Foundations of Human-Technology InteractionModule description #50334 / Version 6
- 6 CP
- Portfolio examination
- Graded
- Winter and summer semester
- German
| Module / Version | #50334 / #6 |
|---|---|
| Validity | Since Summer semester 2026 |
| Available language(s) | English, German |
| Credit points | 6 |
| Person responsible for the module | Döring, Tanja |
| Grading | Graded |
| Exam format | Portfolio examination |
| Language(s) of instruction | German |
Affiliation
| Faculty | Fakultät V |
|---|---|
| Institute | Institut für Psychologie und Arbeitswissenschaft (IPA) |
| Academic chair | 35321600 FG Interaktive Mensch-Technik-Systeme (IMT) |
Contact
| Office | MAR 3-1 |
|---|---|
| Contact person | Döring, Tanja |
| E-mail address | tanja.doering@tu-berlin.de |
| Website | https://www.tu.berlin/imt/studium-lehre/imt/uebersicht-ueber-unsere-lehrveranstaltungen |
Learning outcomes
The module “Fundamentals of Human-Technology Interaction” is aimed at students with no prior knowledge of human-technology interaction. The course provides an overview of the interdisciplinary problems and results involved in designing, analyzing, and evaluating interactive systems.
Knowledge:
• Fundamentals of human perception and information processing
• Fundamental concepts, principles, and models for designing interactive systems
• Technical implementation of user interfaces (input and output devices, interaction styles)
• Human-centered design
• User research
• Design and prototyping of user interfaces
• Design of usability and user experience evaluations for interactive systems
Skills and competencies:
• Confident use of technical terms related to human-technology interaction
• Application of fundamentals to practical questions within the scope of the exercise
• Application of human-centered design methods to the design of interactive systems, including requirements analysis, conception, prototyping, and evaluation methods
Knowledge:
• Fundamentals of human perception and information processing
• Fundamental concepts, principles, and models for designing interactive systems
• Technical implementation of user interfaces (input and output devices, interaction styles)
• Human-centered design
• User research
• Design and prototyping of user interfaces
• Design of usability and user experience evaluations for interactive systems
Skills and competencies:
• Confident use of technical terms related to human-technology interaction
• Application of fundamentals to practical questions within the scope of the exercise
• Application of human-centered design methods to the design of interactive systems, including requirements analysis, conception, prototyping, and evaluation methods
Content
• Interaction Design
• History of Human-Technology Interaction
• Usability and User Experience
• Perception and Human Information Processing
• Interaction Techniques, Input and Output
• Basics and Principles, e.g. Affordance, Mental Models, Metaphors, and Errros
• Models for Human-Technology Systems
• Human-Centered Design
• User Research and Requirements Engineering
• Prototyping User Interfaces
• Evaluation
• Ubiquitous Interaction
• History of Human-Technology Interaction
• Usability and User Experience
• Perception and Human Information Processing
• Interaction Techniques, Input and Output
• Basics and Principles, e.g. Affordance, Mental Models, Metaphors, and Errros
• Models for Human-Technology Systems
• Human-Centered Design
• User Research and Requirements Engineering
• Prototyping User Interfaces
• Evaluation
• Ubiquitous Interaction
Module components
Compulsory area
The following courses are mandatory for this module:
Workload and credit points
Grundlagen der Mensch-Technik-Interaktion (Lecture)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Attendance time | 15 | 2 h | 30 h |
| Preparation/follow-up | 15 | 2 h | 30 h |
| 60 h | |||
Grundlagen der Mensch-Technik-Interaktion (Exercise)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Attendance | 15 | 2 h | 30 h |
| Preparation/follow-up | 15 | 6 h | 90 h |
| 120 h | |||
The workload of the module adds up to 180 hours. The module therefore comprises 6 credit points.
Description of teaching and learning methods
The module Foundations of Human-Technology Interaction is structured around the lecture. The experimental exercise Human-Machine Systems offers students the opportunity to deepen their understanding of the course content and develop their own ideas on various topics.
Requirements for participation and examination
Desirable prerequisites for participation in the courses:
Interest in human-technology interaction and human-centered design
Mandatory requirements for the module examination registration:
This module has no examination requirements.
Completion of the module
| Grading | Graded |
|---|---|
| Exam format | Portfolio examination |
| Type of portfolio examination | 100 points in total |
| Language | German |
Test elements
| Name | Points/Weight | Category | Duration/Extent |
|---|---|---|---|
| Grade on the experimental exercise (term paper on the experimental exercise) | 50 | flexibel | 50 hours |
| Test | 50 | written | 60 min |
Exam description
Portfolio assessment: graded tests and reports from the experimental exercise
Grading scale:
95 or above = 1.0
90 or above = 1.3
85 or above = 1.7
80 or above = 2.0
75 or above = 2.3
70 or above = 2.7
65 or above = 3.0
60 or above = 3.3
55 or above = 3.7
50 or above = 4.0
Below 50 = 5.0
Grading scale:
95 or above = 1.0
90 or above = 1.3
85 or above = 1.7
80 or above = 2.0
75 or above = 2.3
70 or above = 2.7
65 or above = 3.0
60 or above = 3.3
55 or above = 3.7
50 or above = 4.0
Below 50 = 5.0
Duration of the module
The following number of semesters is estimated for taking and completing the module: 1 semester(s).
This module can be started in the following semesters: Winter and summer semester.
