Skip to content
Technische Universität Berlin Deutsch
Course catalog and module transfer system

Applied Computer Vision in Automation IModule description #50190 / Version 11

← Module page Deutsche Fassung
Module / Version#50190 / #11
ValiditySince Winter semester 2026/27
Available language(s)German
Credit points6
Person responsible for the moduleKrüger, Jörg
GradingGraded
Exam formatPortfolio examination
Language(s) of instructionGerman

Affiliation

FacultyFakultät V
InstituteInstitut für Werkzeugmaschinen und Fabrikbetrieb (IWF)
Academic chair35361400 FG Industrielle Automatisierungstechnik

Contact

OfficePTZ 5
Contact personHartisch, Richard Matthias
E-mail addresslehre@iat.tu-berlin.de
Websitehttp://www.iat.tu-berlin.de

Learning outcomes

Graduates of the module have:

- knowledge of typical requirements and practical solutions in computer vision for automation, particularly for control, regulation, and quality control tasks in production engineering
- skills in handling optics, cameras, illumination systems, computers, and industrial software tools for computer vision systems
- competencies in:
* selecting and integrating components of industrial computer vision systems
* optics, particularly imaging laws, the color spectrum, and sensor principles
* operating several industrial software solutions for computer vision applications
* selecting and calculating application-specific relevant features from visual sensor data
* applying fundamental methods for the preparation, evaluation, and interpretation of visual data
* applying engineering methods for the planning, execution, and documentation of experimental investigations in the field of computer vision in automation

Content

The lecture “Applied Computer Vision in Automation I” introduces the broad range of applications of computer vision for the automation of industrial processes through various practical examples, such as optical defect inspection of glass tubes, optical measurement of wheelsets, character recognition, and object recognition. The lecture covers the fundamentals of visual data acquisition and analysis, including visual perception, color spaces, image acquisition (optics, illumination, imaging sensors, and calibration), methods for preparing visual data (edge filtering and noise reduction), as well as the fundamentals of feature extraction and pattern recognition.

The exercise “Applied Computer Vision in Automation I” focuses primarily on practical problems of industrial computer vision in automation. For example, web defects in textiles are detected using a line-scan camera setup, the positioning of chips on a circuit board is inspected using an industrial matrix camera, and signals are transmitted to a PLC using an intelligent camera. In addition, the selection and calibration of lenses and illumination are carried out, and different methods for noise reduction, feature extraction, and pattern recognition are applied in an application-oriented manner. Furthermore, graphical development environments of professional software solutions for industrial computer vision applications are introduced and used.

Module components

Compulsory area

The following courses are mandatory for this module:

CoursesTypeNumberFrequencyLanguageHours per weekCourse catalog
Angewandtes Maschinelles Sehen in der Automatisierung ILecture0536 L 108 Winter semester[de]2 ISIS
Bildgestützte Automatisierung IExercise0536 L 109 Winter semester[de]2 ISIS

Courses in the course catalog

Courses created from the teaching units of this module.

Winter semester 2026/27 (2)

Angewandtes Maschinelles Sehen in der Automatisierung I (Lecture) 1

All groups of this course in the catalog

Bildgestützte Automatisierung I (Exercise) 1

All groups of this course in the catalog

Workload and credit points

Angewandtes Maschinelles Sehen in der Automatisierung I (Lecture)

Workload descriptionMultiplierHoursTotal
Präsenzzeit152 h30 h
Vor-/Nachbereitung154 h60 h
90 h

Bildgestützte Automatisierung I (Exercise)

Workload descriptionMultiplierHoursTotal
Präsenzzeit152 h30 h
Vor-/Nachbereitung154 h60 h
90 h

The workload of the module adds up to 180 hours. The module therefore comprises 6 credit points.

Description of teaching and learning methods

Various didactic methods are applied in the lecture to provide interactive and closely supervised support for teaching and learning, including inverted classroom, mind maps, and metaplan methods.

Experimental and analytical group exercises teach the practical use of experimental setups representing the current state of the art in industrial systems. The intensively supervised exercises include elements of Team-Based Learning (TBL) as well as joint discussions of results, approaches, and solution strategies within the groups, thereby supporting the targeted academic development of the students.

Requirements for participation and examination

Desirable prerequisites for participation in the courses:

This module has no desirable prerequisites for the courses.

Mandatory requirements for the module examination registration:

This module has no examination requirements.

