Application of MATLAB/Simulink in Vehicle DynamicsModule description #50426 / Version 10
- 6 CP
- Written exam
- Graded
- Winter and summer semester
- German
This module description is not valid in the current semester (Winter semester 2026/27).
Current version (v11)
| Module / Version | #50426 / #10 |
|---|---|
| Validity | Winter semester 2025/26 – Winter semester 2025/26 |
| Available language(s) | English, German |
| Credit points | 6 |
| Person responsible for the module | Müller, Steffen |
| Grading | Graded |
| Exam format | Written exam |
| Language(s) of instruction | German |
Affiliation
| Faculty | Fakultät V |
|---|---|
| Institute | Institut für Land- und Seeverkehr |
| Academic chair | 35334100 FG Fahrerverhaltensbeobachtung für energetische Optimierung und Unfallvermeidung |
Contact
| Office | TIB 13 |
|---|---|
| Contact person | Meincke, Marie |
| E-mail address | marie.meincke@tu-berlin.de |
| Website | https://www.tu.berlin/kfz/studium-lehre/lehrangebote/modulliste-bachelor/matlab-simulink-an-beispielen-aus-der-fahrzeugdynamik |
Learning outcomes
Attending this course enables students to work confidently with MATLAB/Simulink. In addition, students will be able to apply MATLAB/Simulink to vehicle dynamics problems and independently transfer the skills they have acquired to other areas.
Content
During the block course, 5 subject areas will be covered:
MATLAB basics:
Introduction to MATLAB, basics of programming, import/export/processing of data
Simulink basics:
Introduction to Simulink and the basics of numerical simulation methods using examples of longitudinal dynamics
Fundamentals of signal processing:
Introduction to the preparation and processing of sensor signals using examples of real vehicle measurements
Fundamentals of Systems Theory I:
Introduction to system theory using examples of lateral dynamics
Fundamentals of systems theory II:
Introduction to system theory using examples of vertical dynamics
MATLAB basics:
Introduction to MATLAB, basics of programming, import/export/processing of data
Simulink basics:
Introduction to Simulink and the basics of numerical simulation methods using examples of longitudinal dynamics
Fundamentals of signal processing:
Introduction to the preparation and processing of sensor signals using examples of real vehicle measurements
Fundamentals of Systems Theory I:
Introduction to system theory using examples of lateral dynamics
Fundamentals of systems theory II:
Introduction to system theory using examples of vertical dynamics
Module components
Compulsory area
The following courses are mandatory for this module:
| Courses | Type | Number | Frequency | Language | Hours per week | Course catalog |
|---|---|---|---|---|---|---|
| Matlab/Simulink an Beispielen aus der Fahrzeugdynamik | Integrated course | 3533 L 669 | Winter and summer semester | [de] | 4 | WS 2026/27 (1) ISIS |
Courses in the course catalog
Courses created from the teaching units of this module.
Winter semester 2026/27 (1)
Matlab/Simulink an Beispielen aus der Fahrzeugdynamik (Integrated course) 1
- Matlab/Simulink an Beispielen aus der Fahrzeugdynamik (Integrierte Veranstaltung) Blockveranstaltung Mo. 15.- Fr. 19.02.2027, 10-16 Uhr 3533 L 669
Workload and credit points
Matlab/Simulink an Beispielen aus der Fahrzeugdynamik (Integrated course)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Attendance time | 5 | 5 h | 25 h |
| Preparation for the final examination and processing the exercises | 1 | 140 h | 140 h |
| Preparation and follow-up | 5 | 3 h | 15 h |
| 180 h | |||
The workload of the module adds up to 180 hours. The module therefore comprises 6 credit points.
Description of teaching and learning methods
The block courses consist of lectures and exercises; in addition: online support via ISIS, consultation hours. The voluntary exercises for exam preparation can be completed on site in the PC-Pool of the chair for automotive engineering.
Requirements for participation and examination
Desirable prerequisites for participation in the courses:
All participants are required to have the qualifications acquired by successfully attending the course ‘Grundlagen der Fahrzeugdynamik’ at TU Berlin. In addition, basic programming skills are desirable.
