Assembly Technology for Industry 4.0Module description #50457 / Version 12
- 6 CP
- Portfolio examination
- Graded
- Winter and summer semester
- German
| Module / Version | #50457 / #12 |
|---|---|
| Validity | Since Winter semester 2026/27 |
| Available language(s) | English, German |
| Credit points | 6 |
| Person responsible for the module | Dietrich, Franz |
| Grading | Graded |
| Exam format | Portfolio examination |
| Language(s) of instruction | German |
Affiliation
| Faculty | Fakultät V |
|---|---|
| Institute | Institut für Werkzeugmaschinen und Fabrikbetrieb (IWF) |
| Academic chair | 35361200 FG Handhabungs- und Montagetechnik |
Contact
| Office | PTZ 2 |
|---|---|
| Contact person | Siegemund, Georg |
| E-mail address | g.siegemund@tu-berlin.de |
| Website | https://www.tu.berlin/hamster/studium/module-lehrveranstaltungen/montagetechnik-fuer-die-industrie-40/ |
Learning outcomes
In this course, students acquire engineering-specific competencies in assembly technology in connection with the value-creation factors product, process, equipment, organization, and human factors. Using the methods and tools taught in the course, students are able to develop and apply different solution approaches to engineering problems. These include product design for efficient forward and reverse assembly as well as the application of Industry 4.0 technologies for the design and development of variant-flexible products and flexible processes. Furthermore, through the Industry 4.0 perspective, students are enabled to identify the advantages and disadvantages of these new technologies and to integrate them efficiently and sustainably into product design and process automation.
Through various case studies in the interactive lecture sessions, students learn how to familiarize themselves with new projects within a short period of time and to develop and present solution approaches and results using appropriate methods and tools. The acquired presentation skills and interdisciplinary collaboration abilities enable students to independently and effectively apply their knowledge to complex practical challenges, both individually and as part of a team.
Finally, students are capable of developing assembly systems and carrying out assembly planning while considering given requirements and boundary conditions.
Through various case studies in the interactive lecture sessions, students learn how to familiarize themselves with new projects within a short period of time and to develop and present solution approaches and results using appropriate methods and tools. The acquired presentation skills and interdisciplinary collaboration abilities enable students to independently and effectively apply their knowledge to complex practical challenges, both individually and as part of a team.
Finally, students are capable of developing assembly systems and carrying out assembly planning while considering given requirements and boundary conditions.
Content
Key topics of assembly technology in the context of Industry 4.0 are taught in depth with a focus on:
• Product design (including design for assembly and disassembly),
• Digital twins and big data in the context of assembly,
• Processes (including joining and handling technologies),
• Condition monitoring and predictive maintenance,
• Equipment and machinery (including robots, gripping and clamping systems, conveyor and transport systems, handling systems, and sensor technology),
• Augmented reality and virtual reality in assembly systems,
• Organization and human factors,
• Various assembly systems.
In addition, process management and monitoring are covered within these focus areas, including inspection, control, and regulation as well as the maintenance and evaluation of processes aimed at increasing the productivity, efficiency, and flexibility of assembly systems.
With regard to sustainable production, the course addresses material cycles, assembly and disassembly processes, and topics related to the early phases of the product development process with the objective of designing assembly-oriented products and processes. Approaches essential for disassembly and reassembly in the context of product and component reuse and remanufacturing are also presented.
Project-oriented exercise:
Within the project-oriented exercise, students collaboratively work on relevant research topics in discipline-specific projects together with fellow students.
Typically, four to six students from different degree programs form an interdisciplinary and international project group. The project group is supervised by the academic staff of the department, while the students themselves are responsible for planning and carrying out the project tasks.
Examples of innovative research topics include handling and assembly processes, Industry 4.0 solutions in production, factory and assembly planning, as well as artificial intelligence in assembly technology.
Participation requires fundamental engineering knowledge and the willingness to acquire new skills and knowledge.
The project-oriented exercise consists of the following assessment components:
1. Development and presentation of the project schedule,
2. Presentation of interim results,
3. Presentation of final project results,
4. Preparation of a final project report.
Further details can be found on the department website, the ISIS course page, and during the semester kick-off event.
• Product design (including design for assembly and disassembly),
• Digital twins and big data in the context of assembly,
• Processes (including joining and handling technologies),
• Condition monitoring and predictive maintenance,
• Equipment and machinery (including robots, gripping and clamping systems, conveyor and transport systems, handling systems, and sensor technology),
• Augmented reality and virtual reality in assembly systems,
• Organization and human factors,
• Various assembly systems.
