Composite Lightweight Design IModule description #50268 / Version 8
- 6 CP
- Portfolio examination
- Graded
- Summer semester
- German
| Module / Version | #50268 / #8 |
|---|---|
| Validity | Since Summer semester 2025 |
| Available language(s) | English, German |
| Credit points | 6 |
| Person responsible for the module | Bardenhagen, Andreas |
| Grading | Graded |
| Exam format | Portfolio examination |
| Language(s) of instruction | German |
Affiliation
| Faculty | Fakultät V |
|---|---|
| Institute | Institut für Luft- und Raumfahrt |
| Academic chair | 35341100 FG Luftfahrzeugbau und Leichtbau |
Contact
| Office | F 2 |
|---|---|
| Contact person | Krimmer, Alexander |
| E-mail address | andreas.bardenhagen@tu-berlin.de |
| Website | https://www.luftbau.tu-berlin.de/menue/studium_und_lehre/lehrangebot/faserverbundleichtbau/ |
Learning outcomes
The objective is to acquire knowledge about:
• the materials and their properties used in the construction of fiber composites
• the manufacturing processes used to produce fiber composites
• the calculation methods (classical laminate theory and net theory) used to determine the
mechanical properties of fiber composites
• current strength hypotheses and failure criteria for individual layers
• the quantities to be measured for characterizing material behavior
• the execution and evaluation of tests to determine material parameters
The objective is to acquire skills in:
• calculating fiber composite laminates using classical laminate theory
• designing and manufacturing tensile and compression test specimens
• evaluating tensile and compression tests
• preparing test reports
The objective is to develop competence in:
• designing fiber composite laminates
• selecting suitable manufacturing methods for fiber composites
• determining material parameters in accordance with relevant standards
• the materials and their properties used in the construction of fiber composites
• the manufacturing processes used to produce fiber composites
• the calculation methods (classical laminate theory and net theory) used to determine the
mechanical properties of fiber composites
• current strength hypotheses and failure criteria for individual layers
• the quantities to be measured for characterizing material behavior
• the execution and evaluation of tests to determine material parameters
The objective is to acquire skills in:
• calculating fiber composite laminates using classical laminate theory
• designing and manufacturing tensile and compression test specimens
• evaluating tensile and compression tests
• preparing test reports
The objective is to develop competence in:
• designing fiber composite laminates
• selecting suitable manufacturing methods for fiber composites
• determining material parameters in accordance with relevant standards
Content
Lecture:
• Fiber and matrix materials
• Fiber-reinforced composites
• Manufacturing technologies
• Classical laminate theory
• Strength hypotheses
• Determination of laminate properties
• Non-destructive testing of fiber composites
Project:
• Design of laminates using classical laminate theory
• Strength analysis of fiber composites
• Manufacturing and testing of fiber-reinforced composite specimens
• Determination of material properties according to relevant standards
• Fiber and matrix materials
• Fiber-reinforced composites
• Manufacturing technologies
• Classical laminate theory
• Strength hypotheses
• Determination of laminate properties
• Non-destructive testing of fiber composites
Project:
• Design of laminates using classical laminate theory
• Strength analysis of fiber composites
• Manufacturing and testing of fiber-reinforced composite specimens
• Determination of material properties according to relevant standards
Module components
Compulsory area
The following courses are mandatory for this module:
Workload and credit points
Faserverbundleichtbau I (Lecture)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Attendance | 15 | 2 h | 30 h |
| Pre/post processing | 15 | 4 h | 60 h |
| 90 h | |||
Faserverbundleichtbau I (Project)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| On-site attendance time | 15 | 2 h | 30 h |
| project work | 15 | 4 h | 60 h |
| 90 h | |||
The workload of the module adds up to 180 hours. The module therefore comprises 6 credit points.
Description of teaching and learning methods
Lectures and exercises take place either in person on campus (in lecture halls) or via video conference.
Project work is carried out in small groups in the department's workshop and test facility.
Project work is carried out in small groups in the department's workshop and test facility.
Requirements for participation and examination
Desirable prerequisites for participation in the courses:
Calculus, Linear Algebra, Differential Equations
Engineering Statics and Elementary Strength of Materials
Materials Science and Engineering
Engineering Statics and Elementary Strength of Materials
Materials Science and Engineering
Mandatory requirements for the module examination registration:
The examination requirements could not be retrieved.
Completion of the module
| Grading | Graded |
|---|---|
| Exam format | Portfolio examination |
| Type of portfolio examination | 100 points in total |
| Language | German |
Test elements
| Name | Points/Weight | Category | Duration/Extent |
|---|---|---|---|
| Presentation | 20 | oral | ca. 30 minutes |
| Report | 40 | written | ca. 30 pages |
| oral exam | 40 | oral | ca. 30 minutes |
Exam description
The module includes a significant practical component. The results of the practical work are presented in an oral presentation and documented in a written report. The lecture content is part of an oral examination. The following grading scale, recommended by the examination committee for portfolio assessments, is applied:
≥ 95 - 1.0
≥ 90 - 1.3
≥ 85 - 1.7
≥ 80 - 2.0
≥ 75 - 2.3
≥ 70 - 2.7
≥ 65 - 3.0
≥ 60 - 3.3
≥ 55 - 3.7
≥ 50 - 4.0
< 50 - 5.0
≥ 95 - 1.0
≥ 90 - 1.3
≥ 85 - 1.7
≥ 80 - 2.0
≥ 75 - 2.3
≥ 70 - 2.7
≥ 65 - 3.0
≥ 60 - 3.3
≥ 55 - 3.7
≥ 50 - 4.0
< 50 - 5.0
Duration of the module
The following number of semesters is estimated for taking and completing the module: 2 semester(s).
