Skip to content
Technische Universität Berlin Deutsch
Course catalog and module transfer system

Factory Management and Virtual Product DevelopmentModule description #50261 / Version 10

← Module page Deutsche Fassung
Module / Version#50261 / #10
ValiditySince Winter semester 2026/27
Available language(s)English, German
Credit points6
Person responsible for the moduleKohl, Holger
GradingGraded
Exam formatPortfolio examination
Language(s) of instructionGerman

Affiliation

FacultyFakultät V
InstituteInstitut für Werkzeugmaschinen und Fabrikbetrieb (IWF)
Academic chair35361200 FG Handhabungs- und Montagetechnik

Contact

OfficePTZ 2
Contact personGlodde, Arne
E-mail addressarne.glodde@tu-berlin.de
Websitehttps://www.tu.berlin/nu/studium-lehre/module/fabrikbetrieb-und-virtuelle-produktentwicklung-msc

Learning outcomes

Students are capable of applying the mathematical and information technology tools of modeling and the acquired technical knowledge in a case-based manner. They are able to independently solve practical tasks related to factory operations and product development through a systematic approach.

Content

Value creation networks, labor and qualification, developments in production engineering, material flow and layout planning, mathematical tools in production engineering, production planning and control, production program planning, optimization of production processes, strategies for increasing reliability, adaptability of factory elements, complexity management, life cycle engineering, procedures and methods in product development, supporting information technology systems for product development, modeling methods, virtual prototypes, and digital factory systems.

Module components

Compulsory area

The following courses are mandatory for this module:

CoursesTypeNumberFrequencyLanguageHours per weekCourse catalog
FabrikbetriebLecture3536 L 202 Summer semester[de]2 ISIS
Technologien der virtuellen Produktentstehung ILecture0536 L 400 Winter semester[de]2 ISIS

Compulsory elective area

A selection of the following courses must be completed:

CoursesTypeNumberFrequencyLanguageHours per weekCourse catalog
Projektorientierte Übung zum Fabrikbetrieb MSc / 2 LPProject3536 L 205 Winter and summer semester[de]2 ISIS
Technologien der virtuellen Produktentstehung IExercise0536 L 402 Winter semester[de]2 ISIS

Courses in the course catalog

Courses created from the teaching units of this module.

Winter semester 2026/27 (2)

Technologien der virtuellen Produktentstehung I (Lecture) 1

All groups of this course in the catalog

Technologien der virtuellen Produktentstehung I (Exercise) 1

All groups of this course in the catalog

Workload and credit points

Fabrikbetrieb (Lecture)

Workload descriptionMultiplierHoursTotal
Attendance152 h30 h
Pre/post processing152 h30 h
60 h

Technologien der virtuellen Produktentstehung I (Lecture)

Workload descriptionMultiplierHoursTotal
Attendance152 h30 h
Pre/post processing152 h30 h
60 h

Projektorientierte Übung zum Fabrikbetrieb MSc / 2 LP (Project)

Workload descriptionMultiplierHoursTotal
Attendance152 h30 h
Pre/post processing152 h30 h
60 h

Technologien der virtuellen Produktentstehung I (Exercise)

Workload descriptionMultiplierHoursTotal
Attendance152 h30 h
Pre/post processing152 h30 h
60 h

The workload of the module adds up to 240 hours. The module therefore comprises 6 credit points.

Description of teaching and learning methods

The teaching formats of the module consist of a lecture (VL) as a compulsory component and an exercise course (UE) as an elective compulsory component. The required workload of 6 ECTS credits for successful completion of the module must be achieved through the lecture Factory Management and Technologies of Virtual Product Development with a total of 4 ECTS credits and one exercise course worth 2 ECTS credits.

Students who have already completed the examination Technologies of Virtual Product Development I (VL) as part of another module will instead take the examination Technologies of Virtual Product Development II. Students who have already completed the exercise Technologies of Virtual Product Development I as part of another module will instead participate in the exercise Methods of Factory Operations MSc / 2 ECTS.

