Strength and FatigueModule description #50276 / Version 5
- 6 CP
- Oral exam
- Graded
- Winter semester
- German
| Module / Version | #50276 / #5 |
|---|---|
| Validity | Since Winter semester 2026/27 |
| Available language(s) | English, German |
| Credit points | 6 |
| Person responsible for the module | Liebich, Robert |
| Grading | Graded |
| Exam format | Oral exam |
| Language(s) of instruction | German |
Affiliation
| Faculty | Fakultät V |
|---|---|
| Institute | Institut für Maschinenkonstruktion und Systemtechnik (IMS) |
| Academic chair | 35351200 FG Konstruktion und Produktzuverlässigkeit |
Contact
| Office | H 66 |
|---|---|
| Contact person | Phan, Tien Dat |
| E-mail address | robert.liebich@tu-berlin.de |
| Website | https://www.tu.berlin/kup/studium-lehre/master/festigkeit-und-lebensdauer |
Learning outcomes
Knowledge:
Students will learn basic engineering statistics and how to differentiate between load types. They will be able to compile load collectives and consider special loads. Students will be able to differentiate between types of stress and failure and determine the associated failure hypotheses to be applied. In addition, students will learn the theories of fatigue, endurance and durability as well as crack initiation and propagation within linear elastic fracture mechanics. They also gain knowledge of thermal fatigue and creep of components. Students will learn the full range of static and dynamic strength analysis of metallic components. Mastering these strength analyses fulfills various sustainability requirements in the product development process due to the associated reduction in resource consumption and vibrations, and an extended service life.
Skills:
Upon completion of this module, students will be able to calculate stresses from loads, apply engineering statistics to component/calculated safety, analyze the static and dynamic stresses that occur, and apply suitable failure hypotheses. In addition, they will be able to carry out complete fatigue strength verifications and calculate crack propagation within linear-elastic fracture mechanics.
Expertise:
After successfully completing the module, students will have the necessary skills to independently carry out strength and service life assessments of statically and dynamically highly stressed structures. They will be able to evaluate the various influences on material and component behavior with regard to strength and service life. They will be able to make statements about the strength properties of any metallic component and generate design recommendations with regard to stress reduction or strength increase within a product development process.
Students will learn basic engineering statistics and how to differentiate between load types. They will be able to compile load collectives and consider special loads. Students will be able to differentiate between types of stress and failure and determine the associated failure hypotheses to be applied. In addition, students will learn the theories of fatigue, endurance and durability as well as crack initiation and propagation within linear elastic fracture mechanics. They also gain knowledge of thermal fatigue and creep of components. Students will learn the full range of static and dynamic strength analysis of metallic components. Mastering these strength analyses fulfills various sustainability requirements in the product development process due to the associated reduction in resource consumption and vibrations, and an extended service life.
Skills:
Upon completion of this module, students will be able to calculate stresses from loads, apply engineering statistics to component/calculated safety, analyze the static and dynamic stresses that occur, and apply suitable failure hypotheses. In addition, they will be able to carry out complete fatigue strength verifications and calculate crack propagation within linear-elastic fracture mechanics.
Expertise:
After successfully completing the module, students will have the necessary skills to independently carry out strength and service life assessments of statically and dynamically highly stressed structures. They will be able to evaluate the various influences on material and component behavior with regard to strength and service life. They will be able to make statements about the strength properties of any metallic component and generate design recommendations with regard to stress reduction or strength increase within a product development process.
Content
Optimum static and durable design of components with a focus on mechanical engineering and drive systems, including
- loads, load-time functions, load collectives, special loads
- determination of component stresses from loads
- suitable material-mechanics models alternative: suitable models for mechanics of materials
- the computational determination of multi-axial stresses using FEM (linear-elastic material behavior and modified Neuber-Hyperbola or elastic-plastic material behavior)
- residual and thermal stresses
- the associated static design concepts
- the associated fatigue, endurance and durability concepts for service life prediction
- reliability and safety
- the comparison of computational and experimental results for model improvement
- a fracture mechanics concept for the fatigue, endurance and durability of sharply notched and cracked components (crack propagation calculations) for the quality assurance and service phase
- determination of the remaining service life in operation
- determination of inspection intervals
- case analysis studies of known damage
- strength hypotheses for smooth and notched components, considering multiaxiality, plasticity, stress embrittlement and support effects
- common fatigue, endurance and durability verifications of normal notched components (nominal, structural and notch base stress concepts, LCF, HCF, creep)
- linear-elastic fracture mechanics
- and norms and standards
- loads, load-time functions, load collectives, special loads
- determination of component stresses from loads
- suitable material-mechanics models alternative: suitable models for mechanics of materials
- the computational determination of multi-axial stresses using FEM (linear-elastic material behavior and modified Neuber-Hyperbola or elastic-plastic material behavior)
- residual and thermal stresses
- the associated static design concepts
- the associated fatigue, endurance and durability concepts for service life prediction
- reliability and safety
- the comparison of computational and experimental results for model improvement
- a fracture mechanics concept for the fatigue, endurance and durability of sharply notched and cracked components (crack propagation calculations) for the quality assurance and service phase
- determination of the remaining service life in operation
- determination of inspection intervals
- case analysis studies of known damage
- strength hypotheses for smooth and notched components, considering multiaxiality, plasticity, stress embrittlement and support effects
- common fatigue, endurance and durability verifications of normal notched components (nominal, structural and notch base stress concepts, LCF, HCF, creep)
- linear-elastic fracture mechanics
- and norms and standards
Module components
Compulsory area
The following courses are mandatory for this module:
| Courses | Type | Number | Frequency | Language | Hours per week | Course catalog |
|---|---|---|---|---|---|---|
| Festigkeit und Lebensdauer | Lecture | 514 | Winter semester | [de] | 2 | WS 2026/27 (1) ISIS |
| Festigkeit und Lebensdauer | Exercise | 515 | Winter semester | [de] | 2 | WS 2026/27 (1) ISIS |
Courses in the course catalog
Courses created from the teaching units of this module.