This module can be started in the following semesters: Summer semester.
Maximum number of participants
The maximum capacity of participants is 30.
Registration procedures
Course registration is completed by enrolling in the corresponding ISIS course.
Examination registration is carried out in accordance with the applicable examination regulations.
Examination registration is carried out in accordance with the applicable examination regulations.
Recommended reading, lecture notes
Lecture notes
unavailable
Electronic lecture notes
unavailable
Recommended literature
- Barbero. Introduction to Composite Materials Design. CRC Press
- Schürmann. Konstruieren mit Faser-Kunststoff-Verbunden. Springer
Assigned programs
This module version is used in the following programs:
| Program / program version | Semester(s) | Curriculum component |
|---|---|---|
| Aeronautics and Astronautics StuPO 2018 | WS 2025/26 | 2. Kernmodule › 2.2 Luftfahrzeugbau und Leichtbau |
| SS 2026 | 2. Kernmodule › 2.2 Luftfahrzeugbau und Leichtbau | |
| WS 2026/27 | 3. Profilmodule › 3.2 Luftfahrzeugbau und Leichtbau | |
| Engineering Science StuPO 2007 (19.12.2007) | WS 2025/26 | 2.4 Festkörpermechanik › 2.4b Ergänzungsbereich |
| SS 2026 | 2.4 Festkörpermechanik › 2.4b Ergänzungsbereich | |
| Engineering Science StuPO 2020 | WS 2025/26 | 2.4 Festkörpermechanik › 2.4b Ergänzungsbereich |
| SS 2026 | 2.4 Festkörpermechanik › 2.4b Ergänzungsbereich | |
| WS 2026/27 | 2.4 Festkörpermechanik › 2.4b Ergänzungsbereich | |
| Industrial Engineering and Management Industrial Engineering and Management (M. Sc.) - StuPO 2015 | WS 2025/26 | Ingenieurwissenschaftliche Studienrichtungen/Engineering Majors › Verkehrswesen/Transportation Engineering (VW) › Verkehrswesen/Transportation Engineering (Wahlpflicht/Compulsory-Elective) › Aerospace Engineering |
| SS 2026 | Ingenieurwissenschaftliche Studienrichtungen/Engineering Majors › Verkehrswesen/Transportation Engineering (VW) › Verkehrswesen/Transportation Engineering (Wahlpflicht/Compulsory-Elective) › Aerospace Engineering | |
| WS 2026/27 | Ingenieurwissenschaftliche Studienrichtungen/Engineering Majors › Verkehrswesen/Transportation Engineering (VW) › Verkehrswesen/Transportation Engineering (Wahlpflicht/Compulsory-Elective) › Aerospace Engineering | |
| Industrial Engineering and Management Industrial Engineering and Management (M. Sc.) - StuPO 2026 | WS 2026/27 | Engineering Sciences / Specialization › Transportation Engineering › Aerospace Engineering |
| Material Science and Engineering StuPO 2009 | WS 2025/26 | Vertiefungsmodule |
| SS 2026 | Vertiefungsmodule | |
| WS 2026/27 | Vertiefungsmodule | |
| Material Science and Engineering Material Science and Engineering (M. Sc.) - StuPO 2024 | WS 2025/26 | Fachzspezifische Wahlpflicht › Natur- und ingenieurwissenschaftliche Aspekte der Materialwissenschaft und Werkstofftechnik › Sonstige Module |
| SS 2026 | Fachzspezifische Wahlpflicht › Natur- und ingenieurwissenschaftliche Aspekte der Materialwissenschaft und Werkstofftechnik › Sonstige Module | |
| WS 2026/27 | Fachzspezifische Wahlpflicht › Natur- und ingenieurwissenschaftliche Aspekte der Materialwissenschaft und Werkstofftechnik › Sonstige Module | |
| Mechanical Engineering StuPO 2017 | WS 2025/26 | Wahlpflichtmodule › Profilmodule › Werkstoffe |
| SS 2026 | Wahlpflichtmodule › Profilmodule › Werkstoffe | |
| WS 2026/27 | Wahlpflichtmodule › Profilmodule › Werkstoffe | |
| Technomathematics Technomathematics (M. Sc.) - StuPO 2014 | WS 2025/26 | Studienrichtungen › Verkehrswesen › Verkehrswesen › Luft- und Raumfahrttechnik |
| SS 2026 | Studienrichtungen › Verkehrswesen › Verkehrswesen › Luft- und Raumfahrttechnik | |
| WS 2026/27 | Studienrichtungen › Verkehrswesen › Verkehrswesen › Luft- und Raumfahrttechnik | |
| Vehicle Engineering StuPO 2017 | WS 2025/26 | 2. Profilmodule › 2.3 Ingenieurtechnische Grundlagen und Methoden |
| SS 2026 | 2. Profilmodule › 2.3 Ingenieurtechnische Grundlagen und Methoden | |
| WS 2026/27 | 2. Profilmodule › 2.3 Ingenieurtechnische Grundlagen und Methoden |
Suitable degree program:
• Master's in Aerospace Engineering
• Other engineering degree programs with a focus on structures
Relevant areas of specialization:
• Lightweight Design
Foundation for:
• Composite Lightweight Design II
• Master's in Aerospace Engineering
• Other engineering degree programs with a focus on structures
Relevant areas of specialization:
• Lightweight Design
Foundation for:
• Composite Lightweight Design II
Miscellaneous
Not specified