Laboratory for ProductionTechnologyModule description #50495 / Version 6
- 6 CP
- Portfolio examination
- Graded
- Winter and summer semester
- German
| Module / Version | #50495 / #6 |
|---|---|
| Validity | Since Summer semester 2025 |
| Available language(s) | English, German |
| Credit points | 6 |
| Person responsible for the module | Bold, Jörg |
| Grading | Graded |
| Exam format | Portfolio examination |
| Language(s) of instruction | German |
Affiliation
| Faculty | Fakultät V |
|---|---|
| Institute | Institut für Werkzeugmaschinen und Fabrikbetrieb (IWF) |
| Academic chair | 35361100 FG Werkzeugmaschinen und Fertigungstechnik |
Contact
| Office | PTZ 1 |
|---|---|
| Contact person | Bold, Jörg |
| E-mail address | bold@iwf.tu-berlin.de |
| Website | Not specified |
Learning outcomes
The ‘Production Engineering Laboratory’ module is used for the practical implementation of the content of the Bachelor's lectures ‘Production Engineering’, ‘Machine Tool Processing System’ and ‘Introduction to Production Engineering’. In the project, current problem areas from the field of production engineering are analysed and discussed and experimental solutions are developed in close cooperation with the research assistants. The aim of the practical course is to gain general knowledge of the analytical and experimental approach to scientific issues.
Content
Current issues in production engineering are discussed together with the students. In small groups or individual presentations, students are asked to analyse the issues. Experimental approaches are then developed together with the research assistants and realised within the scope of the possibilities.
Module components
Compulsory area
The following courses are mandatory for this module:
| Courses | Type | Number | Frequency | Language | Hours per week | Course catalog |
|---|---|---|---|---|---|---|
| Produktionstechnisches Labor | Project | 0536 L 010 | Winter and summer semester | [de] | 4 | ISIS |
Workload and credit points
Produktionstechnisches Labor (Project)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Time in attendance | 15 | 4 h | 60 h |
| Preparation/follow-up | 15 | 8 h | 120 h |
| 180 h | |||
The workload of the module adds up to 180 hours. The module therefore comprises 6 credit points.
Description of teaching and learning methods
Approximately 30% of the project time is used for knowledge transfer in the form of presentations by the seminar leaders; approximately 30% of the project time is used for presentations by the students and for moderated team discussions. The students work independently on the experiments for around 20% of the project time.
Requirements for participation and examination
Desirable prerequisites for participation in the courses:
a) Completion of the Production Engineering module
b) Completion of the Machine Tool Processing System module
b) Completion of the Machine Tool Processing System module
Mandatory requirements for the module examination registration:
This module has no examination requirements.
Completion of the module
| Grading | Graded |
|---|---|
| Exam format | Portfolio examination |
| Type of portfolio examination | 100 points in total |
| Language | German |
Test elements
| Name | Points/Weight | Category | Duration/Extent |
|---|---|---|---|
| Short presentation | 20 | flexibel | 10 slides |
| Collaboration | 10 | flexibel | steady |
| Project report | 70 | written | 10 slides |
Exam description
The portfolio examination consists of the elements participation, short presentation and project report.
The module is assessed according to the following grading scale:
95.0 to 100.0 points ... 1,0
90.0 to 94.9 points ..... 1.3
85.0 to 89.9 points ..... 1.7
80.0 to 84.9 points ..... 2.0
75.0 to 79.9 points ..... 2.3
70.0 to 74.9 points ..... 2.7
65.0 to 69.9 points ..... 3.0
60.0 to 64.9 points ..... 3.3
55.0 to 59.9 points ..... 3.7
50.0 to 54.9 points ..... 4.0
0.0 to 49.9 points ....... 5.0
The module is assessed according to the following grading scale:
95.0 to 100.0 points ... 1,0
90.0 to 94.9 points ..... 1.3
85.0 to 89.9 points ..... 1.7
80.0 to 84.9 points ..... 2.0
75.0 to 79.9 points ..... 2.3
70.0 to 74.9 points ..... 2.7
65.0 to 69.9 points ..... 3.0
60.0 to 64.9 points ..... 3.3
55.0 to 59.9 points ..... 3.7
50.0 to 54.9 points ..... 4.0
0.0 to 49.9 points ....... 5.0
Duration of the module
The following number of semesters is estimated for taking and completing the module: 1 semester(s).
This module can be started in the following semesters: Winter and summer semester.
Maximum number of participants
The maximum capacity of participants is 10.
Registration procedures
Please register for the event via ISIS.
Recommended reading, lecture notes
Lecture notes
available
Electronic lecture notes
unavailable
Recommended literature
No recommended literature given
Assigned programs
This module version is used in the following programs:
| Program / program version | Semester(s) | Curriculum component |
|---|---|---|
| Computational Engineering Science (Informationstechnik im Maschinenwesen) StuPO 2018 | SS 2025 | 7. Projekt |
| WS 2025/26 | 7. Projekt | |
| SS 2026 | 7. Projekt | |
| WS 2026/27 | 7. Projekt | |
| Mechanical Engineering StuPO 2017 | SS 2025 | Wahlpflichtmodule › Project |
| WS 2025/26 | Wahlpflichtmodule › Project | |
| SS 2026 | Wahlpflichtmodule › Project | |
| WS 2026/27 | Wahlpflichtmodule › Project | |
| Metals Engineering (teacher training) Metals Engineering (teacher training) (B. Sc.) - StuPO 2015 | WS 2025/26 | Fachwissenschaft › Pflichtbereich |
| SS 2026 | Fachwissenschaft › Pflichtbereich | |
| WS 2026/27 | Fachwissenschaft › Pflichtbereich |
Compulsory elective module in the fundamentals of the BSc Mechanical Engineering programme.
Miscellaneous
Not specified