Mandatory requirements for the module examination registration:
This module has no examination requirements.
Completion of the module
| Grading | Graded |
|---|---|
| Exam format | Written exam |
| Language | German |
| Duration/Extent | 90 min. examination on the computer |
Exam description
Final examination on the computer in the PC-Pool
Duration: 90 minutes
Written examination in ISIS with a practical component in Matlab/Simulink
Exercises are provided to prepare for the exam, which can be completed on a voluntary basis and handed in for checking.
Duration: 90 minutes
Written examination in ISIS with a practical component in Matlab/Simulink
Exercises are provided to prepare for the exam, which can be completed on a voluntary basis and handed in for checking.
Duration of the module
The following number of semesters is estimated for taking and completing the module: 1 semester(s).
This module can be started in the following semesters: Winter and summer semester.
Maximum number of participants
The maximum capacity of participants is 28.
Registration procedures
Registration for the examination: specific to the degree programme; in the Bachelor's degree programme in Verkehrswesen usually via Moses. Registration takes place within a registration period, which is announced in the first session.
The course takes place in the form of a block event.
Due to the limited number of participants, prior registration on ISIS is required. If more than 28 people register, places will be allocated according to a procedure determined by the TU. The course is primarily aimed at students on the Bachelor's degree programme in Verkehrswesen. If there is sufficient capacity, Master's students will also be accepted.
The registration deadlines and the access data for ISIS are announced in the course catalogue and on the chair's homepage (https://www.kfz.tu-berlin.de/menue/home/).
The course takes place in the form of a block event.
Due to the limited number of participants, prior registration on ISIS is required. If more than 28 people register, places will be allocated according to a procedure determined by the TU. The course is primarily aimed at students on the Bachelor's degree programme in Verkehrswesen. If there is sufficient capacity, Master's students will also be accepted.
The registration deadlines and the access data for ISIS are announced in the course catalogue and on the chair's homepage (https://www.kfz.tu-berlin.de/menue/home/).
Recommended reading, lecture notes
Lecture notes
unavailable
Electronic lecture notes
available – Alle Vorlesungsunterlagen werden in ISIS zur Verfügung gestellt.
Recommended literature
No recommended literature given
Assigned programs
This module version is used in the following programs:
| Program / program version | Semester(s) | Curriculum component |
|---|---|---|
| Automotive Engineering (teacher training) Kernfach StuPO 2016 | WS 2025/26 | Fachwissenschaftlicher Vertiefungsbereich |
| Automotive Engineering (teacher training) Automotive Engineering (teacher training) (B. Sc.) - Kernfach StuPO 2020 | WS 2025/26 | Wahlpflichtbereich › Fachwissenschaftlicher Wahlpflichtbereich |
| Automotive Engineering (teacher training) Zweitfach StuPO 2016 | WS 2025/26 | Fachwissenschaftlicher Vertiefungsbereich |
| Automotive Engineering (teacher training) Automotive Engineering (teacher training) (B. Sc.) - Zweitfach StuPO 2020 | WS 2025/26 | Wahlpflichtbereich › Fachwissenschaftlicher Wahlpflichtbereich |
| Technomathematics Technomathematics (B. Sc.) - StuPO 2014 | WS 2025/26 | Studienrichtungen › Technisches Gebiet - Verkehrswesen › Studienrichtung › Fahrzeugtechnik |
| Transport Systems StuPO 2018 | WS 2025/26 | B. Studienrichtungen › Fahrzeugtechnik › 4. Vertiefungs- und Anwendungsbereich |
| Vehicle Engineering StuPO 2017 | WS 2025/26 | 2. Profilmodule › 2.3 Ingenieurtechnische Grundlagen und Methoden |
Graduates gain basic insights into working with MATLAB/Simulink and can apply the knowledge they have acquired to various vehicle dynamics problems. Since the students work with comparatively simple models that they set up and programme themselves, it is also possible to apply the acquired knowledge to other areas afterwards. The course serves as preparation for a number of courses on the Master's degree programme in Automotive Engineering.
Miscellaneous
The module is only offered as a block course!