbereich: Konstruktion und Fertigung › 4.2b Produktionstechnik | |
| Industrial Engineering and Management Industrial Engineering and Management (M. Sc.) - StuPO 2015 | SS 2025 | Integrationsbereich/Integration › Integrationsbereich/Integration (Wahlpflicht/Compulsory-Elective) › Quality Management |
| WS 2025/26 | Integrationsbereich/Integration › Integrationsbereich/Integration (Wahlpflicht/Compulsory-Elective) › Quality Management | |
| SS 2026 | Integrationsbereich/Integration › Integrationsbereich/Integration (Wahlpflicht/Compulsory-Elective) › Quality Management | |
| WS 2026/27 | Integrationsbereich/Integration › Integrationsbereich/Integration (Wahlpflicht/Compulsory-Elective) › Statistics & Econometrics | |
| Industrial Engineering and Management Industrial Engineering and Management (M. Sc.) - StuPO 2026 | WS 2026/27 | Integration Component › Statistics & Econometrics |
| Mechanical Engineering StuPO 2017 | SS 2025 | Wahlpflichtmodule › Schwerpunktmodule › Methodenorientierung › Informationstechnische und rechnerunterstützte Modellierung |
| WS 2025/26 | Wahlpflichtmodule › Schwerpunktmodule › Methodenorientierung › Informationstechnische und rechnerunterstützte Modellierung | |
| SS 2026 | Wahlpflichtmodule › Schwerpunktmodule › Methodenorientierung › Informationstechnische und rechnerunterstützte Modellierung | |
| WS 2026/27 | Wahlpflichtmodule › Schwerpunktmodule › Methodenorientierung › Informationstechnische und rechnerunterstützte Modellierung | |
| Production Engineering StuPO 2018 (09.05.2018) | SS 2025 | 3. Informationstechnik |
| WS 2025/26 | 4. Profilmodule › 4.2 Automatisierungs- und Informationstechnik | |
| SS 2026 | 3. Informationstechnik | |
| WS 2026/27 | 3. Informationstechnik | |
| Transport Systems StuPO 2018 | SS 2025 | A. Grundlagen › 2. Wahlpflichtbereich › 2.3.1 Informationstechnische Grundlagen |
| WS 2025/26 | A. Grundlagen › 2. Wahlpflichtbereich › 2.3.1 Informationstechnische Grundlagen | |
| SS 2026 | A. Grundlagen › 2. Wahlpflichtbereich › 2.3.1 Informationstechnische Grundlagen | |
| WS 2026/27 | A. Grundlagen › 2. Wahlpflichtbereich › 2.3.1 Informationstechnische Grundlagen |
This module imparts essential methods and procedures that enable participants to take on various tasks in reliability analysis, to manage and coordinate them, and to complete them successfully.
Miscellaneous
This module is the updated version of the “Reliability and Risk Assessment” module and will be offered starting in the summer semester of 2018.