Pressing Technology and ManagementModule description #50488 / Version 3
- 6 CP
- Oral exam
- Graded
- Winter and summer semester
- German
This module description is not valid in the current semester (Winter semester 2026/27).
| Module / Version | #50488 / #3 |
|---|---|
| Validity | Summer semester 2025 – Summer semester 2026 |
| Available language(s) | English, German |
| Credit points | 6 |
| Person responsible for the module | Bold, Jörg |
| Grading | Graded |
| Exam format | Oral exam |
| Language(s) of instruction | German |
Affiliation
| Faculty | Fakultät V |
|---|---|
| Institute | Institut für Werkzeugmaschinen und Fabrikbetrieb (IWF) |
| Academic chair | 35361100 FG Werkzeugmaschinen und Fertigungstechnik |
Contact
| Office | PTZ 1 |
|---|---|
| Contact person | Bold, Jörg |
| E-mail address | bold@iwf.tu-berlin.de |
| Website | Not specified |
Learning outcomes
The two-semester module ‘Pressing Technology and Management’ consists of 2 sub-modules. Part 1: Sheet metal forming technology (summer semester) and part 2: Management of pressing plants.
Students gain an overview of the fundamentals of the forming manufacturing process, sheet metal forming, the press production system and management in a press shop. In addition to conventional and the latest methods of sheet metal forming, knowledge of process planning and implementation, conventional presses and the latest servo presses, tool design and the sustainable economic operation of press shops and digitalisation in press shops can be acquired.
Students gain an overview of the fundamentals of the forming manufacturing process, sheet metal forming, the press production system and management in a press shop. In addition to conventional and the latest methods of sheet metal forming, knowledge of process planning and implementation, conventional presses and the latest servo presses, tool design and the sustainable economic operation of press shops and digitalisation in press shops can be acquired.
Content
The course imparts knowledge in the following areas:
- Theoretical fundamentals of forming (fundamentals required to understand the processes in a press shop, such as metallurgical fundamentals, plastomechanical fundamentals, flow conditions, test methods for sheet metal, forming capacity, anisotropy, tribology of sheet metal forming)
- Sheet metal forming processes (e.g. stretch forming, deep drawing, bending forming and innovative processes for lightweight construction such as press hardening and hydroforming)
- Cutting processes in sheet metal forming (e.g. shear cutting, water jet cutting, laser cutting)
- Press systems - structure, function, assemblies, control, automation, digitalisation of presses and forming systems in press shops
- Design and development of tools
- Press plant management with planning and organisation of press plants, personnel deployment, profitability control, control and Industry 4.0 in press plants
- Theoretical fundamentals of forming (fundamentals required to understand the processes in a press shop, such as metallurgical fundamentals, plastomechanical fundamentals, flow conditions, test methods for sheet metal, forming capacity, anisotropy, tribology of sheet metal forming)
- Sheet metal forming processes (e.g. stretch forming, deep drawing, bending forming and innovative processes for lightweight construction such as press hardening and hydroforming)
- Cutting processes in sheet metal forming (e.g. shear cutting, water jet cutting, laser cutting)
- Press systems - structure, function, assemblies, control, automation, digitalisation of presses and forming systems in press shops
- Design and development of tools
- Press plant management with planning and organisation of press plants, personnel deployment, profitability control, control and Industry 4.0 in press plants
Module components
Compulsory area
The following courses are mandatory for this module:
Workload and credit points
Management von Presswerken (Lecture)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Attendance time | 15 | 2 h | 30 h |
| Preparation/follow-up | 15 | 4 h | 60 h |
| 90 h | |||
Technologie der Blechumformung (Lecture)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Attendance time | 15 | 2 h | 30 h |
| Preparation/follow-up | 15 | 4 h | 60 h |
| 90 h | |||
The workload of the module adds up to 180 hours. The module therefore comprises 6 credit points.
Description of teaching and learning methods
The two-semester module takes place online. The lecturer presents the basic teaching content in lecture form. In a very personal atmosphere, students can enter into close academic contact with the lecturer in order to discuss advanced questions.
Students receive a handout and are encouraged to independently record in-depth content. There is sufficient time to discuss questions in the wider field of forming technology.
Students receive a handout and are encouraged to independently record in-depth content. There is sufficient time to discuss questions in the wider field of forming technology.
Requirements for participation and examination
Desirable prerequisites for participation in the courses:
Basic interest in manufacturing technology, especially sheet metal part production.
Mandatory requirements for the module examination registration:
This module has no examination requirements.
Completion of the module
| Grading | Graded |
|---|---|
| Exam format | Oral exam |
| Language | German |
| Duration/Extent | 60 minutes |
Exam description
Oral exam
Duration of the module
The following number of semesters is estimated for taking and completing the module: 2 semester(s).
This module can be started in the following semesters: Winter and summer semester.
Maximum number of participants
The maximum capacity of participants is 20.
Registration procedures
Registration for the module is done via ISIS.
Recommended reading, lecture notes
Lecture notes
available
Electronic lecture notes
unavailable
Recommended literature
No recommended literature given
Assigned programs
This module version is used in the following programs:
| Program / program version | Semester(s) | Curriculum component |
|---|---|---|
| Mechanical Engineering StuPO 2017 | SS 2025 | Wahlpflichtmodule › Profilmodule › Produktion |
| WS 2025/26 | Wahlpflichtmodule › Profilmodule › Produktion | |
| SS 2026 | Wahlpflichtmodule › Profilmodule › Produktion | |
| Patent Engineering StuPO 2015 | SS 2025 | 2.2. Ingenieurwissenschaftliche Profilmodule › 2.2.4. Produktion |
| WS 2025/26 | 2.2. Ingenieurwissenschaftliche Profilmodule › 2.2.4. Produktion | |
| SS 2026 | 2.2. Ingenieurwissenschaftliche Profilmodule › 2.2.4. Produktion | |
| Production Engineering StuPO 2018 (09.05.2018) | SS 2025 | 4. Profilmodule › 4.3 Produktionsmanagement |
| WS 2025/26 | 4. Profilmodule › 4.1 Produktionstechnologie | |
| SS 2026 | 4. Profilmodule › 4.1 Produktionstechnologie | |
| Technomathematics Technomathematics (M. Sc.) - StuPO 2014 | SS 2025 | Studienrichtungen › Maschinenbau › Maschinenbau › Profilmodule |
| WS 2025/26 | Studienrichtungen › Maschinenbau › Maschinenbau › Profilmodule | |
| SS 2026 | Studienrichtungen › Maschinenbau › Maschinenbau › Profilmodule |
The module can be taken as an elective by students on the Master's degree programme in Mechanical Engineering - Specialisation in Production Technology. The module is also open to all other students.
Miscellaneous
Not specified