Skip to content
Technische Universität Berlin Deutsch
Course catalog and module transfer system

Machine Tools IIModule description #50172 / Version 6

← Module page Deutsche Fassung
Module / Version#50172 / #6
ValiditySince Summer semester 2026
Available language(s)German
Credit points6
Person responsible for the modulePolte, Mitchel
GradingGraded
Exam formatPortfolio examination
Language(s) of instructionGerman

Affiliation

FacultyFakultät V
InstituteInstitut für Werkzeugmaschinen und Fabrikbetrieb (IWF)
Academic chair35361100 FG Werkzeugmaschinen und Fertigungstechnik

Contact

OfficePTZ 1
Contact personBold, Jörg
E-mail addressbold@iwf.tu-berlin.de
WebsiteNot specified

Learning outcomes

By taking an in-depth look at “machine tools” for processing technical products, students should be able to analyze and evaluate holistic relationships between mechanical engineering principles and the production process. The development also includes optimization, for which knowledge of the corresponding fault complexes is necessary.

Content

Analysis and evaluation of the fault complexes: - Static, dynamic and thermal behavior - Noise behavior - Wear

Module components

Compulsory area

The following courses are mandatory for this module:

CoursesTypeNumberFrequencyLanguageHours per weekCourse catalog
Bearbeitungssystem Werkzeugmaschine IILecture0536 L 071 Summer semester[de]2 ISIS

Wahlpflichtbereich

A selection of the following courses must be completed:

CoursesTypeNumberFrequencyLanguageHours per weekCourse catalog
Bearbeitungssystem Werkzeugmaschine ILecture213 Winter semester[de]2 ISIS
CNC PraktikumExercise Winter and summer semester[de]2 ISIS
FertigungstechnikLecture0536 L 050 Winter and summer semester[de]2 ISIS
Produktionstechnisches PraktikumExercise Winter and summer semester[de]2 ISIS
Übungen im Versuchsfeld für FertigungstechnikExercise Winter and summer semester[de]2 ISIS
Übungen im Versuchsfeld für WerkzeugmaschinenExercise Winter and summer semester[de]2 ISIS

Courses in the course catalog

Courses created from the teaching units of this module.

Winter semester 2026/27 (4)

Bearbeitungssystem Werkzeugmaschine I (Lecture) 1

All groups of this course in the catalog

Fertigungstechnik (Lecture) 1

All groups of this course in the catalog

Übungen im Versuchsfeld für Fertigungstechnik (Exercise) 2

All groups of this course in the catalog

Workload and credit points

Bearbeitungssystem Werkzeugmaschine II (Lecture)

Workload descriptionMultiplierHoursTotal
Time of attendance152 h30 h
Preparation/follow-up154 h60 h
90 h

Bearbeitungssystem Werkzeugmaschine I (Lecture)

Workload descriptionMultiplierHoursTotal
Time of attendance152 h30 h
Preparation/follow-up154 h60 h
90 h

CNC Praktikum (Exercise)

Workload descriptionMultiplierHoursTotal
Time of attendance152 h30 h
Preparation/follow-up154 h60 h
90 h

Fertigungstechnik (Lecture)

Workload descriptionMultiplierHoursTotal
Time of attendance152 h30 h
Preparation/follow-up154 h60 h
90 h

Produktionstechnisches Praktikum (Exercise)

Workload descriptionMultiplierHoursTotal
Time of attendance152 h30 h
Preparation/follow-up154 h60 h
90 h

Übungen im Versuchsfeld für Fertigungstechnik (Exercise)

Workload descriptionMultiplierHoursTotal
Time of attendance152 h30 h
Preparation/follow-up154 h60 h
90 h

Übungen im Versuchsfeld für Werkzeugmaschinen (Exercise)

Workload descriptionMultiplierHoursTotal
Time of attendance152 h30 h
Preparation/follow-up154 h60 h
90 h

The workload of the module adds up to 630 hours. The module therefore comprises 6 credit points.

Description of teaching and learning methods

The basic course is a lecture with 2 SWS, which takes place in the summer semester. Depending on the students' prerequisites, this course must be supplemented with 2 SWS from the named compulsory elective courses.