In addition, process management and monitoring are covered within these focus areas, including inspection, control, and regulation as well as the maintenance and evaluation of processes aimed at increasing the productivity, efficiency, and flexibility of assembly systems.
With regard to sustainable production, the course addresses material cycles, assembly and disassembly processes, and topics related to the early phases of the product development process with the objective of designing assembly-oriented products and processes. Approaches essential for disassembly and reassembly in the context of product and component reuse and remanufacturing are also presented.
Project-oriented exercise:
Within the project-oriented exercise, students collaboratively work on relevant research topics in discipline-specific projects together with fellow students.
Typically, four to six students from different degree programs form an interdisciplinary and international project group. The project group is supervised by the academic staff of the department, while the students themselves are responsible for planning and carrying out the project tasks.
Examples of innovative research topics include handling and assembly processes, Industry 4.0 solutions in production, factory and assembly planning, as well as artificial intelligence in assembly technology.
Participation requires fundamental engineering knowledge and the willingness to acquire new skills and knowledge.
The project-oriented exercise consists of the following assessment components:
1. Development and presentation of the project schedule,
2. Presentation of interim results,
3. Presentation of final project results,
4. Preparation of a final project report.
Further details can be found on the department website, the ISIS course page, and during the semester kick-off event.
Module components
Compulsory area
The following courses are mandatory for this module:
| Courses | Type | Number | Frequency | Language | Hours per week | Course catalog |
|---|---|---|---|---|---|---|
| Montagetechnik für die Industrie 4.0 | Lecture | 3536 L 212 | Winter semester | [de] | 2 | WS 2026/27 (1) ISIS |
Compulsory elective area
A selection of the following courses must be completed:
Courses in the course catalog
Courses created from the teaching units of this module.
Winter semester 2026/27 (1)
Montagetechnik für die Industrie 4.0 (Lecture) 1
- Montagetechnik für die Industrie 4.0 (Vorlesung) 1. Termingruppe 3536 L 212
Workload and credit points
Montagetechnik für die Industrie 4.0 (Lecture)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Attendance | 15 | 2 h | 30 h |
| Pre/post processing | 15 | 2 h | 30 h |
| 60 h | |||
Montagetechnik BSc / 4 LP (Project)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Attendance | 15 | 4 h | 60 h |
| Pre/post processing | 15 | 4 h | 60 h |
| 120 h | |||
Montagetechnik MSc / 4 LP (Project)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Attendance | 15 | 4 h | 60 h |
| Pre/post processing | 15 | 4 h | 60 h |
| 120 h | |||
The workload of the module adds up to 300 hours. The module therefore comprises 6 credit points.
Description of teaching and learning methods
Lecture (VL): Core topics of assembly technology are taught with consideration of the aspects product, process, equipment, organization, and human factors. The presentation and discussion of case studies serve to deepen understanding and illustrate complex issues.
Project exercises (PJ): Following an introduction to methods and tools for the planning and operation of assembly systems, these methods are applied in small groups through project-oriented work. Students practice analyzing relevant interrelationships, breaking down complex problems into manageable tasks, specifying tasks in a comprehensible manner, documenting results, and presenting their findings. Tasks are completed through both individual and group work.
Project exercises (PJ): Following an introduction to methods and tools for the planning and operation of assembly systems, these methods are applied in small groups through project-oriented work. Students practice analyzing relevant interrelationships, breaking down complex problems into manageable tasks, specifying tasks in a comprehensible manner, documenting results, and presenting their findings. Tasks are completed through both individual and group work.
Requirements for participation and examination
Desirable prerequisites for participation in the courses:
Knowledge of production engineering and basic skills in CAD-based design are recommended. Very good German language skills are essential for the project work. Alternatively, English-language projects may be selected, for which very good English language skills are essential.
Mandatory requirements for the module examination registration:
This module has no examination requirements.
