Quality Management ProjectModule description #50537 / Version 5
- 6 CP
- Portfolio examination
- Graded
- Winter and summer semester
- German
| Module / Version | #50537 / #5 |
|---|---|
| Validity | Since Summer semester 2026 |
| Available language(s) | German |
| Credit points | 6 |
| Person responsible for the module | Jochem, Roland |
| Grading | Graded |
| Exam format | Portfolio examination |
| Language(s) of instruction | German |
Affiliation
| Faculty | Fakultät V |
|---|---|
| Institute | Institut für Werkzeugmaschinen und Fabrikbetrieb (IWF) |
| Academic chair | 35361300 FG Qualitätswissenschaft |
Contact
| Office | PTZ 3 |
|---|---|
| Contact person | Damaros, Lena Agnes |
| E-mail address | lena.vondamaros@tu-berlin.de |
| Website | http://www.qw.tu-berlin.de/menue/studium_und_lehre/lehrveranstaltungen/qualitaetsmanagement_projekt/ |
Learning outcomes
The primary objective of this course is to teach the fundamentals of project work in an interdisciplinary and international setting. To carry out the project work, students must apply quality management methods under the guidance of experienced mentors from both industry and academia. In this way, theoretical knowledge of QM methods is translated into practical experience, and students’ interpersonal skills are enhanced.
Content
The content of the project work is coordinated with the industry partner. It covers quality management topics such as quality gates in development, FMEA, product audits, failure rate forecasts, process documentation, etc. Industry partners and project assignments may change from semester to semester. Travel to the corporate partners’ locations may be required.
Module components
Compulsory area
The following courses are mandatory for this module:
| Courses | Type | Number | Frequency | Language | Hours per week | Course catalog |
|---|---|---|---|---|---|---|
| Qualitätsmanagement | Project | [de] | 4 | ISIS |
Workload and credit points
Qualitätsmanagement (Project)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Präsenzzeit | 15 | 4 h | 60 h |
| Vor-/Nachbereitung | 15 | 8 h | 120 h |
| 180 h | |||
The workload of the module adds up to 180 hours. The module therefore comprises 6 credit points.
Description of teaching and learning methods
Students receive theoretical instruction on the individual topics to be addressed, either in the form of a lecture or through relevant literature on the subject, as well as a brief introduction to project management. After receiving instruction on the topic from a staff member or expert at the corporate partner, students work largely independently on the assigned task. If necessary, students can consult experienced staff members or experts from the corporate partners and the Department of Quality Science. The work is carried out in small groups of approximately 2-4 students.
Requirements for participation and examination
Desirable prerequisites for participation in the courses:
Attendance at the courses “Quality Management Techniques” and “Fundamentals of Quality Management,” as well as familiarity with Q7 and M7, are advantageous for participation in the project. For group work, a conversational command of German is desirable.
Mandatory requirements for the module examination registration:
This module has no examination requirements.
Completion of the module
| Grading | Graded |
|---|---|
| Exam format | Portfolio examination |
| Type of portfolio examination | 100 points in total |
| Language | German |
Test elements
| Name | Points/Weight | Category | Duration/Extent |
|---|---|---|---|
| Final Report | 30 | written | 12-18 Pages |
| Final Presentation | 50 | oral | 20 Minutes |
| Interim Presentation 1 | 10 | oral | 10 Minutes |
| Interim Presentation 2 | 10 | oral | 10 Minutes |
Exam description
At the end of the project, there will be a presentation of the results involving the industry partner and the responsible department. This presentation will be evaluated in conjunction with a detailed project report.
Grading: Graded.
Exam format: Portfolio exam
Grading scale 2 is used:
95 or higher -> 1.0
90 or higher -> 1.3
85 or higher -> 1.7
80 or higher -> 2.0
75 or higher -> 2.3
70 or higher -> 2.7
65 or higher -> 3.0
60 or higher -> 3.3
55 or higher -> 3.7
50 or higher -> 4.0
Less than 50 -> 5.0
Grading: Graded.
Exam format: Portfolio exam
Grading scale 2 is used:
95 or higher -> 1.0
90 or higher -> 1.3
85 or higher -> 1.7
80 or higher -> 2.0
75 or higher -> 2.3
70 or higher -> 2.7
65 or higher -> 3.0
60 or higher -> 3.3
55 or higher -> 3.7
50 or higher -> 4.0
Less than 50 -> 5.0
Duration of the module
The following number of semesters is estimated for taking and completing the module: 1 semester(s).
This module can be started in the following semesters: Winter and summer semester.
Maximum number of participants
The maximum capacity of participants is 20.
Registration procedures
To register, you must submit an application to the department. Please check our website for registration deadlines:
http://www.qw.tu-berlin.de/menue/studium_und_lehre/lehrveranstaltungen/qualitaetsmanagement_projekt/
http://www.qw.tu-berlin.de/menue/studium_und_lehre/lehrveranstaltungen/qualitaetsmanagement_projekt/
Recommended reading, lecture notes
Lecture notes
unavailable
Electronic lecture notes
unavailable
Recommended literature
No recommended literature given
Assigned programs
This module version is used in the following programs:
| Program / program version | Semester(s) | Curriculum component |
|---|---|---|
| Computational Engineering Science (Informationstechnik im Maschinenwesen) StuPO 2018 (17.01.2018) | WS 2026/27 | 6. Projektarbeit |
| Industrial Engineering and Management Industrial Engineering and Management (M. Sc.) - StuPO 2015 | WS 2026/27 | Integrationsbereich/Integration › Integrationsbereich/Integration (Wahlpflicht/Compulsory-Elective) › Quality Management |
| Industrial Engineering and Management Industrial Engineering and Management (M. Sc.) - StuPO 2026 | WS 2026/27 | Integration Component › Quality Management |
| Mechanical Engineering StuPO 2017 | WS 2026/27 | Wahlpflichtmodule › Project |
| Patent Engineering StuPO 2015 | WS 2026/27 | 3. Projekt › 3.1.Ingenieurwissenschaftliche Projekte |
| Production Engineering StuPO 2018 (09.05.2018) | WS 2026/27 | 5. Projekt |
| Vehicle Engineering StuPO 2017 | WS 2026/27 | 2. Profilmodule › 2.3 Ingenieurtechnische Grundlagen und Methoden |
The practical application of quality management methods helps reinforce the theoretical knowledge gained and provides an opportunity to gain experience in their application and practical implementation.
Miscellaneous
Literature list: Will be announced individually at the beginning of the course.