Testing and approval of medical devicesModule description #50533 / Version 5
- 6 CP
- Portfolio examination
- Graded
- Winter and summer semester
- German
| Module / Version | #50533 / #5 |
|---|---|
| Validity | Since Summer semester 2025 |
| Available language(s) | English, German |
| Credit points | 6 |
| Person responsible for the module | Kraft, Marc |
| Grading | Graded |
| Exam format | Portfolio examination |
| Language(s) of instruction | German |
Affiliation
| Faculty | Fakultät V |
|---|---|
| Institute | Institut für Maschinenkonstruktion und Systemtechnik (IMS) |
| Academic chair | 35351600 FG Medizintechnik |
Contact
| Office | SG 11 |
|---|---|
| Contact person | Diesing, Peter |
| E-mail address | mt-tb-office@win.tu-berlin.de |
| Website | https://www.tu.berlin/medtech/studium-lehre/lehrveranstaltungen/pruefung-und-zulassung-von-medizinprodukten |
Learning outcomes
Students have practical knowledge of the conformity assessment of medical devices and the tests required in this context at testing institutes or in their own laboratory. They have basic knowledge of the procedure for standardization and the introduction of a quality management system. They have the ability to familiarize themselves with new contexts, to structure and visualize them in an understandable way and to present the content to a specialist audience. By applying their knowledge within a project in cooperation with a medical device manufacturer during the summer semester, they are familiar with processes from everyday life in the industry.
Content
Presentation and moderation, management tools, legal basis for medical devices, Medical Devices Act, Directive 93/42/EEC, standardization, quality management at medical device manufacturers, technical documentation, risk management, clinical testing and clinical evaluation, international approval of medical devices, statistics in the testing and approval of medical devices, requirements for testing and calibration laboratories, measurement uncertainty considerations and calibration, development of new testing methods, evaluation of the reprocessing of medical devices, testing of active medical devices.
Module components
Compulsory area
The following courses are mandatory for this module:
| Courses | Type | Number | Frequency | Language | Hours per week | Course catalog |
|---|---|---|---|---|---|---|
| Prüfung und Zulassung von Medizinprodukten I | Integrated course | Winter semester | [de] | 2 | WS 2026/27 (1) ISIS | |
| Prüfung und Zulassung von Medizinprodukten II | Integrated course | Summer semester | [de] | 2 | ISIS |
Courses in the course catalog
Courses created from the teaching units of this module.
Winter semester 2026/27 (1)
Prüfung und Zulassung von Medizinprodukten I (Integrated course) 1
- Prüfung und Zulassung von Medizinprodukten I (Integrierte Veranstaltung) Standardtermin 0535 L 555
Workload and credit points
Prüfung und Zulassung von Medizinprodukten I (Integrated course)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Attendance time | 15 | 2 h | 30 h |
| Preparation/follow-up | 15 | 4 h | 60 h |
| 90 h | |||
Prüfung und Zulassung von Medizinprodukten II (Integrated course)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Attendance time | 15 | 2 h | 30 h |
| Preparation/follow-up | 15 | 4 h | 60 h |
| 90 h | |||
The workload of the module adds up to 180 hours. The module therefore comprises 6 credit points.
Description of teaching and learning methods
In the winter semester, the above-mentioned basics for the testing and approval of medical devices are taught. During the course, what has been learned is immediately consolidated, deepened and presented using short examples.
In the summer semester, the content learned is implemented using a specific medical device and thus placed in an overall context.
In the summer semester, the content learned is implemented using a specific medical device and thus placed in an overall context.
Requirements for participation and examination
Desirable prerequisites for participation in the courses:
a) necessary: very good written and spoken German language skills
b) desirable: Module “Medical Technology 1”
b) desirable: Module “Medical Technology 1”
Mandatory requirements for the module examination registration:
This module has no examination requirements.
Completion of the module
| Grading | Graded |
|---|---|
| Exam format | Portfolio examination |
| Type of portfolio examination | 100 points in total |
| Language | German |
Test elements
| Name | Points/Weight | Category | Duration/Extent |
|---|---|---|---|
| Final presentation | 15 | oral | 20min |
| Written exam | 50 | written | 59min |
| Moderation | 35 | practical | 1 event in summer semester |
Exam description
Performance is achieved in the form of moderation work (35%), a final presentation (15%) and a written examination (50%).
Up to 100 portfolio points can be achieved in the module. The conversion into grades is based on the following table:
Portfolio points Grade
more than or equal to 95 1.0
more than or equal to 90 1.3
more than or equal to 85 1.7
more than or equal to 80 2.0
more than or equal to 75 2.3
more than or equal to 70 2.7
more than or equal to 65 3.0
more than or equal to 60 3.3
more than or equal to 55 3.7
more than or equal to 50 4.0
less than 50 5.0
more than or equal to 60 3.3
more than or equal to 55 3.7
more than or equal to 50 4.0
less than 50 5.0
Up to 100 portfolio points can be achieved in the module. The conversion into grades is based on the following table:
Portfolio points Grade
more than or equal to 95 1.0
more than or equal to 90 1.3
more than or equal to 85 1.7
more than or equal to 80 2.0
more than or equal to 75 2.3
more than or equal to 70 2.7
more than or equal to 65 3.0
more than or equal to 60 3.3
more than or equal to 55 3.7
more than or equal to 50 4.0
less than 50 5.0
more than or equal to 60 3.3
more than or equal to 55 3.7
more than or equal to 50 4.0
less than 50 5.0
Duration of the module
The following number of semesters is estimated for taking and completing the module: 2 semester(s).