Research-oriented, situational, and problem-based teaching and learning methods are applied in the transfer of knowledge and skills. Both technical and methodological content are taught, discussed, and applied using case studies.

The initial selection and registration for an exercise course (UE) from the elective area is binding for the assessment. Changing to a different elective course after registration for the first elective compulsory course is not permitted.

Requirements for participation and examination

Desirable prerequisites for participation in the courses:

a) Required: Completed bachelor’s degree or completed undergraduate studies; very good German language skills are essential for the exercises. Alternatively, English-language projects may be selected within the exercise Methoden des Fabrikbetriebs MSc / 2 LP, for which very good English language skills are essential.

b) Desirable: Assembly technology, factory operations, and industrial information technology.

Mandatory requirements for the module examination registration:

This module has no examination requirements.

Completion of the module

GradingGraded
Exam formatPortfolio examination
Type of portfolio examination100 points per element
LanguageEnglish, German

Test elements

NamePoints/WeightCategoryDuration/Extent
Exam Factory Management100written40 minutes
Exam Virtual Product Development100written40 minutes
Documented practical performance assessment: Methods of Factory Operations MSc / 2 ECTS credits100flexibelApprox. 10-page report, approx. 15-minute presentation.
Documented practical performance assessment: Exercise in Virtual Product Development I in small groups of two students / CAD model and configured bill of materials (BOM)34practical1 configured BOM
Documented practical performance assessment: Exercise in Virtual Product Development I in small groups of two students / CAD model and technical drawing derivation33practical1 Drawing
Documented practical performance assessment: Exercise in Virtual Product Development I in small groups of two students / CAD model and assembly of a component group33practical1 Assembly

Exam description

Maximum achievable score: 300 points

Grading scale:
285.0 to 300.0 points ….. 1.0
270.0 to 284.9 points ….. 1.3
255.0 to 269.9 points ….. 1.7
240.0 to 254.9 points ….. 2.0
225.0 to 239.9 points ….. 2.3
210.0 to 224.9 points ….. 2.7
195.0 to 209.9 points ….. 3.0
180.0 to 194.9 points ….. 3.3
165.0 to 179.9 points ….. 3.7
150.0 to 164.9 points ….. 4.0
0.0 to 149.9 points …….. 5.0

Duration of the module

The following number of semesters is estimated for taking and completing the module: 2 semester(s).

This module can be started in the following semesters: Winter and summer semester.

Maximum number of participants

This module is not limited to a number of students.

Registration procedures

The binding selection of elective compulsory components takes place during the first session of the respective elective compulsory course.

To participate in the written examination as the assessment for the compulsory lecture (VL) Factory Management, registration via the accompanying teaching platform “ISIS” is required. Access data and participation deadlines will be announced at the beginning of the semester during the corresponding lecture.

Recommended reading, lecture notes

Lecture notes

unavailable

Electronic lecture notes

available – The lecture notes will be provided on ISIS.

Recommended literature

No recommended literature given

Assigned programs

This module version is used in the following programs:

Program / program versionSemester(s)Curriculum component
Industrial Engineering and Management
Industrial Engineering and Management (M. Sc.) - StuPO 2015
WS 2026/27Ingenieurwissenschaftliche Studienrichtungen/Engineering Majors › Logistik/Logistics (LOG) › Logistik/Logistics (Wahlpflicht/Compulsory-Elective)
Industrial Engineering and Management
Industrial Engineering and Management (M. Sc.) - StuPO 2026
WS 2026/27Engineering Sciences / Specialization › Mechanical Engineering › Mechanical Engineering (Compulsory)
The module is particularly suitable for master’s degree programs in industrial engineering and management, mechanical engineering, production engineering, and computer science.

Miscellaneous

The lecture Factory Management is conducted in English.