Skip to content
Technische Universität Berlin Deutsch
Course catalog and module transfer system

Rotor DynamicsModule description #50549 / Version 6

← Module page Deutsche Fassung
Module / Version#50549 / #6
ValiditySince Summer semester 2025
Available language(s)English, German
Credit points6
Person responsible for the moduleLiebich, Robert
GradingGraded
Exam formatOral exam
Language(s) of instructionGerman

Affiliation

FacultyFakultät V
InstituteInstitut für Maschinenkonstruktion und Systemtechnik (IMS)
Academic chair35351200 FG Konstruktion und Produktzuverlässigkeit

Contact

OfficeH 66
Contact personLiebich, Robert
E-mail addressrobert.liebich@tu-berlin.de
Websitehttps://www.tu.berlin/kup/studium-lehre/master/rotordynamik

Learning outcomes

Knowledge:
Students will learn about different types of rotors from the field of mechanical engineering, in particular turbomachinery, and their bearing types. They will acquire detailed knowledge of the various rotordynamic phenomena and causes of undesirable vibrations and damage. In addition, students will learn the mechanical principles for the analytical and numerical description of the dynamic behavior of rotors. The mastery of the vibration behavior of rotating machines meets various sustainability requirements in the product development process due to the associated reduction of noise, vibrations and an extended service life.

Skills:
After completing the module, students will be able to successfully work on problems relating to the development and operation of rotating machines. Students will be able to create models for various vibration phenomena that only occur in rotordynamics and calculate these for preliminary design of machines. In addition, they will be able to transfer this modeling to more complex system models in order to carry out extensive detailed investigations for development or damage analyses. Students will be able to recognize the majority, including the most important, of possible cases of damage to rotating machines based on the typical vibrational phenomena.

Expertise:
Upon successful completion of the module, students will have the necessary skills for independent machine diagnostics. They will be able to recognize rotordynamic problems and assess rotating machines with regard to their dynamic behaviour and provide recommendations for improving the vibrational situation or avoiding damage incidents. Students will have the necessary know-how to create detailed, realistic calculation models in various simulation environments.

Content

The course will first cover the basics of rotordynamics. Using the example of the Laval rotor, the phenomena of rotor dynamics such as bending-critical speeds, unbalance vibrations, gyroscopic effects, external and internal damping will be presented. Furthermore, real rotors are modeled and analyzed using suitable calculation methods for rotordynamics such as the finite element method and the transfer matrix method. In addition, the course deals with various bearing arrangements such as rolling, plain and magnetic bearings and special phenomena such as rotor-stator contact, sudden unbalance excitation, or the shaft with a crack. Calculation tasks on the various topics will then be carried out to consolidate and apply the material.

Module components

Compulsory area

The following courses are mandatory for this module:

CoursesTypeNumberFrequencyLanguageHours per weekCourse catalog
RotordynamikIntegrated course0535 L 581 Winter semester[de]4 ISIS

Courses in the course catalog

Courses created from the teaching units of this module.

Winter semester 2026/27 (2)

Rotordynamik (Integrated course) 2

All groups of this course in the catalog

Workload and credit points

Rotordynamik (Integrated course)

Workload descriptionMultiplierHoursTotal
Attendance time154 h60 h
Preparation and follow-up158 h120 h
180 h

The workload of the module adds up to 180 hours. The module therefore comprises 6 credit points.

Description of teaching and learning methods

The material presented is applied and deepened with the help of example problems. The knowledge acquired is applied by the students themselves in homework assignments and the calculation and evaluation is practiced.

Requirements for participation and examination

Desirable prerequisites for participation in the courses:

a) obligatory: B.Sc. Mechanical Engineering, Transport Systems, Engineering Science, and the Mechanics module
b) desirable: the modules Kinematics & Dynamics, Mechanical Vibrations, Differential Equations for Engineers

Mandatory requirements for the module examination registration:

The examination requirements could not be retrieved.

Completion of the module

GradingGraded
Exam formatOral exam
LanguageGerman
Duration/Extent50 minutes

Duration of the module

The following number of semesters is estimated for taking and completing the module: 1 semester(s).

This module can be started in the following semesters: Winter semester.

Maximum number of participants

The maximum capacity of participants is 50.

