Automation EngineeringModule description #50160 / Version 5
- 6 CP
- Portfolio examination
- Graded
- Winter and summer semester
- German
| Module / Version | #50160 / #5 |
|---|---|
| Validity | Since Winter semester 2024/25 |
| Available language(s) | German |
| Credit points | 6 |
| Person responsible for the module | Krüger, Jörg |
| Grading | Graded |
| Exam format | Portfolio examination |
| Language(s) of instruction | German |
Affiliation
| Faculty | Fakultät V |
|---|---|
| Institute | Institut für Werkzeugmaschinen und Fabrikbetrieb (IWF) |
| Academic chair | 35361400 FG Industrielle Automatisierungstechnik |
Contact
| Office | PTZ 5 |
|---|---|
| Contact person | Karbouj, Bsher |
| E-mail address | lehre@iat.tu-berlin.de |
| Website | http://www.iat.tu-berlin.de |
Learning outcomes
After successfully completing the module, students will have extensive knowledge in the field of industrial automation technology, including the following sub-areas:
- Actuators
- sensor technology
- control technology
- communication
- information technology
- safety engineering
Building on the knowledge acquired, various methodological and system skills are taught:
- Ability to select, assess and design individual automation components and processes (drives sensors control systems...)
- Integration of individual components in automated systems
- Conception and implementation of tasks in the field of control and regulation technology
- Use of standardized interfaces for information technology system integration
- Consideration of safety and communication aspects
Students acquire skills for the holistic design and implementation of automation systems.
- Actuators
- sensor technology
- control technology
- communication
- information technology
- safety engineering
Building on the knowledge acquired, various methodological and system skills are taught:
- Ability to select, assess and design individual automation components and processes (drives sensors control systems...)
- Integration of individual components in automated systems
- Conception and implementation of tasks in the field of control and regulation technology
- Use of standardized interfaces for information technology system integration
- Consideration of safety and communication aspects
Students acquire skills for the holistic design and implementation of automation systems.
Content
The module consists of the lectures Automation Technology I and Automation Technology II. In this module, advanced topics from the fields of control and regulation technology as well as sensor and communication technology in automation are taught.
AUT I:
- Number systems and Boolean algebra
- Logical links
- Programmable logic controllers (VPS)
- Programmable logic controllers (PLC)
- Drives for position adjustment
- Sensor technology
- Image processing in automation technology
AUT II:
- System theory basics
- Properties of transfer elements and structure of closed control loops
- Stability of closed control loops
- Controller design especially for production machines in practice
- Communication systems for production technology (bus systems)
- Safety of automated systems
- Process monitoring and diagnostics
- Industrial robotics
AUT I:
- Number systems and Boolean algebra
- Logical links
- Programmable logic controllers (VPS)
- Programmable logic controllers (PLC)
- Drives for position adjustment
- Sensor technology
- Image processing in automation technology
AUT II:
- System theory basics
- Properties of transfer elements and structure of closed control loops
- Stability of closed control loops
- Controller design especially for production machines in practice
- Communication systems for production technology (bus systems)
- Safety of automated systems
- Process monitoring and diagnostics
- Industrial robotics
Module components
Compulsory area
The following courses are mandatory for this module:
| Courses | Type | Number | Frequency | Language | Hours per week | Course catalog |
|---|---|---|---|---|---|---|
| Automatisierungstechnik I | Lecture | 0536 L 100 | Winter semester | [de] | 2 | WS 2026/27 (1) ISIS |
| Automatisierungstechnik II | Lecture | 0536 L 101 | Summer semester | [de] | 2 | ISIS |
Courses in the course catalog
Courses created from the teaching units of this module.
Winter semester 2026/27 (1)
Automatisierungstechnik I (Lecture) 1
- Automatisierungstechnik I (Vorlesung) Termingruppe 1 0536 L 100
Workload and credit points
Automatisierungstechnik I (Lecture)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Attendance | 15 | 2 h | 30 h |
| Pre/post processing | 15 | 4 h | 60 h |
| 90 h | |||
Automatisierungstechnik II (Lecture)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Attendance | 15 | 2 h | 30 h |
| Pre/post processing | 15 | 4 h | 60 h |
| 90 h | |||
The workload of the module adds up to 180 hours. The module therefore comprises 6 credit points.
