Integrative Product DevelopmentModule description #50364 / Version 5
- 6 CP
- Portfolio examination
- Graded
- Winter and summer semester
- German
| Module / Version | #50364 / #5 |
|---|---|
| Validity | Since Summer semester 2025 |
| Available language(s) | English, German |
| Credit points | 6 |
| Person responsible for the module | Göhlich, Dietmar |
| Grading | Graded |
| Exam format | Portfolio examination |
| Language(s) of instruction | German |
Affiliation
| Faculty | Fakultät V |
|---|---|
| Institute | Institut für Maschinenkonstruktion und Systemtechnik (IMS) |
| Academic chair | 35351100 FG Methoden der Produktentwicklung und Mechatronik (MPM) |
Contact
| Office | H 10 |
|---|---|
| Contact person | Maier, Otto |
| E-mail address | otto.maier@tu-berlin.de |
| Website | https://www.tu.berlin/mpm/studium-lehre/master#c290566 |
Learning outcomes
The goal of this module is to provide a comprehensive understanding of the industrial product development process.
Students acquire fundamental knowledge of the planning and creation of mechanical and mechatronic products, from the initial concept idea through design and development to market entry. The taught methods of product planning and development are practical and applicable across various domains.
By immediately applying lecture content in workshops, students not only gain factual knowledge but also develop the corresponding practical application skills, thereby directly building their ability to take action. This also includes topics such as production-oriented product design and additive manufacturing, which are practically applied in the creation of a functional prototype using 3D printing.
Students acquire fundamental knowledge of the planning and creation of mechanical and mechatronic products, from the initial concept idea through design and development to market entry. The taught methods of product planning and development are practical and applicable across various domains.
By immediately applying lecture content in workshops, students not only gain factual knowledge but also develop the corresponding practical application skills, thereby directly building their ability to take action. This also includes topics such as production-oriented product design and additive manufacturing, which are practically applied in the creation of a functional prototype using 3D printing.
Content
- Strategic Product Planning
- Enhancement of Existing Products (Life Cycle Management)
- Innovation Methods
- Introduction to QFD
- Industrial Product Development Processes (PEP)
- Development Methodologies for Mechanical and Mechatronic Products
- Business Planning and Design to Cost
- CAD and Product Data Management in PEP
- Rapid Prototyping / Additive Manufacturing
- Functional Validation and Virtual Prototypes
- Production-Oriented Product Design
- Variant Management
- Enhancement of Existing Products (Life Cycle Management)
- Innovation Methods
- Introduction to QFD
- Industrial Product Development Processes (PEP)
- Development Methodologies for Mechanical and Mechatronic Products
- Business Planning and Design to Cost
- CAD and Product Data Management in PEP
- Rapid Prototyping / Additive Manufacturing
- Functional Validation and Virtual Prototypes
- Production-Oriented Product Design
- Variant Management
Module components
Compulsory area
The following courses are mandatory for this module:
| Courses | Type | Number | Frequency | Language | Hours per week | Course catalog |
|---|---|---|---|---|---|---|
| Integrative Produktentwicklung | Integrated course | 0535 L 118 | Winter and summer semester | [de] | 4 | ISIS |
Workload and credit points
Integrative Produktentwicklung (Integrated course)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Attendance | 15 | 4 h | 60 h |
| Pre/post processing | 15 | 8 h | 120 h |
| 180 h | |||
The workload of the module adds up to 180 hours. The module therefore comprises 6 credit points.
Description of teaching and learning methods
- Lecture: Teaching of course content
- Exercise: Application of lecture content in workshops
- Assignments: Advanced, independent application of exercise content
- Exercise: Application of lecture content in workshops
- Assignments: Advanced, independent application of exercise content
Requirements for participation and examination
Desirable prerequisites for participation in the courses:
a) obligatorisch: Erfolgreicher Abschluss des Moduls Konstruktion 1/ ingenieurwissenschaftliche Grundlagen
b) wünschenswert: Erfolgreicher Abschluss der Module Konstruktion 2 und Methodisches Konstruieren
b) wünschenswert: Erfolgreicher Abschluss der Module Konstruktion 2 und Methodisches Konstruieren
Mandatory requirements for the module examination registration:
This module has no examination requirements.