Requirements for participation and examination

Desirable prerequisites for participation in the courses:

Mandatory: none Desired: basic knowledge of production technology and the structure of machine tools.

Mandatory requirements for the module examination registration:

This module has no examination requirements.

Completion of the module

GradingGraded
Exam formatPortfolio examination
Type of portfolio examination100 points in total
LanguageGerman

Test elements

NamePoints/WeightCategoryDuration/Extent
Lecture exam50written60
Examination in the compulsory elective module50flexibel60

Exam description

The performance assessments of the lectures take place in writing at the end of the semester. The performance assessments of the practical courses take place during the semester in the form of tests or the grading of presentations. The individual parts of the module each make up 50% of the module grade.
The module is graded according to the following grading scale:

95.0 to 100.0 points ... 1,0
90.0 to 94.9 points ..... 1.3
85.0 to 89.9 points ..... 1.7
80.0 to 84.9 points ..... 2.0
75.0 to 79.9 points ..... 2.3
70.0 to 74.9 points ..... 2.7
65.0 to 69.9 points ..... 3.0
60.0 to 64.9 points ..... 3.3
55.0 to 59.9 points ..... 3.7
50.0 to 54.9 points ..... 4.0
0.0 to 49.9 points ....... 5.0

Duration of the module

The following number of semesters is estimated for taking and completing the module: 1 semester(s).

This module can be started in the following semesters: Winter and summer semester.

Maximum number of participants

The maximum capacity of participants is 50.

Registration procedures

Module registration is done via ISIS.

Recommended reading, lecture notes

Lecture notes

available

Electronic lecture notes

unavailable

Recommended literature

  • Hinweise in den Veranstaltungen

Assigned programs

This module version is used in the following programs:

Program / program versionSemester(s)Curriculum component
Computational Engineering Science (Informationstechnik im Maschinenwesen)
StuPO 2018 (17.01.2018)
SS 20264. Profilbereich › 4.2 Profilbereich: Konstruktion und Fertigung › 4.2b Produktionstechnik
WS 2026/274. Profilbereich › 4.2 Profilbereich: Konstruktion und Fertigung › 4.2b Produktionstechnik
Industrial Engineering and Management
Industrial Engineering and Management (M. Sc.) - StuPO 2015
WS 2026/27Ingenieurwissenschaftliche Studienrichtungen/Engineering Majors › Maschinenbau/Mechanical Engineering (MB) › Maschinenbau/Mechanical Engineering (Wahlpflicht/Compulsory-Elective) › Production Technology and Factory Management
Industrial Engineering and Management
Industrial Engineering and Management (M. Sc.) - StuPO 2026
WS 2026/27Engineering Sciences / Specialization › Mechanical Engineering › Mechanical Engineering (Compulsory Electives) › Production Technology and Factory Management
Mechanical Engineering
StuPO 2017
SS 2026Wahlpflichtmodule › Kernmodule › Werkzeugmaschinen und Anlagentechnik
WS 2026/27Wahlpflichtmodule › Kernmodule › Werkzeugmaschinen und Anlagentechnik
Metals Engineering (teacher training)
Metals Engineering (teacher training) (M. Ed.) - StuPO 2015
SS 2026Fachwissenschaftlicher Vertiefungsbereich
WS 2026/27Fachwissenschaftlicher Vertiefungsbereich
Patent Engineering
StuPO 2015
SS 20262.1. Ingenieurwissenschaftliche Kernmodule › 2.1.7. Werkzeugmaschinen und Anlagentechnik
WS 2026/272.1. Ingenieurwissenschaftliche Kernmodule › 2.1.7. Werkzeugmaschinen und Anlagentechnik
Production Engineering
StuPO 2018 (09.05.2018)
SS 20261. Kernmodule › 1.Kernmodule
WS 2026/271. Kernmodule › 1.Kernmodule
Technomathematics
Technomathematics (M. Sc.) - StuPO 2014
SS 2026Studienrichtungen › Maschinenbau › Maschinenbau › Kernmodule
WS 2026/27Studienrichtungen › Maschinenbau › Maschinenbau › Kernmodule
The module is a core module for students on the Master's degree programme in Mechanical Engineering/Production Engineering - Specialisation in Production Technology. The module is open to all other students.

Miscellaneous

Not specified