Completion of the module

GradingGraded
Exam formatPortfolio examination
Type of portfolio examination100 points in total
LanguageGerman

Test elements

NamePoints/WeightCategoryDuration/Extent
Testat zu Übungsinhalten50written45 Minuten
Testat zu Vorlesungsinhalten50written60 Minuten

Exam description

Prüfungsform ist Portfolioprüfung. Die Gesamtbenotung ergibt sich aus den o.g. Prüfungselementen. Die Elemente müssen nicht einzeln bestanden werden, lediglich die Summe aller Leistungen wird nach dem nachfolgenden Notenschlüssel bewertet.

Zu erreichende Gesamtpunktezahl: 100

Notenschlüssel in Prozent:
ab 95% ..... 1,0
ab 90% ..... 1,3
ab 85% ..... 1,7
ab 80% ..... 2,0
ab 75% ..... 2,3
ab 70% ..... 2,7
ab 65% ..... 3,0
ab 60% ..... 3,3
ab 55% ..... 3,7
ab 50% ..... 4,0
bis 50% .... 5,0

Duration of the module

The following number of semesters is estimated for taking and completing the module: 1 semester(s).

This module can be started in the following semesters: Winter semester.

Maximum number of participants

This module is not limited to a number of students.

Registration procedures

Students are required to enroll in the corresponding ISIS course and attend the first lecture and the first exercise session for organizational purposes. In addition, students must register for the examination on MOSES within the specified deadline. The ISIS course will be activated from October 1st onward.

Recommended reading, lecture notes

Lecture notes

unavailable

Electronic lecture notes

available – https://www.isis.tu-berlin.de/

Recommended literature

  • B. Jähne, Digitale Bildverarbeitung
  • C. Demant, Industrielle Bildverarbeitung
  • C.-E.Liedtke, M. Ender; Wissensbasierte Bildverarbeitung
  • H. Bässmann, J. Kreyss; Bildverarbeitung Ad Oculos (für den Optik Teil)
  • W. Burger, M. J. Burge; Digitale Bildverarbeitung: Eine Einführung mit Java und ImageJ

Assigned programs

This module version is used in the following programs:

Program / program versionSemester(s)Curriculum component
Biomedical Engineering
StuPO 2018
WS 2026/272. Wahlpflichtmodule › 2.1 Medizintechnische Profile › 2.1.3 Bildgebende Systeme in der Medizin
Computational Engineering Science (Informationstechnik im Maschinenwesen)
StuPO 2018 (17.01.2018)
WS 2026/274. Profilbereich › 4.2 Profilbereich: Konstruktion und Fertigung › 4.2b Produktionstechnik
Engineering Science
StuPO 2020
WS 2026/272.3 Mechatronik › 2.3b Ergänzungsbereich
Industrial Engineering and Management
Industrial Engineering and Management (M. Sc.) - StuPO 2015
WS 2026/27Ingenieurwissenschaftliche Studienrichtungen/Engineering Majors › Maschinenbau/Mechanical Engineering (MB) › Maschinenbau/Mechanical Engineering (Wahlpflicht/Compulsory-Elective) › Automation and Industrial Information Technology
Industrial Engineering and Management
Industrial Engineering and Management (M. Sc.) - StuPO 2026
WS 2026/27Engineering Sciences / Specialization › Mechanical Engineering › Mechanical Engineering (Compulsory Electives) › Cyber-Physical-Production-Systems
Mechanical Engineering
StuPO 2017
WS 2026/27Wahlpflichtmodule › Profilmodule › Mess- und Automatisierungstechnik
Patent Engineering
StuPO 2015
WS 2026/272.2. Ingenieurwissenschaftliche Profilmodule › 2.2.5. Mess- und Automatisierungstechnik
Production Engineering
StuPO 2018 (09.05.2018)
WS 2026/274. Profilmodule › 4.2 Automatisierungs- und Informationstechnik
Technomathematics
Technomathematics (M. Sc.) - StuPO 2014
WS 2026/27Studienrichtungen › Physikalische Ingenieurwissenschaft › Physikalische Ingenieurwissenschaft › Mechatronik
This module is suitable, among others, for the following master's degree programs:
- Production Engineering
- Information Technology in Mechanical Engineering
- Engineering Science
- Electrical Engineering
- Computer Engineering

Miscellaneous

Further information available at http://www.iat.tu-berlin.de