Winter semester 2026/27 (2)
Festigkeit und Lebensdauer (Lecture) 1
- Festigkeit und Lebensdauer (Vorlesung) 1. Termingruppe 0535 L 561
Festigkeit und Lebensdauer (Exercise) 1
- Festigkeit und Lebensdauer (Übung) 1. Termingruppe 0535 L 563
Workload and credit points
Festigkeit und Lebensdauer (Lecture)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Attendance time | 15 | 2 h | 30 h |
| Preparation and follow-up | 15 | 2 h | 30 h |
| 60 h | |||
Festigkeit und Lebensdauer (Exercise)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Attendance time | 15 | 2 h | 30 h |
| Preparation and follow-up | 15 | 6 h | 90 h |
| 120 h | |||
The workload of the module adds up to 180 hours. The module therefore comprises 6 credit points.
Description of teaching and learning methods
The material presented in the lecture is applied and deepened in the exercise in the context of example tasks. Students will apply the knowledge they have learned in exercises and practice calculation and evaluation.
Requirements for participation and examination
Desirable prerequisites for participation in the courses:
a) obligatory: B.Sc. Mechanical Engineering, Transport Systems, Engineering Science
b) desirable: Energy Methods module, Data Analysis/Applied Statistics module, Statics and elementary Strength of Materials module
Mandatory prerequisites for module examination registration:
Performance record of “Strength and Fatigue”.
b) desirable: Energy Methods module, Data Analysis/Applied Statistics module, Statics and elementary Strength of Materials module
Mandatory prerequisites for module examination registration:
Performance record of “Strength and Fatigue”.
Mandatory requirements for the module examination registration:
The examination requirements could not be retrieved.
Completion of the module
| Grading | Graded |
|---|---|
| Exam format | Oral exam |
| Language | German |
| Duration/Extent | 30 minutes |
Duration of the module
The following number of semesters is estimated for taking and completing the module: 1 semester(s).
This module can be started in the following semesters: Winter semester.
Maximum number of participants
This module is not limited to a number of students.
Registration procedures
ISIS and MOSES
Recommended reading, lecture notes
Lecture notes
unavailable
Electronic lecture notes
available – www.kup.tu-berlin.de
Recommended literature
- FKM-Richtlinie: Bruchmechanischer Festigkeitsnachweis. Frankfurt: VDMA-Verlag 2001
- Hahn: Festigkeitsberechnung und Lebensdauerabschätzung für metallische Bauteile unter mehrachsig schwingender Beanspruchung. Berlin: Wissenschaft-und-Technik-Verlag 1995, zugleich Diss. TU Berlin 1995
- Haibach Betriebsfestigkeit - Verfahren und Daten zur Bauteilberechnung. Berlin: Springer 2002
- Issler, Ruoß, Häfele: Festigkeitslehre - Grundlagen. Berlin: Springer 2003
- Wellinger, Dietmann: Festigkeitsberechnung. Stuttgart: Kröner 1976
Assigned programs
This module version is used in the following programs:
| Program / program version | Semester(s) | Curriculum component |
|---|---|---|
| Aeronautics and Astronautics StuPO 2018 | WS 2026/27 | 1. Ingenieurwissenschaftliche Methoden › 1.2 Mechanik |
| Biomedical Engineering StuPO 2018 | WS 2026/27 | 2. Wahlpflichtmodule › 2.2 Ingenieurwissenschaftliche Vertiefungen |
| Computational Engineering Science (Informationstechnik im Maschinenwesen) StuPO 2018 (17.01.2018) | WS 2026/27 | 4. Profilbereich › 4.2 Profilbereich: Konstruktion und Fertigung › 4.2a Konstruktion und Gestaltung |
| Engineering Science StuPO 2020 | WS 2026/27 | 2.4 Festkörpermechanik › 2.4b Ergänzungsbereich |
| Industrial Engineering and Management Industrial Engineering and Management (M. Sc.) - StuPO 2015 | WS 2026/27 | Ingenieurwissenschaftliche Studienrichtungen/Engineering Majors › Maschinenbau/Mechanical Engineering (MB) › Maschinenbau/Mechanical Engineering (Wahlpflicht/Compulsory-Elective) › Engineering Design |
| Industrial Engineering and Management Industrial Engineering and Management (M. Sc.) - StuPO 2026 | WS 2026/27 | Engineering Sciences / Specialization › Mechanical Engineering › Mechanical Engineering (Compulsory Electives) › Sustainable Manufacturing |
| Mechanical Engineering StuPO 2017 | WS 2026/27 | Wahlpflichtmodule › Kernmodule › Berechnung |
| Patent Engineering StuPO 2015 | WS 2026/27 | 2.1. Ingenieurwissenschaftliche Kernmodule › 2.1.2. Berechnung |
| Technomathematics Technomathematics (M. Sc.) - StuPO 2014 | WS 2026/27 | Studienrichtungen › Maschinenbau › Maschinenbau › Kernmodule |
| Vehicle Engineering StuPO 2017 | WS 2026/27 | 2. Profilmodule › 2.3 Ingenieurtechnische Grundlagen und Methoden |
This module is particularly aimed at students from the MSc. Mechanical Engineering (core module Calculation) MSc. Biomedical Engineering (compulsory elective engineering specializations) and to Master's students interested in design from the fields of transportation (MSc Aerospace Engineering, Automotive Engineering) and Physical Engineering who see their professional field in the development and research of highly stressed components as well as drive and machine systems.
Miscellaneous
Not specified