Maximum number of participants
The maximum capacity of participants is 40.
Registration procedures
Registration via ISIS required up to one week before the start of lectures. Priority will be given to students who (1) wish to take the course as an elective and (2) are in higher semesters. The division into exercise groups and the introduction to project work will take place during the lecture.
Recommended reading, lecture notes
Lecture notes
unavailable
Electronic lecture notes
unavailable
Recommended literature
- Andreas Butz, Antonio Krüger, Sarah Theres Völkel: Mensch-Maschine-Interaktion. De Gryuter 2022.
- Alan Dix, Janet Finlay, Gregory Abowd, Russell Beale: Human-computer interaction (3rd Ed.). Pearson Education 2004.
- Ben Shneiderman, Maxine Cohen, Steven Jacobs, Catherine Plaisant, Nicholas Diakopoulos, Niklas Elmqvist: Designing the User Interface: Strategies for Effective Human-Computer Interaction (6th Ed.). Pearson USA 2016.
- Yvonne Rogers, Helen Sharp, Jennifer Preece: Interaction Design. Beyond Human-Computer Interaction (6th Edition), John Wiley & Sons 2023.
- Kasper Hornbæk, Per-Ola Kristensson, Antti Oulasvirta: Introduction to Human-Computer Interaction. Oxford University Press 2025.
- Donald Norman: The Design of Everyday Things. Basic Books 2013.
Assigned programs
This module version is used in the following programs:
| Program / program version | Semester(s) | Curriculum component |
|---|---|---|
| Aeronautics and Astronautics StuPO 2018 | SS 2026 | 1. Ingenieurwissenschaftliche Methoden › 1.5 Psychologie und Arbeitswissenschaften |
| WS 2026/27 | 1. Ingenieurwissenschaftliche Methoden › 1.5 Psychologie und Arbeitswissenschaften | |
| Digital Media and Technology Digital Media and Technology (B. Sc.) - StuPO 2015 | SS 2026 | Wahlpflichtbereich › Fachstudium Medientechnik |
| WS 2026/27 | Wahlpflichtbereich › Fachstudium Medientechnik | |
| Industrial Engineering and Management Industrial Engineering and Management (B. Sc.) - StuPO 2015 | SS 2026 | Integrationsbereich › Integrationsbereich (Wahlpflicht) |
| WS 2026/27 | Integrationsbereich › Integrationsbereich (Wahlpflicht) | |
| Industrial Engineering and Management Industrial Engineering and Management (M. Sc.) - StuPO 2015 | SS 2026 | Integrationsbereich/Integration › Integrationsbereich/Integration (Wahlpflicht/Compulsory-Elective) › Systems Engineering & Digitalization |
| WS 2026/27 | Integrationsbereich/Integration › Integrationsbereich/Integration (Wahlpflicht/Compulsory-Elective) › Systems Engineering & Digitalization | |
| Industrial Engineering and Management Industrial Engineering and Management (M. Sc.) - StuPO 2026 | WS 2026/27 | Integration Component › Systems Engineering & Digitalization |
| Language and Communication Language and Communication (M. A.) - PO 2015 | SS 2026 | Wahlpflicht Vertiefung |
| WS 2026/27 | Wahlpflicht Vertiefung | |
| Mechanical Engineering StuPO 2017 | SS 2026 | Wahlpflichtmodule › Schwerpunktmodule › Methodenorientierung › Humanwissenschaftliche Technikgestaltung |
| WS 2026/27 | Wahlpflichtmodule › Schwerpunktmodule › Methodenorientierung › Humanwissenschaftliche Technikgestaltung | |
| Naval Architecture and Ocean Engineering StuPo 2017 | SS 2026 | 2. Profilmodule › 2.1 Systementwurf |
| WS 2026/27 | 2. Profilmodule › 2.1 Systementwurf | |
| Sociology and Technology Studies StuPO 2014 (7. Mai 2014) | SS 2026 | Technisches Fach › Fabrikmanagement › Vertiefungsbereich |
| WS 2026/27 | Technisches Fach › Fabrikmanagement › Vertiefungsbereich | |
| Sprache und Kommunikation StuPO 2025 | WS 2026/27 | Wahlpflichtbereich Vertiefung › Mensch-Maschine-Systeme |
| Technomathematics Technomathematics (M. Sc.) - StuPO 2014 | SS 2026 | Studienrichtungen › Verkehrswesen › Verkehrswesen › Fahrzeugtechnik |
| WS 2026/27 | Studienrichtungen › Verkehrswesen › Verkehrswesen › Fahrzeugtechnik | |
| Transport Systems StuPO 2018 | SS 2026 | A. Grundlagen › 2. Wahlpflichtbereich › 2.4 Sozial- und rechtswissenschaftliche Grundlagen |
| WS 2026/27 | A. Grundlagen › 2. Wahlpflichtbereich › 2.4 Sozial- und rechtswissenschaftliche Grundlagen | |
| Vehicle Engineering StuPO 2017 | SS 2026 | 2. Profilmodule › 2.1 Schienenfahrzeugtechnik |
| WS 2026/27 | 2. Profilmodule › 2.1 Schienenfahrzeugtechnik |
The module is part of the Bachelor's degree programmes in Industrial Engineering, Mechanical Engineering and Transport Engineering. It can also be used in other degree programmes that aim to impart basic knowledge in the field of analysis, evaluation and design of Human-Machine Systems.
Miscellaneous
Not specified