Completion of the module
| Grading | Graded |
|---|---|
| Exam format | Portfolio examination |
| Type of portfolio examination | 100 points in total |
| Language | German |
Test elements
| Name | Points/Weight | Category | Duration/Extent |
|---|---|---|---|
| Exam Assembly Technology for Industry 4.0 | 33 | written | 45 minutes |
| Documented practical performance assessment: project-oriented exercise in assembly technology / 4 ECTS credits | 67 | flexibel | about 15 pages report, about 25 minutes presentation |
Exam description
Total number of points to be achieved: 100
- from 95.0 points ………………………….. Grade 1.0
- from 90.0 up to less than 95.0 points … Grade 1.3
- from 85.0 up to less than 90.0 points … Grade 1.7
- from 80.0 up to less than 85.0 points … Grade 2.0
- from 75.0 up to less than 80.0 points … Grade 2.3
- from 70.0 up to less than 75.0 points … Grade 2.7
- from 65.0 up to less than 70.0 points … Grade 3.0
- from 60.0 up to less than 65.0 points … Grade 3.3
- from 55.0 up to less than 60.0 points … Grade 3.7
- from 50.0 up to less than 55.0 points … Grade 4.0
- less than 50.0 points ……………………. Grade 5.0
- from 95.0 points ………………………….. Grade 1.0
- from 90.0 up to less than 95.0 points … Grade 1.3
- from 85.0 up to less than 90.0 points … Grade 1.7
- from 80.0 up to less than 85.0 points … Grade 2.0
- from 75.0 up to less than 80.0 points … Grade 2.3
- from 70.0 up to less than 75.0 points … Grade 2.7
- from 65.0 up to less than 70.0 points … Grade 3.0
- from 60.0 up to less than 65.0 points … Grade 3.3
- from 55.0 up to less than 60.0 points … Grade 3.7
- from 50.0 up to less than 55.0 points … Grade 4.0
- less than 50.0 points ……………………. Grade 5.0
Duration of the module
The following number of semesters is estimated for taking and completing the module: 1 semester(s).
This module can be started in the following semesters: Winter and summer semester.
Maximum number of participants
This module is not limited to a number of students.
Registration procedures
Registration for the lecture via ISIS is required. The registration link can be found via the following link: www.tu.berlin/hamster/. Registration for the module itself must be completed via QISPOS. The registration procedure for the project work will be announced during the first lecture.
Recommended reading, lecture notes
Lecture notes
unavailable
Electronic lecture notes
available – The lecture notes will be made available on ISIS.
Recommended literature
- Feldmann: Handbuch Fügen, Handhaben, Montieren
- Lotter: Montage in der industriellen Produktion : Ein Handbuch für die Praxis
Assigned programs
This module version is used in the following programs:
| Program / program version | Semester(s) | Curriculum component |
|---|---|---|
| Computational Engineering Science (Informationstechnik im Maschinenwesen) StuPO 2018 | WS 2026/27 | 6. Schwerpunkte › 6.3 Konstruktion und Fertigung › 6.3.2 Produktionstechnik |
| Computational Engineering Science (Informationstechnik im Maschinenwesen) StuPO 2018 (17.01.2018) | WS 2026/27 | 4. Profilbereich › 4.2 Profilbereich: Konstruktion und Fertigung › 4.2b Produktionstechnik |
| Industrial Engineering and Management Industrial Engineering and Management (M. Sc.) - StuPO 2015 | WS 2026/27 | Ingenieurwissenschaftliche Studienrichtungen/Engineering Majors › Maschinenbau/Mechanical Engineering (MB) › Maschinenbau/Mechanical Engineering (Wahlpflicht/Compulsory-Elective) › Production Technology and Factory Management |
| Industrial Engineering and Management Industrial Engineering and Management (M. Sc.) - StuPO 2026 | WS 2026/27 | Engineering Sciences / Specialization › Mechanical Engineering › Mechanical Engineering (Compulsory Electives) › Cyber-Physical-Production-Systems |
| Mechanical Engineering StuPO 2017 | WS 2026/27 | Wahlpflichtmodule › Schwerpunktmodule › Produktorientierung › Produktionstechnik |
| Mechanical Engineering StuPO 2017 | WS 2026/27 | Wahlpflichtmodule › Profilmodule › Produktion |
| Patent Engineering StuPO 2015 | WS 2026/27 | 2.1. Ingenieurwissenschaftliche Kernmodule › 2.1.7. Werkzeugmaschinen und Anlagentechnik |
| Production Engineering StuPO 2018 (09.05.2018) | WS 2026/27 | 4. Profilmodule › 4.2 Automatisierungs- und Informationstechnik |
| Sociology and Technology Studies StuPO 2014 (7. Mai 2014) | WS 2026/27 | Technisches Fach › Fabrikmanagement › Vertiefungsbereich |
| Technomathematics Technomathematics (M. Sc.) - StuPO 2014 | WS 2026/27 | Studienrichtungen › Maschinenbau › Maschinenbau › Profilmodule |
The module is intended for students of production engineering, mechanical engineering, industrial engineering and management, transportation engineering, information technology in mechanical engineering, and other technical degree programs.
Miscellaneous
Further information can be found at the HAMSTER website www.tu.berlin/hamster/.
References to further literature will be provided during the courses.
References to further literature will be provided during the courses.