Construction and structure of rail vehiclesModule description #50554 / Version 6
- 6 CP
- Portfolio examination
- Graded
- Winter semester
- German
This module description is not valid in the current semester (Winter semester 2026/27).
Current version (v7)
| Module / Version | #50554 / #6 |
|---|---|
| Validity | Summer semester 2025 – Summer semester 2025 |
| Available language(s) | English, German |
| Credit points | 6 |
| Person responsible for the module | Hecht, Markus |
| Grading | Graded |
| Exam format | Portfolio examination |
| Language(s) of instruction | German |
Affiliation
| Faculty | Fakultät V |
|---|---|
| Institute | Institut für Land- und Seeverkehr |
| Academic chair | 35331800 FG Schienenfahrzeuge |
Contact
| Office | SG 14 |
|---|---|
| Contact person | Kaffler, Aaron |
| E-mail address | aaron.kaffler@tu-berlin.de |
| Website | https://www.schienenfzg.tu-berlin.de/menue/studium_und_lehre/lehrangebot/aufbau_und_struktur_von_schienenfahrzeugen/ |
Learning outcomes
Students are shown the complex interrelationships in the railroad system. They are enabled to work on vehicle technology issues in relation to the overall system. The independent processing and solving of problems is encouraged through exercises.
Content
In addition to general vehicle concepts for both passenger transport and rail freight transport, the module Structure of rail vehicles also looks at wagon designs. A further focus is on the bogies with the components: Bogie frames, primary and secondary suspensions.
The following topics are dealt with in more detail:
- Clearance gauge, vehicle gauge
- Design system, design as an iterative process
- Track performance
- Axle sequence, basic vehicle structure
- Car body construction, superstructures Differential/integral construction: Steel, alumi-num, sandwich (hybrid construction), winding technology, modular concept
- Wheelset elements, wheel designs
- Suspension designs, axle guides
- Single-axle bogies, bogies, control mechanisms
- Active systems, tilting technology, mechanical design, control concepts
- Bogie frames
- low-floor technology
- Comfort equipment
- Safety aspects of rail vehicles, crash
The following topics are dealt with in more detail:
- Clearance gauge, vehicle gauge
- Design system, design as an iterative process
- Track performance
- Axle sequence, basic vehicle structure
- Car body construction, superstructures Differential/integral construction: Steel, alumi-num, sandwich (hybrid construction), winding technology, modular concept
- Wheelset elements, wheel designs
- Suspension designs, axle guides
- Single-axle bogies, bogies, control mechanisms
- Active systems, tilting technology, mechanical design, control concepts
- Bogie frames
- low-floor technology
- Comfort equipment
- Safety aspects of rail vehicles, crash
Module components
Compulsory area
The following courses are mandatory for this module:
| Courses | Type | Number | Frequency | Language | Hours per week | Course catalog |
|---|---|---|---|---|---|---|
| Aufbau und Struktur von Schienenfahrzeugen | Lecture | 0533 L 721 | Winter semester | [de] | 2 | WS 2026/27 (1) ISIS |
| Aufbau und Struktur von Schienenfahrzeugen | Exercise | 0533 L 722 | Winter semester | [de] | 2 | WS 2026/27 (1) ISIS |
Courses in the course catalog
Courses created from the teaching units of this module.
Winter semester 2026/27 (2)
Aufbau und Struktur von Schienenfahrzeugen (Lecture) 1
- Aufbau und Struktur von Schienenfahrzeugen (Vorlesung) 1. Termingruppe 0533 L 721
Aufbau und Struktur von Schienenfahrzeugen (Exercise) 1
- Aufbau und Struktur von Schienenfahrzeugen (Übung) 1. Termingruppe 0533 L 722
Workload and credit points
Aufbau und Struktur von Schienenfahrzeugen (Lecture)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Attendance time | 15 | 2 h | 30 h |
| Preparation/follow-up | 15 | 4 h | 60 h |
| 90 h | |||
Aufbau und Struktur von Schienenfahrzeugen (Exercise)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Attendance time | 15 | 2 h | 30 h |
| Preparation/follow-up | 15 | 4 h | 60 h |
| 90 h | |||
The workload of the module adds up to 180 hours. The module therefore comprises 6 credit points.
Description of teaching and learning methods
The course content is taught through lectures and exercises. The topics of the lectures are explored in greater depth in the exercises.
Requirements for participation and examination
Desirable prerequisites for participation in the courses:
- Introduction to rail vehicle technology
- Fundamentals of technical mechanics and design theory
- Fundamentals of technical mechanics and design theory
Mandatory requirements for the module examination registration:
This module has no examination requirements.
Completion of the module
| Grading | Graded |
|---|---|
| Exam format | Portfolio examination |
| Type of portfolio examination | 100 points in total |
| Language | German |
Test elements
| Name | Points/Weight | Category | Duration/Extent |
|---|---|---|---|
| oral consultation | 60 | oral | approx. 20 minutes |
| written examination | 40 | written | 75 minutes |
Exam description
Portfolio examination with the following elements: written examination and oral consultation
Duration of the module
The following number of semesters is estimated for taking and completing the module: 1 semester(s).
This module can be started in the following semesters: Winter semester.
Maximum number of participants
This module is not limited to a number of students.
Registration procedures
No later than 6 weeks after the start of the module at the examination office or via QISPOS
Recommended reading, lecture notes
Lecture notes
unavailable
Electronic lecture notes
available – in the lecture
Recommended literature
No recommended literature given
Assigned programs
This module version is used in the following programs:
| Program / program version | Semester(s) | Curriculum component |
|---|---|---|
| Automotive Engineering (teacher training) Kernfach StuPO 2016 | SS 2025 | Fachwissenschaftlicher Vertiefungsbereich |
| Automotive Engineering (teacher training) Automotive Engineering (teacher training) (B. Sc.) - Kernfach StuPO 2020 | SS 2025 | Wahlpflichtbereich › Fachwissenschaftlicher Wahlpflichtbereich |
| Automotive Engineering (teacher training) Zweitfach StuPO 2016 | SS 2025 | Fachwissenschaftlicher Vertiefungsbereich |
| Automotive Engineering (teacher training) Automotive Engineering (teacher training) (B. Sc.) - Zweitfach StuPO 2020 | SS 2025 | Wahlpflichtbereich › Fachwissenschaftlicher Wahlpflichtbereich |
| Computational Engineering Science (Informationstechnik im Maschinenwesen) StuPO 2018 (17.01.2018) | SS 2025 | 4. Profilbereich › 4.2 Profilbereich: Konstruktion und Fertigung › 4.2c Produktorientierte Fächer |
| Industrial Engineering and Management Industrial Engineering and Management (B. Sc.) - StuPO 2015 | SS 2025 | Ingenieurwissenschaftliche Studienrichtungen › Verkehrswesen (VW) › Verkehrswesen (Wahlpflicht) |
| Industrial Engineering and Management Industrial Engineering and Management (M. Sc.) - StuPO 2015 | SS 2025 | Ingenieurwissenschaftliche Studienrichtungen/Engineering Majors › Verkehrswesen/Transportation Engineering (VW) › Verkehrswesen/Transportation Engineering (Wahlpflicht/Compulsory-Elective) › Railway Engineering |
| Mechanical Engineering StuPO 2017 | SS 2025 | Wahlpflichtmodule › Profilmodule › Produkte |
| Patent Engineering StuPO 2015 | SS 2025 | 2.2. