Manufacturing TechnologyModule description #50272 / Version 7
- 6 CP
- Portfolio examination
- Graded
- Winter and summer semester
- German
This module description is not valid in the current semester (Winter semester 2026/27).
Current version (v9)
| Module / Version | #50272 / #7 |
|---|---|
| Validity | Summer semester 2025 – Winter semester 2025/26 |
| Available language(s) | German |
| Credit points | 6 |
| Person responsible for the module | Uhlmann, Eckart |
| Grading | Graded |
| Exam format | Portfolio examination |
| Language(s) of instruction | German |
Affiliation
| Faculty | Fakultät V |
|---|---|
| Institute | Institut für Werkzeugmaschinen und Fabrikbetrieb (IWF) |
| Academic chair | 35361100 FG Werkzeugmaschinen und Fertigungstechnik |
Contact
| Office | PTZ 1 |
|---|---|
| Contact person | Bold, Jörg |
| E-mail address | bold@iwf.tu-berlin.de |
| Website | Not specified |
Learning outcomes
The aim is to impart physical and technical knowledge of the basic processes of production engineering, including technical and organisational methods. In addition to an overview of the most important manufacturing processes, the various mechanical, thermal and chemical operating principles for the manufacture of technical products will be taught. As a result of the course, students should be able to recognise the mode of action of manufacturing processes and be able to apply them according to different product requirements. This also includes the organisational and methodological skills to combine manufacturing processes into production process chains, to create work plans, to control work processes and to be able to integrate manufacturing processes into the factory operation system.
Content
DIN 8580 provides the technical basis for teaching manufacturing knowledge. It covers the manufacturing processes of the DIN main groups of primary forming, forming, cutting, joining, coating and material property modification. The corresponding manufacturing systems are presented for the respective manufacturing processes and their operating principles. There is an introduction to the methodology of measuring manufacturing accuracy and the process-specific influencing factors. In addition, aspects of production organisation such as production process chains, work planning, production control and automation of production systems are dealt with as an introduction. In addition to the lecture, a practice-orientated manufacturing technology exercise is offered. In the tutorial, the material covered in the lecture is deepened using practical examples. Manufacturing processes and machine systems are presented and contribute to a better understanding of the subject matter.
Module components
Compulsory area
The following courses are mandatory for this module:
| Courses | Type | Number | Frequency | Language | Hours per week | Course catalog |
|---|---|---|---|---|---|---|
| Fertigungstechnik | Lecture | 0536 L 050 | Winter and summer semester | [de] | 2 | WS 2026/27 (1) ISIS |
| Fertigungstechnik | Exercise | 117 | Winter and summer semester | [de] | 2 | ISIS |
Courses in the course catalog
Courses created from the teaching units of this module.
Winter semester 2026/27 (1)
Fertigungstechnik (Lecture) 1
- Fertigungstechnik (Vorlesung) 1. Termingruppe 0536 L 050
Workload and credit points
Fertigungstechnik (Lecture)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Time in attendance | 15 | 2 h | 30 h |
| Preparation/follow-up | 15 | 4 h | 60 h |
| 90 h | |||
Fertigungstechnik (Exercise)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Time in attendance | 15 | 2 h | 30 h |
| Preparation/follow-up | 15 | 4 h | 60 h |
| 90 h | |||
The workload of the module adds up to 180 hours. The module therefore comprises 6 credit points.
Description of teaching and learning methods
The lecture is offered with interactive participation of the students in the sense of the development and presentation of topic-specific technical papers. Attendance at the production engineering exercise is compulsory. The exercises take place as block courses, the learning objectives of which are assessed in a test at the end of the semester.
Requirements for participation and examination
Desirable prerequisites for participation in the courses:
a) obligatory: no special prerequisites required
b) desirable: basic knowledge of physics, mechanics, materials technology
b) desirable: basic knowledge of physics, mechanics, materials technology
Mandatory requirements for the module examination registration:
This module has no examination requirements.
Completion of the module
| Grading | Graded |
|---|---|
| Exam format | Portfolio examination |
| Type of portfolio examination | 100 points in total |
| Language | German |
Test elements
| Name | Points/Weight | Category | Duration/Extent |
|---|---|---|---|
| Lecture exam | 75 | written | 60 |
| Test certificate for the exercise | 25 | flexibel | 60 |
Exam description
The overall grade is calculated from the sum of the points achieved in the exercise test (max. 25) and the points achieved in a final written performance assessment (max. 75) on the lecture content.
Participation in all exercise sessions is mandatory in order to complete the module.
The module is assessed according to the following grading scale:
95.0 to 100.0 points ... 1,0
90.0 to 94.9 points ..... 1.3
85.0 to 89.9 points ..... 1.7
80.0 to 84.9 points ..... 2.0
75.0 to 79.9 points ..... 2.3
70.0 to 74.9 points ..... 2.7
65.0 to 69.9 points ..... 3.0
60.0 to 64.9 points ..... 3.3
55.0 to 59.9 points ..... 3.7
50.0 to 54.9 points ..... 4.0
0.0 to 49.9 points ....... 5.0
Participation in all exercise sessions is mandatory in order to complete the module.
The module is assessed according to the following grading scale:
95.0 to 100.0 points ... 1,0
90.0 to 94.9 points ..... 1.3
85.0 to 89.9 points ..... 1.7
80.0 to 84.9 points ..... 2.0
75.0 to 79.9 points ..... 2.3
70.0 to 74.9 points ..... 2.7
65.0 to 69.9 points ..... 3.0
60.0 to 64.9 points ..... 3.3
55.0 to 59.9 points ..... 3.7
50.0 to 54.9 points ..... 4.0
0.0 to 49.9 points ....... 5.0
Duration of the module
The following number of semesters is estimated for taking and completing the module: 1 semester(s).
This module can be started in the following semesters: Winter and summer semester.
Maximum number of participants
This module is not limited to a number of students.
Registration procedures
Module registration is done via ISIS.
Recommended reading, lecture notes
Lecture notes
available – Lecture assistants
Electronic lecture notes
available – Access data will be announced in the first lecture.
Recommended literature
- Spur/Stöferle: "Handbuch der Fertigungstechnik"
Assigned programs
This module version is used in the following programs:
| Program / program version | Semester(s) | Curriculum component |
|---|---|---|
| Industrial Engineering and Management Industrial Engineering and Management (B. Sc.) - StuPO 2015 | SS 2025 | Ingenieurwissenschaftliche Studienrichtungen › Maschinenbau (MB) › Maschinenbau (Wahlpflicht) |
| WS 2025/26 | Ingenieurwissenschaftliche Studienrichtungen › Maschinenbau (MB) › Maschinenbau (Wahlpflicht) | |
| SS 2026 | Ingenieurwissenschaftliche Studienrichtungen › Maschinenbau (MB) › Maschinenbau (Wahlpflicht) | |
| Mechanical Engineering StuPO 2017 | SS 2025 | Pflichtbereich › Technische Grundlagen |
| WS 2025/26 | Pflichtbereich › Technische Grundlagen | |
| Metals Engineering (teacher training) Metals Engineering (teacher training) (B. Sc.) - StuPO 2015 | SS 2025 | Fachwissenschaft › Pflichtbereich |
| WS 2025/26 | Fachwissenschaft › Pflichtbereich | |
| Sociology and Technology Studies StuPO 2014 (7. Mai 2014) | SS 2025 | Technisches Fach › Fabrikmanagement › Vertiefungsbereich |
| WS 2025/26 | Technisches Fach › Fabrikmanagement › Vertiefungsbereich |
Compulsory module in the BSc Mechanical Engineering programme and compulsory elective module in the BSc Industrial Engineering and Management programme, specialisation Mechanical Engineering/Transport Engineering.
Miscellaneous
Not specified