Skip to content
Technische Universität Berlin Deutsch
Course catalog and module transfer system

Principles of Quality ManagementModule description #50346 / Version 9

← Module page Deutsche Fassung
Module / Version#50346 / #9
ValiditySince Winter semester 2026/27
Available language(s)English, German
Credit points6
Person responsible for the moduleJochem, Roland
GradingGraded
Exam formatPortfolio examination
Language(s) of instructionGerman

Affiliation

FacultyFakultät V
InstituteInstitut für Werkzeugmaschinen und Fabrikbetrieb (IWF)
Academic chair35361300 FG Qualitätswissenschaft

Contact

OfficePTZ 3
Contact personMüller-Stein, Lennart Frederik
E-mail addressl.mueller-stein@tu-berlin.de
Websitehttps://www.tu.berlin/qw/studium-lehre/lehrveranstaltungen/gdqm-grundlagen-des-qualitaetsmanagements

Learning outcomes

Upon successful completion of the module, students will have acquired fundamental knowledge of quality management and will be able to apply it independently in problem-solving processes. Their acquired knowledge of quality management tools and methods enables them to pursue systematic and holistic approaches.
Furthermore, students will be able to prepare project results and present and defend them under practice-oriented conditions.

Content

The module provides a comprehensive overview of the key principles, methods, and fields of application of quality management. Starting with an introduction to the topic as well as the historical development and relevant quality awards, the module covers both classic and modern quality management tools. These include Q7, M7, K7, and D7, as well as approaches such as Voice of the Customer, AQL, risk assessment, risk management, MSA, machine and process capability studies, and SPC.

In addition, the module addresses Lean Management, Six Sigma, quality management standards, and audits. It is complemented by practice-oriented exercises, guest lectures from industry, and content on presentation techniques to prepare students for applying and presenting quality-related project results.

Module components

Mandatory component

The following courses are mandatory for this module:

CoursesTypeNumberFrequencyLanguageHours per weekCourse catalog
Grundlagen des QualitätsmanagementsLecture0536 L 310 Winter semester[de]2 ISIS
Grundlagen des QualitätsmanagementsExercise0536 L 312 Winter semester[de]2 ISIS

Courses in the course catalog

Courses created from the teaching units of this module.

Winter semester 2026/27 (2)

Grundlagen des Qualitätsmanagements (Lecture) 1

All groups of this course in the catalog

Grundlagen des Qualitätsmanagements (Exercise) 1

All groups of this course in the catalog

Workload and credit points

Grundlagen des Qualitätsmanagements (Lecture)

Workload descriptionMultiplierHoursTotal
Attendance152 h30 h
Pre-/post-processing154 h60 h
90 h

Grundlagen des Qualitätsmanagements (Exercise)

Workload descriptionMultiplierHoursTotal
Completion of the exercises315 h45 h
Attendance32 h6 h
Pre-/post-processing310 h30 h
81 h

The workload of the module adds up to 171 hours. The module therefore comprises 6 credit points.

Description of teaching and learning methods

The module is divided into a weekly lecture and three exercises.

Requirements for participation and examination

Desirable prerequisites for participation in the courses:

Conversational-level proficiency in German is recommended for the exercises (group work).

Mandatory requirements for the module examination registration:

This module has no examination requirements.

Completion of the module

GradingGraded
Exam formatPortfolio examination
Type of portfolio examination100 points in total
LanguageGerman

Test elements

NamePoints/WeightCategoryDuration/Extent
ISIS quizzes10digital10 quizzes
Presentation30oral20 minutes
Written test60written60 minutes

Exam description

The examination format for this module is a portfolio assessment. For this, the following components with corresponding weightings must be completed:

ISIS quizzes (throughout the semester) - 10 out of 100 points
Group presentation (20 minutes) - 30 out of 100 points
Written test (60 minutes) - 60 out of 100 points

Duration of the module

The following number of semesters is estimated for taking and completing the module: 1 semester(s).

This module can be started in the following semesters: Winter semester.

Maximum number of participants

This module is not limited to a number of students.

Registration procedures

Registration for the entire module is completed via MOSES.

If registration via MOSES is not possible, for example for diploma degree programmes, registration must be completed via the Examination Office within the specified deadline.