Registration procedures

ISIS and MOSES

Recommended reading, lecture notes

Lecture notes

unavailable

Electronic lecture notes

available – www.kup.tu-berlin.de

Recommended literature

  • Childs: Turbomachinery Rotordynamics: Phenomena, Modeling and Analysis, New York, Wiley & Sons 1993
  • Gasch, Knothe: Strukturdynamik, Berlin, Springer 1987/1989
  • Gasch, Nordmann, Pfützner : Rotordynamik, Berlin, Springer 2002
  • Krämer: Dynamics of Rotor and Foundation, Berlin, Springer 1993
  • Vance: Rotordynamics of Turbomachinery, New York, Wiley & Sons 1988

Assigned programs

This module version is used in the following programs:

Program / program versionSemester(s)Curriculum component
Aeronautics and Astronautics
StuPO 2018
SS 20253. Profilmodule › 3.1 Luftfahrtantriebe
WS 2025/263. Profilmodule › 3.1 Luftfahrtantriebe
SS 20263. Profilmodule › 3.1 Luftfahrtantriebe
WS 2026/273. Profilmodule › 3.1 Luftfahrtantriebe
Computational Engineering Science (Informationstechnik im Maschinenwesen)
StuPO 2018 (17.01.2018)
SS 20252. Kernbereich: Simulation und Optimierung
WS 2025/262. Kernbereich: Simulation und Optimierung
SS 20262. Kernbereich: Simulation und Optimierung
WS 2026/272. Kernbereich: Simulation und Optimierung
Engineering Science
StuPO 2007 (19.12.2007)
SS 20252.4 Festkörpermechanik › 2.4a Kernbereich
WS 2025/262.4 Festkörpermechanik › 2.4a Kernbereich
SS 20262.4 Festkörpermechanik › 2.4a Kernbereich
Engineering Science
StuPO 2020
SS 20252.4 Festkörpermechanik › 2.4a Kernbereich
WS 2025/262.4 Festkörpermechanik › 2.4a Kernbereich
SS 20262.4 Festkörpermechanik › 2.4a Kernbereich
WS 2026/272.4 Festkörpermechanik › 2.4a Kernbereich
Industrial Engineering and Management
Industrial Engineering and Management (M. Sc.) - StuPO 2015
SS 2025Ingenieurwissenschaftliche Studienrichtungen/Engineering Majors › Maschinenbau/Mechanical Engineering (MB) › Maschinenbau/Mechanical Engineering (Wahlpflicht/Compulsory-Elective) › Engineering Design
WS 2025/26Ingenieurwissenschaftliche Studienrichtungen/Engineering Majors › Maschinenbau/Mechanical Engineering (MB) › Maschinenbau/Mechanical Engineering (Wahlpflicht/Compulsory-Elective) › Engineering Design
SS 2026Ingenieurwissenschaftliche Studienrichtungen/Engineering Majors › Maschinenbau/Mechanical Engineering (MB) › Maschinenbau/Mechanical Engineering (Wahlpflicht/Compulsory-Elective) › Engineering Design
WS 2026/27Ingenieurwissenschaftliche Studienrichtungen/Engineering Majors › Maschinenbau/Mechanical Engineering (MB) › Maschinenbau/Mechanical Engineering (Wahlpflicht/Compulsory-Elective) › Engineering Design
Industrial Engineering and Management
Industrial Engineering and Management (M. Sc.) - StuPO 2026
WS 2026/27Engineering Sciences / Specialization › Mechanical Engineering › Mechanical Engineering (Compulsory Electives) › Engineering Design
Mechanical Engineering
StuPO 2017
SS 2025Wahlpflichtmodule › Kernmodule › Berechnung
WS 2025/26Wahlpflichtmodule › Kernmodule › Berechnung
SS 2026Wahlpflichtmodule › Kernmodule › Berechnung
WS 2026/27Wahlpflichtmodule › Kernmodule › Berechnung
Patent Engineering
StuPO 2015
SS 20252.1. Ingenieurwissenschaftliche Kernmodule › 2.1.2. Berechnung
WS 2025/262.1. Ingenieurwissenschaftliche Kernmodule › 2.1.2. Berechnung
SS 20262.1. Ingenieurwissenschaftliche Kernmodule › 2.1.2. Berechnung
WS 2026/272.1. Ingenieurwissenschaftliche Kernmodule › 2.1.2. Berechnung
Technomathematics
Technomathematics (M. Sc.) - StuPO 2014
SS 2025Studienrichtungen › Maschinenbau › Maschinenbau › Kernmodule
WS 2025/26Studienrichtungen › Maschinenbau › Maschinenbau › Kernmodule
SS 2026Studienrichtungen › Maschinenbau › Maschinenbau › Kernmodule
WS 2026/27Studienrichtungen › Maschinenbau › Maschinenbau › Kernmodule
This module is aimed in particular at students from the MSc. Mechanical Engineering (core module Calculation) and to Master's students interested in design and analysis from Transportation (M.Sc. Aerospace Engineering) and Physical Engineering.

Miscellaneous

Not specified