This module can be started in the following semesters: Winter and summer semester.
Maximum number of participants
The maximum capacity of participants is 15.
Registration procedures
Registration required in the first week of lectures in ISIS. You can find the link to the course at https://www.tu.berlin/medtech/studium-lehre/lehrveranstaltungen. A binding registration via the examination office or Qispos is necessary before the first part of the course is completed.
Recommended reading, lecture notes
Lecture notes
unavailable
Electronic lecture notes
available – can be found in the corresponding ISIS course
Recommended literature
- 93/42 EWG Richtlinie des Rates vom 14. Juni 1993 über Medizinprodukte
- DIN EN ISO 14971:2001-03 Risikomanagement - Anwendung des Risikomanagements auf Medizinprodukte
- DIN EN ISO/IEC 17025:2005 Allgemeine Anforderungen an die Kompetenz von Prüf und Kalibrierlaboratorien
- Gesetz über Medizinprodukte (MPG)
- Neuman, Martina: Zulassung von Medizinprodukten in der Volksrepublik China. mt-medizintechnik 126 (2006), Nr. 2, S. 58ff
- Niedziella, W.: Wie funktioniert Normung? - Eine Einführung in die nationale, europäische und internationale elektrotechnische Normung, VDE Verlag, Berlin Offenburg 2000
- Seifert, J. W.: Visualisieren - Präsentieren - Moderieren; 2001 Gabal Verlag, Offenbach
Assigned programs
This module version is used in the following programs:
| Program / program version | Semester(s) | Curriculum component |
|---|---|---|
| Biomedical Engineering StuPO 2018 | SS 2025 | 2. Wahlpflichtmodule › 2.1 Medizintechnische Profile › 2.1.1 Angewandte Medizintechnik |
| WS 2025/26 | 2. Wahlpflichtmodule › 2.1 Medizintechnische Profile › 2.1.1 Angewandte Medizintechnik | |
| SS 2026 | 2. Wahlpflichtmodule › 2.1 Medizintechnische Profile › 2.1.1 Angewandte Medizintechnik | |
| WS 2026/27 | 2. Wahlpflichtmodule › 2.1 Medizintechnische Profile › 2.1.1 Angewandte Medizintechnik | |
| Industrial Engineering and Management Industrial Engineering and Management (M. Sc.) - StuPO 2015 | SS 2025 | Ingenieurwissenschaftliche Studienrichtungen/Engineering Majors › Gesundheitstechnik/Healthcare Technology (GT) › Gesundheitstechnik/Healthcare Technology (Wahlpflicht/Compulsory-Elective) |
| WS 2025/26 | Ingenieurwissenschaftliche Studienrichtungen/Engineering Majors › Gesundheitstechnik/Healthcare Technology (GT) › Gesundheitstechnik/Healthcare Technology (Wahlpflicht/Compulsory-Elective) | |
| SS 2026 | Ingenieurwissenschaftliche Studienrichtungen/Engineering Majors › Gesundheitstechnik/Healthcare Technology (GT) › Gesundheitstechnik/Healthcare Technology (Wahlpflicht/Compulsory-Elective) | |
| WS 2026/27 | Ingenieurwissenschaftliche Studienrichtungen/Engineering Majors › Gesundheitstechnik/Healthcare Technology (GT) › Gesundheitstechnik/Healthcare Technology (Wahlpflicht/Compulsory-Elective) | |
| Industrial Engineering and Management Industrial Engineering and Management (M. Sc.) - StuPO 2026 | WS 2026/27 | Engineering Sciences / Specialization › Healthcare Technology › Healthcare Technology (Compulsory Electives) |
| Sociology and Technology Studies StuPO 2014 (7. Mai 2014) | SS 2025 | Technisches Fach › Gesundheitstechnologie und Krankenhausmanagement › Vertiefungsbereich 1 - Medizintechnik |
| WS 2025/26 | Technisches Fach › Gesundheitstechnologie und Krankenhausmanagement › Vertiefungsbereich 1 - Medizintechnik | |
| SS 2026 | Technisches Fach › Gesundheitstechnologie und Krankenhausmanagement › Vertiefungsbereich 1 - Medizintechnik | |
| WS 2026/27 | Technisches Fach › Gesundheitstechnologie und Krankenhausmanagement › Vertiefungsbereich 1 - Medizintechnik |
Miscellaneous
Not specified