Description of teaching and learning methods
Various forms of presentation are used, e.g. PPT presentation, pre-calculation/instructions on blackboard/overhead projector, Matlab demonstrations, etc. The practical relevance is established through appropriate calculation examples and the use of common tools such as Matlab/Simulink and Scilab/Xcos. In addition, selected topics are developed and presented by students.
Requirements for participation and examination
Desirable prerequisites for participation in the courses:
Desirable prerequisites for participation in the courses:
a) Required: BSc in engineering subject
b) Desirable: LV Fundamentals of Automation Technology
Mandatory prerequisites for module examination registration:
This module has no examination requirements.
a) Required: BSc in engineering subject
b) Desirable: LV Fundamentals of Automation Technology
Mandatory prerequisites for module examination registration:
This module has no examination requirements.
Mandatory requirements for the module examination registration:
This module has no examination requirements.
Completion of the module
| Grading | Graded |
|---|---|
| Exam format | Portfolio examination |
| Type of portfolio examination | 100 points in total |
| Language | German |
Test elements
| Name | Points/Weight | Category | Duration/Extent |
|---|---|---|---|
| Automatisierungstechnik I | 50 | written | 60 |
| Automatisierungstechnik II | 50 | written | 60 |
Duration of the module
The following number of semesters is estimated for taking and completing the module: 2 semester(s).
This module can be started in the following semesters: Winter and summer semester.
Maximum number of participants
This module is not limited to a number of students.
Registration procedures
Current information can be found each semester in ISIS.
Registration takes place via the Moses MTS system.
Registration takes place via the Moses MTS system.
Recommended reading, lecture notes
Lecture notes
unavailable
Electronic lecture notes
available – https://www.isis.tu-berlin.de
Recommended literature
- Busch, Nikolay , Adam; Sensoren für die Produktionstechnik King, Systemtechnische Grunglagen der Mess- und Regelungstechnik
- H.-J. Gevatter, U. Grünhaupt; Handbuch der Mess- und Automatisierungstechnik in der Produktion, Springer Lehrbuch
- M. Weck, Werkzeugmaschinen - Fertigungssysteme, Teil 4 Automatisierung von Maschinen und Anlagen, Springer Lehrbuch
Assigned programs
This module version is used in the following programs:
| Program / program version | Semester(s) | Curriculum component |
|---|---|---|
| Aeronautics and Astronautics StuPO 2018 | WS 2025/26 | 1. Ingenieurwissenschaftliche Methoden › 1.4 Regelungstechnik, Elektronik und Software-Engineering |
| SS 2026 | 1. Ingenieurwissenschaftliche Methoden › 1.4 Regelungstechnik, Elektronik und Software-Engineering | |
| WS 2026/27 | 1. Ingenieurwissenschaftliche Methoden › 1.4 Regelungstechnik, Elektronik und Software-Engineering | |
| Biomedical Engineering StuPO 2018 | WS 2025/26 | 2. Wahlpflichtmodule › 2.2 Ingenieurwissenschaftliche Vertiefungen |
| SS 2026 | 2. Wahlpflichtmodule › 2.2 Ingenieurwissenschaftliche Vertiefungen | |
| WS 2026/27 | 2. Wahlpflichtmodule › 2.2 Ingenieurwissenschaftliche Vertiefungen | |