Recommended reading, lecture notes

Lecture notes

unavailable

Electronic lecture notes

unavailable

Recommended literature

  • Jochem, R; Mertins, K.; Knothe, T. (Hrsg.): Prozessmanagement - Strategien, Methoden, Umsetzung, Symposium Publishing, Düsseldorf, ISBN 978-3-939707-56-1
  • Jochem, R.: Was kostet Qualität? - Wirtschaftlichkeit von Qualität ermitteln, Hanser Verlag, München, 2010, ISBN 978-3-446-42182-0
  • Kamiske, G. F.; Brauer, J.-P.: Qualitätsmanagement von A bis Z - Erläuterungen moderner Begriffe des Qualitätsmanagements, 4. aktual. und erg. Auflage, Hanser Verlag, München, 2003, ISBN 3-446-22458-0
  • Schmitt, R.; Pfeiffer, T.: Masing Handbuch Qualitätsmanagement, 5., vollst. neu bearb. Aufl., Hanser Verlag, München, 2007, ISBN 978-3-446-40752-7
  • Zollondz, Hans-Dieter: Grundlagen Qualitätsmanagement, 2. Aufl., R. Oldenbourg Verlag, München 2006, ISBN 3-486-57964-9

Assigned programs

This module version is used in the following programs:

Program / program versionSemester(s)Curriculum component
Aeronautics and Astronautics
StuPO 2018
WS 2026/271. Ingenieurwissenschaftliche Methoden › 1.1 Allgemeine und vertiefende ingenieurwissenschaftliche Methoden
Brewing and Beverage Technology
StuPO 2022
WS 2026/27Wahlpflichtmodule › Fachübergreifende Wahlpflicht
Computational Engineering Science (Informationstechnik im Maschinenwesen)
StuPO 2018
WS 2026/276. Schwerpunkte › 6.3 Konstruktion und Fertigung › 6.3.2 Produktionstechnik
Computational Engineering Science (Informationstechnik im Maschinenwesen)
StuPO 2018 (17.01.2018)
WS 2026/274. Profilbereich › 4.2 Profilbereich: Konstruktion und Fertigung › 4.2b Produktionstechnik
Industrial Engineering and Management
Industrial Engineering and Management (B. Sc.) - StuPO 2015
WS 2026/27Integrationsbereich › Integrationsbereich (Wahlpflicht)
Industrial Engineering and Management
Industrial Engineering and Management (M. Sc.) - StuPO 2015
WS 2026/27Integrationsbereich/Integration › Integrationsbereich/Integration (Wahlpflicht/Compulsory-Elective) › Quality Management
Industrial Engineering and Management
Industrial Engineering and Management (M. Sc.) - StuPO 2026
WS 2026/27Integration Component › Quality Management
Mechanical Engineering
StuPO 2017
WS 2026/27Wahlpflichtmodule › Schwerpunktmodule › Methodenorientierung › Produktion und Organisation
Mechanical Engineering
StuPO 2017
WS 2026/27Wahlpflichtmodule › Profilmodule › Produktion
Metals Engineering (teacher training)
Metals Engineering (teacher training) (M. Ed.) - StuPO 2015
WS 2026/27Fachwissenschaftlicher Vertiefungsbereich
Naval Architecture and Ocean Engineering
StuPo 2017
WS 2026/272. Profilmodule › 2.1 Systementwurf
Patent Engineering
StuPO 2015
WS 2026/272.2. Ingenieurwissenschaftliche Profilmodule › 2.2.4. Produktion
Production Engineering
StuPO 2018 (09.05.2018)
WS 2026/274. Profilmodule › 4.3 Produktionsmanagement
Sustainable Management
StuPO 2022
WS 2026/27Compulsory Elective Area › Methods Studies
Technomathematics
Technomathematics (M. Sc.) - StuPO 2014
WS 2026/27Studienrichtungen › Verkehrswesen › Verkehrswesen › Schiffs- und Meerestechnik
Transport Systems
StuPO 2018
WS 2026/27A. Grundlagen › 2. Wahlpflichtbereich › 2.3 Technisch-methodische Grundlagen
Vehicle Engineering
StuPO 2017
WS 2026/272. Profilmodule › 2.3 Ingenieurtechnische Grundlagen und Methoden

Miscellaneous

Not specified