Introduction to rail vehicle technologyModule description #50224 / Version 7
- 6 CP
- Portfolio examination
- Graded
- Summer semester
- German
This module description is not valid in the current semester (Winter semester 2026/27).
Current version (v8)
| Module / Version | #50224 / #7 |
|---|---|
| Validity | Summer semester 2025 – Winter semester 2025/26 |
| Available language(s) | German |
| Credit points | 6 |
| Person responsible for the module | Hecht, Markus |
| Grading | Graded |
| Exam format | Portfolio examination |
| Language(s) of instruction | German |
Affiliation
| Faculty | Fakultät V |
|---|---|
| Institute | Institut für Land- und Seeverkehr |
| Academic chair | 35331800 FG Schienenfahrzeuge |
Contact
| Office | SG 14 |
|---|---|
| Contact person | Kaffler, Aaron |
| E-mail address | aaron.kaffler@tu-berlin.de |
| Website | https://www.tu.berlin/schienenfzg/studium-lehre/lehre |
Learning outcomes
The module gives students an insight into the structure and function of rail vehicles. They acquire basic knowledge of the framework conditions for the use of vehicles in the railroad system. Understanding the systematic context of the overall system is an essential requirement for students.
Content
The Introduction to rail vehicle technology module deals with the various types of vehicles for different operating conditions in rail transport.
The boundary conditions and vehicles for high-speed, local and rail freight transport are considered.
The following topics are dealt with in more detail:
- Train concepts and interior design in high-speed transportation
- Vehicle design, determination of the required drive power
- Drive and chassis concepts, options for improving energy efficiency
- Braking systems of rail vehicles
- Streetcar systems, conventional and low-floor vehicles
- Drive systems of low-floor trams
- Noise reduction using the example of streetcars
- Vehicles and technical boundary conditions in rail freight transport
- Safety and reliability engineering in the design of rail vehicles
The boundary conditions and vehicles for high-speed, local and rail freight transport are considered.
The following topics are dealt with in more detail:
- Train concepts and interior design in high-speed transportation
- Vehicle design, determination of the required drive power
- Drive and chassis concepts, options for improving energy efficiency
- Braking systems of rail vehicles
- Streetcar systems, conventional and low-floor vehicles
- Drive systems of low-floor trams
- Noise reduction using the example of streetcars
- Vehicles and technical boundary conditions in rail freight transport
- Safety and reliability engineering in the design of rail vehicles
Module components
Compulsory area
The following courses are mandatory for this module:
Workload and credit points
Einführung in die Schienenfahrzeugtechnik (Lecture)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Präsenzzeit | 15 | 2 h | 30 h |
| Vor-/Nachbereitung | 15 | 4 h | 60 h |
| 90 h | |||
Einführung in die Schienenfahrzeugtechnik (Exercise)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Präsenzzeit | 15 | 2 h | 30 h |
| Vor-/Nachbereitung | 15 | 4 h | 60 h |
| 90 h | |||
The workload of the module adds up to 180 hours. The module therefore comprises 6 credit points.
Description of teaching and learning methods
Die Lehrinhalte der Vorlesungen werden durch Exkursionen ergänzt. Gastdozenten aus der Industrie zu einzelnen Spezialthemen verstärken den Praxisbezug. In den Übungen werden Projektaufgaben bearbeitet.
Requirements for participation and examination
Desirable prerequisites for participation in the courses:
Grundlagen der Mathematik, technischen Mechanik und Konstruktionslehre
Mandatory requirements for the module examination registration:
This module has no examination requirements.
Completion of the module
| Grading | Graded |
|---|---|
| Exam format | Portfolio examination |
| Type of portfolio examination | 100 points in total |
| Language | German |
Test elements
| Name | Points/Weight | Category | Duration/Extent |
|---|---|---|---|
| Hausaufgaben | 30 | written | 3 HA im Semester |
| Written exam | 70 | written | 75 Minuten |
Duration of the module
The following number of semesters is estimated for taking and completing the module: 1 semester(s).
This module can be started in the following semesters: Summer semester.
Maximum number of participants
This module is not limited to a number of students.
Registration procedures
Die Prüfungsanmeldung ist in den ersten sechs Wochen nach Beginn der Vorlesungszeit über QISPOS bzw. schriftlich im Referat Prüfungen (bei Belegung als freies Wahlfach) oder Moses erforderlich.
