Skip to content
Technische Universität Berlin Deutsch
Course catalog and module transfer system

Composite Lightweight Design IIModule description #50269 / Version 10

← Module page Deutsche Fassung
Module / Version#50269 / #10
ValiditySince Summer semester 2025
Available language(s)English, German
Credit points6
Person responsible for the moduleBardenhagen, Andreas
GradingGraded
Exam formatPortfolio examination
Language(s) of instructionGerman

Affiliation

FacultyFakultät V
InstituteInstitut für Luft- und Raumfahrt
Academic chair35341100 FG Luftfahrzeugbau und Leichtbau

Contact

OfficeF 2
Contact personBardenhagen, Andreas
E-mail addressandreas.bardenhagen@tu-berlin.de
Websitehttps://www.luftbau.tu-berlin.de/menue/studium_und_lehre/lehrangebot/faserverbundleichtbau/

Learning outcomes

The aim is to acquire knowledge in:
• Evaluation of tensile tests and statistics
• Manufacturing and joining techniques for fiber composite structures
• Handling of manufacturing deviations and tolerances
• Testing and inspection methods
• Design and safety concepts
• Design of slender, highly loaded structures, e.g., wind turbine rotor blades

The aim is to develop skills in:
• Calculating failure safety of flat orthotropic surfaces with respect to strength and stability
• Strength design of bonded joints
• Defining a design space for optimizing simple load-bearing structures
• Instrumentation, execution, and evaluation of component load tests
• Preparing test reports

The aim is to acquire competence in:
• Optimal design of fiber composite structures
• Structured analysis of component loads
• Planning and execution of component load tests

Content

Lecture:
• Evaluation of test data and statistics
• Manufacturing and joining techniques
• Geometric deviations and tolerances
• Testing and inspection methods
• Design and safety concepts
• Design of slender, highly loaded structures, e.g., wind turbine rotor blades
• Sustainability aspects in lightweight design and the use of fiber-reinforced composites

Project:
• Design of a fiber composite structure with respect to stiffness, strength, and stability
• Programming of design tools based on classical laminate theory
• Optimization of the laminate layup
• Manufacturing of the designed fiber composite structure
• Proof of structural integrity in a destructive structural test
• Evaluation of test results and validation of the structural model

Excursion:
At the end of the semester, an excursion is offered to provide practical context to the course content and to illustrate the current state of the fiber composite manufacturing industry. The excursion includes visits to two industrial companies from different sectors (e.g., aerospace and wind energy) to observe the production of fiber composite structural components.

Module components

Compulsory area

The following courses are mandatory for this module:

CoursesTypeNumberFrequencyLanguageHours per weekCourse catalog
Faserverbundleichtbau IIProject3534 L 002 Winter and summer semester[de]4 ISIS
Faserverbundleichtbau IILecture3534 L 003 Winter semester[de]2 ISIS

Courses in the course catalog

Courses created from the teaching units of this module.

Winter semester 2026/27 (2)

Faserverbundleichtbau II (Project) 1

All groups of this course in the catalog

Faserverbundleichtbau II (Lecture) 1

All groups of this course in the catalog

Workload and credit points

Faserverbundleichtbau II (Project)

Workload descriptionMultiplierHoursTotal
On-site attendance time152 h30 h
project work156 h90 h
120 h

Faserverbundleichtbau II (Lecture)

Workload descriptionMultiplierHoursTotal
Attendance152 h30 h
Pre/post processing152 h30 h
60 h

The workload of the module adds up to 180 hours. The module therefore comprises 6 credit points.

Description of teaching and learning methods

Lecture, analytical and practical project work, experiment, excursion

Requirements for participation and examination

Desirable prerequisites for participation in the courses:

Calculus, Linear Algebra, Differential Equations
Engineering Statics and Elementary Strength of Materials
Materials Science and Engineering

Mandatory requirements for the module examination registration:

The examination requirements could not be retrieved.

Completion of the module

GradingGraded
Exam formatPortfolio examination
Type of portfolio examination100 points in total
LanguageGerman

Test elements

NamePoints/WeightCategoryDuration/Extent
oral exam40oralca. 40 minutes
Presentation20oralca. 30 minutes
Report40writtenca. 30 pages

Exam description

The module includes a significant practical component. The results of the practical work are presented in an oral presentation and documented in a written report. The lecture content is part of an oral examination. The following grading scale, recommended by the examination committee for portfolio assessments, is applied:
≥ 95 - 1.0
≥ 90 - 1.3
≥ 85 - 1.7
≥ 80 - 2.0
≥ 75 - 2.3
≥ 70 - 2.7
≥ 65 - 3.0
≥ 60 - 3.3
≥ 55 - 3.7
≥ 50 - 4.0
< 50 - 5.0

Duration of the module

The following number of semesters is estimated for taking and completing the module: 2 semester(s).