Completion of the module
| Grading | Graded |
|---|---|
| Exam format | Portfolio examination |
| Type of portfolio examination | 100 points in total |
| Language | German |
Test elements
| Name | Points/Weight | Category | Duration/Extent |
|---|---|---|---|
| Final presentation and concluding documentation (duration: 20 minutes) | 50 | written | 20 min. |
| Consultation | 20 | oral | 5 min. |
| Intermediate presentation and report | 30 | written | 25 min. |
Exam description
Zu erreichende Gesamtpunktezahl: 100
Notenschlüssel:
95,0 bis 100,0 Punkte ... 1,0
90,0 bis 94,9 Punkte ..... 1,3
85,0 bis 89,9 Punkte ..... 1,7
80,0 bis 84,9 Punkte ..... 2,0
75,0 bis 79,9 Punkte ..... 2,3
70,0 bis 74,9 Punkte ..... 2,7
65,0 bis 69,9 Punkte ..... 3,0
60,0 bis 64,9 Punkte ..... 3,3
55,0 bis 59,9 Punkte ..... 3,7
50,0 bis 54,9 Punkte ..... 4,0
0,0 bis 49,9 Punkte ....... 5,0
Notenschlüssel:
95,0 bis 100,0 Punkte ... 1,0
90,0 bis 94,9 Punkte ..... 1,3
85,0 bis 89,9 Punkte ..... 1,7
80,0 bis 84,9 Punkte ..... 2,0
75,0 bis 79,9 Punkte ..... 2,3
70,0 bis 74,9 Punkte ..... 2,7
65,0 bis 69,9 Punkte ..... 3,0
60,0 bis 64,9 Punkte ..... 3,3
55,0 bis 59,9 Punkte ..... 3,7
50,0 bis 54,9 Punkte ..... 4,0
0,0 bis 49,9 Punkte ....... 5,0
Duration of the module
The following number of semesters is estimated for taking and completing the module: 1 semester(s).
This module can be started in the following semesters: Winter and summer semester.
Maximum number of participants
The maximum capacity of participants is 20.
Registration procedures
Registration for the course: Application via email and a copy of the current enrollment certificate
Further information and registration deadline at:
https://www.tu.berlin/mpm/studium-lehre/master
Further information and registration deadline at:
https://www.tu.berlin/mpm/studium-lehre/master
Recommended reading, lecture notes
Lecture notes
unavailable
Electronic lecture notes
available – https://www.tu.berlin/mpm
Recommended literature
- Andreasen, M.M., Hein L. Integrated Product Development, IPU TU Denmark, 2000
- Clausing, D. Total Quality Development, ASME Press, New York, 1994
- Ehrlenspiel, K.: Integrierte Produktentwicklung - Denkabläufe, Methodeneinsatz, Zusammenarbeit. 4. Aufl., Carl Hanser Verlag, München, 2009
- Gausemeier, J.: Produktinnovation - Strategische Planung und Entwicklung der Produkte von morgen. Carl Hanser Verlag, München, 2001
- Pahl, G.; Beitz, W.: Konstruktionslehre. 7. Aufl., Springer-Verlag, Berlin, 2007
- Savransky, Semyon D. Engineering Creativity: Introduction to TRIZ Methodology of Inventive Problem Solving, CRC Press London, 2000
Assigned programs
This module version is used in the following programs:
| Program / program version | Semester(s) | Curriculum component |
|---|---|---|
| Computational Engineering Science (Informationstechnik im Maschinenwesen) StuPO 2018 (17.01.2018) | SS 2025 | 4. Profilbereich › 4.2 Profilbereich: Konstruktion und Fertigung › 4.2a Konstruktion und Gestaltung |
| WS 2025/26 | 4. Profilbereich › 4.2 Profilbereich: Konstruktion und Fertigung › 4.2a Konstruktion und Gestaltung | |