| Computational Engineering Science (Informationstechnik im Maschinenwesen) StuPO 2018 (17.01.2018) | SS 2025 | 3. Kernbereich: Messen, Steuern, Regeln |
| WS 2025/26 | 3. Kernbereich: Messen, Steuern, Regeln | |
| SS 2026 | 3. Kernbereich: Messen, Steuern, Regeln | |
| WS 2026/27 | 3. Kernbereich: Messen, Steuern, Regeln | |
| Engineering Science StuPO 2007 (19.12.2007) | WS 2025/26 | 2.3 Mechatronik › 2.3b Ergänzungsbereich |
| SS 2026 | 2.3 Mechatronik › 2.3b Ergänzungsbereich | |
| Engineering Science StuPO 2020 | WS 2025/26 | 2.3 Mechatronik › 2.3b Ergänzungsbereich |
| SS 2026 | 2.3 Mechatronik › 2.3b Ergänzungsbereich | |
| WS 2026/27 | 2.3 Mechatronik › 2.3b Ergänzungsbereich | |
| Industrial Engineering and Management Industrial Engineering and Management (M. Sc.) - StuPO 2015 | SS 2025 | Ingenieurwissenschaftliche Studienrichtungen/Engineering Majors › Elektrotechnik/Electrical Engineering (ET) › Elektrotechnik/Electrical Engineering (Wahlpflicht/Compulsory-Elective) › Automation & Control |
| WS 2025/26 | Ingenieurwissenschaftliche Studienrichtungen/Engineering Majors › Elektrotechnik/Electrical Engineering (ET) › Elektrotechnik/Electrical Engineering (Wahlpflicht/Compulsory-Elective) › Automation & Control | |
| SS 2026 | Ingenieurwissenschaftliche Studienrichtungen/Engineering Majors › Elektrotechnik/Electrical Engineering (ET) › Elektrotechnik/Electrical Engineering (Wahlpflicht/Compulsory-Elective) › Automation & Control | |
| WS 2026/27 | Ingenieurwissenschaftliche Studienrichtungen/Engineering Majors › Elektrotechnik/Electrical Engineering (ET) › Elektrotechnik/Electrical Engineering (Wahlpflicht/Compulsory-Elective) › Automation & Control | |
| Industrial Engineering and Management Industrial Engineering and Management (M. Sc.) - StuPO 2026 | WS 2026/27 | Engineering Sciences / Specialization › Electrical Engineering › Automation & Control |
| Mechanical Engineering StuPO 2017 | WS 2025/26 | Wahlpflichtmodule › Kernmodule › Werkzeugmaschinen und Anlagentechnik |
| SS 2026 | Wahlpflichtmodule › Kernmodule › Werkzeugmaschinen und Anlagentechnik | |
| WS 2026/27 | Wahlpflichtmodule › Kernmodule › Werkzeugmaschinen und Anlagentechnik | |
| Patent Engineering StuPO 2015 | WS 2025/26 | 2.1. Ingenieurwissenschaftliche Kernmodule › 2.1.7. Werkzeugmaschinen und Anlagentechnik |
| SS 2026 | 2.1. Ingenieurwissenschaftliche Kernmodule › 2.1.7. Werkzeugmaschinen und Anlagentechnik | |
| WS 2026/27 | 2.1. Ingenieurwissenschaftliche Kernmodule › 2.1.7. Werkzeugmaschinen und Anlagentechnik | |
| Production Engineering StuPO 2018 (09.05.2018) | WS 2025/26 | 1. Kernmodule › 1.Kernmodule |
| SS 2026 | 1. Kernmodule › 1.Kernmodule | |
| WS 2026/27 | 1. Kernmodule › 1.Kernmodule | |
| Technomathematics Technomathematics (M. Sc.) - StuPO 2014 | SS 2025 | Studienrichtungen › Physikalische Ingenieurwissenschaft › Physikalische Ingenieurwissenschaft › Mechatronik |
| WS 2025/26 | Studienrichtungen › Physikalische Ingenieurwissenschaft › Physikalische Ingenieurwissenschaft › Mechatronik | |
| SS 2026 | Studienrichtungen › Maschinenbau › Maschinenbau › Kernmodule | |
| WS 2026/27 | Studienrichtungen › Physikalische Ingenieurwissenschaft › Physikalische Ingenieurwissenschaft › Mechatronik |
Miscellaneous
More information can be found at http://www.iat.tu-berlin.de and in the corresponding ISIS course.