This module can be started in the following semesters: Winter semester.

Maximum number of participants

The maximum capacity of participants is 20.

Registration procedures

Course registration is completed by enrolling in the corresponding ISIS course.
Examination registration is carried out in accordance with the applicable examination regulations.

Recommended reading, lecture notes

Lecture notes

unavailable

Electronic lecture notes

unavailable

Recommended literature

  • Schürmann: Konstruieren mit Faser-Kunststoff-Verbunden. 2. Aufl. Springer
  • Barbero: Introduction to Composite Materials Design. 2nd ed. CRC Press

Assigned programs

This module version is used in the following programs:

Program / program versionSemester(s)Curriculum component
Aeronautics and Astronautics
StuPO 2018
WS 2025/263. Profilmodule › 3.2 Luftfahrzeugbau und Leichtbau
SS 20263. Profilmodule › 3.2 Luftfahrzeugbau und Leichtbau
WS 2026/273. Profilmodule › 3.2 Luftfahrzeugbau und Leichtbau
Engineering Science
StuPO 2007 (19.12.2007)
WS 2025/262.4 Festkörpermechanik › 2.4b Ergänzungsbereich
SS 20262.4 Festkörpermechanik › 2.4b Ergänzungsbereich
Engineering Science
StuPO 2020
WS 2025/262.4 Festkörpermechanik › 2.4b Ergänzungsbereich
SS 20262.4 Festkörpermechanik › 2.4b Ergänzungsbereich
WS 2026/272.4 Festkörpermechanik › 2.4b Ergänzungsbereich
Industrial Engineering and Management
Industrial Engineering and Management (M. Sc.) - StuPO 2015
WS 2025/26Ingenieurwissenschaftliche Studienrichtungen/Engineering Majors › Verkehrswesen/Transportation Engineering (VW) › Verkehrswesen/Transportation Engineering (Wahlpflicht/Compulsory-Elective) › Aerospace Engineering
SS 2026Ingenieurwissenschaftliche Studienrichtungen/Engineering Majors › Verkehrswesen/Transportation Engineering (VW) › Verkehrswesen/Transportation Engineering (Wahlpflicht/Compulsory-Elective) › Aerospace Engineering
WS 2026/27Ingenieurwissenschaftliche Studienrichtungen/Engineering Majors › Verkehrswesen/Transportation Engineering (VW) › Verkehrswesen/Transportation Engineering (Wahlpflicht/Compulsory-Elective) › Aerospace Engineering
Industrial Engineering and Management
Industrial Engineering and Management (M. Sc.) - StuPO 2026
WS 2026/27Engineering Sciences / Specialization › Transportation Engineering › Aerospace Engineering
Material Science and Engineering
StuPO 2009
WS 2025/26Vertiefungsmodule
SS 2026Vertiefungsmodule
WS 2026/27Vertiefungsmodule
Material Science and Engineering
Material Science and Engineering (M. Sc.) - StuPO 2024
WS 2025/26Fachzspezifische Wahlpflicht › Natur- und ingenieurwissenschaftliche Aspekte der Materialwissenschaft und Werkstofftechnik › Sonstige Module
SS 2026Fachzspezifische Wahlpflicht › Natur- und ingenieurwissenschaftliche Aspekte der Materialwissenschaft und Werkstofftechnik › Sonstige Module
WS 2026/27Fachzspezifische Wahlpflicht › Natur- und ingenieurwissenschaftliche Aspekte der Materialwissenschaft und Werkstofftechnik › Sonstige Module
Mechanical Engineering
StuPO 2017
WS 2025/26Wahlpflichtmodule › Profilmodule › Werkstoffe
SS 2026Wahlpflichtmodule › Profilmodule › Werkstoffe
WS 2026/27Wahlpflichtmodule › Profilmodule › Werkstoffe
Technomathematics
Technomathematics (M. Sc.) - StuPO 2014
WS 2025/26Studienrichtungen › Verkehrswesen › Verkehrswesen › Luft- und Raumfahrttechnik
SS 2026Studienrichtungen › Verkehrswesen › Verkehrswesen › Luft- und Raumfahrttechnik
WS 2026/27Studienrichtungen › Verkehrswesen › Verkehrswesen › Luft- und Raumfahrttechnik
Vehicle Engineering
StuPO 2017
WS 2025/262. Profilmodule › 2.3 Ingenieurtechnische Grundlagen und Methoden
SS 20262. Profilmodule › 2.3 Ingenieurtechnische Grundlagen und Methoden
WS 2026/272. Profilmodule › 2.3 Ingenieurtechnische Grundlagen und Methoden

Miscellaneous

Not specified