| SS 2026 | 4. Profilbereich › 4.2 Profilbereich: Konstruktion und Fertigung › 4.2a Konstruktion und Gestaltung | |
| WS 2026/27 | 4. Profilbereich › 4.2 Profilbereich: Konstruktion und Fertigung › 4.2a Konstruktion und Gestaltung | |
| Industrial Engineering and Management Industrial Engineering and Management (M. Sc.) - StuPO 2015 | SS 2025 | Ingenieurwissenschaftliche Studienrichtungen/Engineering Majors › Maschinenbau/Mechanical Engineering (MB) › Maschinenbau/Mechanical Engineering (Wahlpflicht/Compulsory-Elective) › Engineering Design |
| WS 2025/26 | Ingenieurwissenschaftliche Studienrichtungen/Engineering Majors › Maschinenbau/Mechanical Engineering (MB) › Maschinenbau/Mechanical Engineering (Wahlpflicht/Compulsory-Elective) › Engineering Design | |
| SS 2026 | Ingenieurwissenschaftliche Studienrichtungen/Engineering Majors › Maschinenbau/Mechanical Engineering (MB) › Maschinenbau/Mechanical Engineering (Wahlpflicht/Compulsory-Elective) › Engineering Design | |
| WS 2026/27 | Ingenieurwissenschaftliche Studienrichtungen/Engineering Majors › Maschinenbau/Mechanical Engineering (MB) › Maschinenbau/Mechanical Engineering (Wahlpflicht/Compulsory-Elective) › Engineering Design | |
| Industrial Engineering and Management Industrial Engineering and Management (M. Sc.) - StuPO 2026 | WS 2026/27 | Engineering Sciences / Specialization › Mechanical Engineering › Mechanical Engineering (Compulsory Electives) › Engineering Design |
| Mechanical Engineering StuPO 2017 | WS 2025/26 | Wahlpflichtmodule › Kernmodule › Konstruktion und Entwicklung |
| SS 2026 | Wahlpflichtmodule › Kernmodule › Konstruktion und Entwicklung | |
| WS 2026/27 | Wahlpflichtmodule › Kernmodule › Konstruktion und Entwicklung | |
| Patent Engineering StuPO 2015 | WS 2025/26 | 2.1. Ingenieurwissenschaftliche Kernmodule › 2.1.1. Konstruktion und Entwicklung |
| SS 2026 | 2.1. Ingenieurwissenschaftliche Kernmodule › 2.1.1. Konstruktion und Entwicklung | |
| WS 2026/27 | 2.1. Ingenieurwissenschaftliche Kernmodule › 2.1.1. Konstruktion und Entwicklung | |
| Technomathematics Technomathematics (M. Sc.) - StuPO 2014 | SS 2025 | Studienrichtungen › Maschinenbau › Maschinenbau › Kernmodule |
| WS 2025/26 | Studienrichtungen › Maschinenbau › Maschinenbau › Kernmodule | |
| SS 2026 | Studienrichtungen › Maschinenbau › Maschinenbau › Kernmodule | |
| WS 2026/27 | Studienrichtungen › Maschinenbau › Maschinenbau › Kernmodule |
Die Betrachtung und der Einsatz domänenunabhängiger Methoden macht das Modul für alle technischen Studiengänge interessant.
Insbesondere Studierende mit dem Berufsziel Konstruktion und Entwicklung werden profitieren Die vermittelten Methoden der Produktplanung und Entwicklung sind praxisgerecht und domänenübergreifend einsetzbar.
Insbesondere Studierende mit dem Berufsziel Konstruktion und Entwicklung werden profitieren Die vermittelten Methoden der Produktplanung und Entwicklung sind praxisgerecht und domänenübergreifend einsetzbar.
Miscellaneous
Aktuelle Informationen zur Lehrveranstaltung unter: http://www.mpm.tu-berlin.de/menue/studium_und_lehre/master/integrative_produktentwicklung/