Skip to content
Technische Universität Berlin Deutsch
Course catalog and module transfer system

Introduction into the track guidance of rail vehiclesModule description #50266 / Version 7

← Module page Deutsche Fassung
This module description is not valid in the current semester (Winter semester 2026/27). Current version (v8)
Module / Version#50266 / #7
ValiditySummer semester 2025 – Summer semester 2025
Available language(s)German
Credit points6
Person responsible for the moduleHecht, Markus
GradingGraded
Exam formatPortfolio examination
Language(s) of instructionGerman

Affiliation

FacultyFakultät V
InstituteInstitut für Land- und Seeverkehr
Academic chair35331800 FG Schienenfahrzeuge

Contact

OfficeSG 14
Contact personZarabi-Grittke, Lisa Noelle
E-mail addressl.grittke@tu-berlin.de
Websitehttps://www.tu.berlin/schienenfzg/studium-lehre/lehre

Learning outcomes

By successfully completing this module, students will be able to understand complex relationships between track guidance and the wheel-rail contact of rail vehicles. They will also gain an insight into the use of simulation technology in the railroad sector, which can be further deepened in subsequent modules in the subject area. The independent processing and solving of problems is encouraged through exercises. The knowledge acquired in the exercises is applied and thus deepened in two homework assignments during the semester. In the homework assignments, practical tasks are solved using MATLAB, whereby no previous knowledge is required. Corresponding basic knowledge of MATLAB is taught as part of the exercise and deepened by working independently on tutorials.

Content

Track guidance is the most important system characteristic of rail vehicles. The low energy losses of the wheel-rail system and the ability to form long trains contribute significantly to the high energy efficiency and sustainability of rail transportation. In the lecture, the theoretical basics are first developed, which are suitably deepened in the exercise with the help of practical examples and calculations.

The following aspects are considered in the course:
- Tractive force-speed characteristic curve of rail vehicles
- Driving cycles of rail vehicles
- Running resistances of rail vehicles
- Forces in wheel-rail contact
- Profile geometries of wheel and rail and their effects on wheel-rail contact
- Sinusoidal running of rail vehicles on the track
- Clearance profiles of rail vehicles
- Basics of alignment and track position
- Introduction to multi-body simulation technology using the example of rail vehicles
- Modeling and evaluation of simulation results

Module components

Compulsory area

The following courses are mandatory for this module:

CoursesTypeNumberFrequencyLanguageHours per weekCourse catalog
Grundlagen der SpurführungLecture0533 L 711 Winter semester[de]2 ISIS
Grundlagen der SpurführungExercise03533 L 10646 Winter semester[de]2 ISIS

Courses in the course catalog

Courses created from the teaching units of this module.

Winter semester 2026/27 (2)

Grundlagen der Spurführung (Lecture) 1

All groups of this course in the catalog

Grundlagen der Spurführung (Exercise) 1

All groups of this course in the catalog

Workload and credit points

Grundlagen der Spurführung (Lecture)

Workload descriptionMultiplierHoursTotal
Attendance152 h30 h
Pre/post processing154 h60 h
90 h

Grundlagen der Spurführung (Exercise)

Workload descriptionMultiplierHoursTotal
Attendance152 h30 h
Pre/post processing154 h60 h
90 h

The workload of the module adds up to 180 hours. The module therefore comprises 6 credit points.

Description of teaching and learning methods

Die Lehrinhalte werden durch Vorlesungen und Übungen vermittelt. In den Übungen werden die Themen der Vorlesung vertieft.

Requirements for participation and examination

Desirable prerequisites for participation in the courses:

- Einführung in die Schienenfahrzeugtechnik
- Kinematik und Dynamik

Mandatory requirements for the module examination registration:

This module has no examination requirements.

Completion of the module

GradingGraded
Exam formatPortfolio examination
Type of portfolio examination100 points in total
LanguageGerman

Test elements

NamePoints/WeightCategoryDuration/Extent
Mündliche Rücksprache40oral15 min
Schriftliche Teilprüfung40written75 min
2 semesterbegleitende Hausaufgaben20flexibelflexibel

Duration of the module

The following number of semesters is estimated for taking and completing the module: 1 semester(s).

This module can be started in the following semesters: Winter semester.

Maximum number of participants

This module is not limited to a number of students.

Registration procedures

Die Prüfungsanmeldung ist in den ersten sechs Wochen nach Beginn der Vorlesungszeit über QISPOS bzw. schriftlich im Referat Prüfungen (bei Belegung als freies Wahlfach) erforderlich.

Recommended reading, lecture notes

Lecture notes

unavailable

Electronic lecture notes

available

Recommended literature

No recommended literature given

Assigned programs

This module version is used in the following programs:

Program / program versionSemester(s)Curriculum component
Automotive Engineering (teacher training)
Kernfach StuPO 2016
SS 2025Fachwissenschaftlicher Vertiefungsbereich
Automotive Engineering (teacher training)
Automotive Engineering (teacher training) (B. Sc.) - Kernfach StuPO 2020
SS 2025Wahlpflichtbereich › Fachwissenschaftlicher Wahlpflichtbereich
Automotive Engineering (teacher training)
Zweitfach StuPO 2016
SS 2025Fachwissenschaftlicher Vertiefungsbereich
Automotive Engineering (teacher training)
Automotive Engineering (teacher training) (B. Sc.) - Zweitfach StuPO 2020
SS 2025Wahlpflichtbereich › Fachwissenschaftlicher Wahlpflichtbereich
Computational Engineering Science (Informationstechnik im Maschinenwesen)
StuPO 2018 (17.01.2018)
SS 20254. Profilbereich › 4.2 Profilbereich: Konstruktion und Fertigung › 4.2c Produktorientierte Fächer
Engineering Science
StuPO 2007 (19.12.2007)
SS 20252.4 Festkörpermechanik › 2.4b Ergänzungsbereich
Engineering Science
StuPO 2020
SS 20252.4 Festkörpermechanik › 2.4b Ergänzungsbereich
Industrial Engineering and Management
Industrial Engineering and Management (M. Sc.) - StuPO 2015
SS 2025Ingenieurwissenschaftliche Studienrichtungen/Engineering Majors › Verkehrswesen/Transportation Engineering (VW) › Verkehrswesen/Transportation Engineering (Wahlpflicht/Compulsory-Elective) › Railway Engineering
Mechanical Engineering
StuPO 2017
SS 2025Wahlpflichtmodule › Schwerpunktmodule › Produktorientierung › Fahrzeug-, Luft- und Raumfahrttechnik
Mechanical Engineering
StuPO 2017
SS 2025Wahlpflichtmodule › Profilmodule › Produkte
Patent Engineering
StuPO 2015
SS 20252.2. Ingenieurwissenschaftliche Profilmodule › 2.2.3. Produkte
Technomathematics
Technomathematics (M. Sc.) - StuPO 2014
SS 2025Studienrichtungen › Verkehrswesen › Verkehrswesen › Planung und Betrieb
Technomathematics
Technomathematics (B. Sc.) - StuPO 2014
SS 2025Studienrichtungen › Technisches Gebiet - Maschinenbau › Schwerpunkt › Fahrzeugtechnik
Transport Systems
StuPO 2018
SS 2025B. Studienrichtungen › Fahrzeugtechnik › 4. Vertiefungs- und Anwendungsbereich
Transportation Planning and Operation
StuPO 2017
SS 20252. Profilmodule
Vehicle Engineering
StuPO 2017
SS 20252. Profilmodule › 2.1 Schienenfahrzeugtechnik

Miscellaneous

Not specified