Recommended reading, lecture notes
Lecture notes
unavailable
Electronic lecture notes
available
Recommended literature
No recommended literature given
Assigned programs
This module version is used in the following programs:
| Program / program version | Semester(s) | Curriculum component |
|---|---|---|
| Automotive Engineering (teacher training) Automotive Engineering (teacher training) (B. Sc.) - Kernfach StuPO 2020 | SS 2025 | Pflichtbereich › Fachwissenschaft |
| WS 2025/26 | Pflichtbereich › Fachwissenschaft | |
| Automotive Engineering (teacher training) Automotive Engineering (teacher training) (B. Sc.) - Zweitfach StuPO 2020 | SS 2025 | Pflichtbereich › Fachwissenschaft |
| WS 2025/26 | Pflichtbereich › Fachwissenschaft | |
| Computational Engineering Science (Informationstechnik im Maschinenwesen) StuPO 2018 | SS 2025 | 6. Schwerpunkte › 6.3 Konstruktion und Fertigung › 6.3.3 Produktorientierte Fächer |
| WS 2025/26 | 6. Schwerpunkte › 6.3 Konstruktion und Fertigung › 6.3.3 Produktorientierte Fächer | |
| Computational Engineering Science (Informationstechnik im Maschinenwesen) StuPO 2018 (17.01.2018) | SS 2025 | 4. Profilbereich › 4.2 Profilbereich: Konstruktion und Fertigung › 4.2c Produktorientierte Fächer |
| WS 2025/26 | 4. Profilbereich › 4.2 Profilbereich: Konstruktion und Fertigung › 4.2c Produktorientierte Fächer | |
| Industrial Engineering and Management Industrial Engineering and Management (B. Sc.) - StuPO 2015 | SS 2025 | Ingenieurwissenschaftliche Studienrichtungen › Maschinenbau (MB) › Maschinenbau (Wahlpflicht) |
| WS 2025/26 | Ingenieurwissenschaftliche Studienrichtungen › Verkehrswesen (VW) › Verkehrswesen (Wahlpflicht) | |
| Mechanical Engineering StuPO 2017 | SS 2025 | Wahlpflichtmodule › Schwerpunktmodule › Produktorientierung › Fahrzeug-, Luft- und Raumfahrttechnik |
| WS 2025/26 | Wahlpflichtmodule › Schwerpunktmodule › Produktorientierung › Fahrzeug-, Luft- und Raumfahrttechnik | |
| Mechanical Engineering StuPO 2017 | SS 2025 | Wahlpflichtmodule › Profilmodule › Produkte |
| WS 2025/26 | Wahlpflichtmodule › Profilmodule › Produkte | |
| Patent Engineering StuPO 2015 | SS 2025 | 2.2. Ingenieurwissenschaftliche Profilmodule › 2.2.3. Produkte |
| WS 2025/26 | 2.2. Ingenieurwissenschaftliche Profilmodule › 2.2.3. Produkte | |
| Sociology and Technology Studies StuPO 2014 (7. Mai 2014) | SS 2025 | Technisches Fach › Verkehrswesen und -planung › Vertiefungsbereich 1: Landverkehr |
| WS 2025/26 | Technisches Fach › Verkehrswesen und -planung › Vertiefungsbereich 1: Landverkehr | |
| Technomathematics Technomathematics (M. Sc.) - StuPO 2014 | SS 2025 | Studienrichtungen › Maschinenbau › Maschinenbau › Profilmodule |
| WS 2025/26 | Studienrichtungen › Maschinenbau › Maschinenbau › Profilmodule | |
| Technomathematics Technomathematics (B. Sc.) - StuPO 2014 | SS 2025 | Studienrichtungen › Technisches Gebiet - Maschinenbau › Schwerpunkt › Fahrzeugtechnik |
| WS 2025/26 | Studienrichtungen › Technisches Gebiet - Maschinenbau › Schwerpunkt › Fahrzeugtechnik | |
| Transport Systems StuPO 2018 | SS 2025 | B. Studienrichtungen › Planung und Betrieb › 3. Grundlagen der Studienrichtung |
| WS 2025/26 | B. Studienrichtungen › Planung und Betrieb › 3. Grundlagen der Studienrichtung |
Dieses Modul bildet das Einstiegsfach für die Schienenfahrzeugtechnik und eine fahrzeugspezifische Vertiefung für den Studiengang Planung und Betrieb.
Miscellaneous
Not specified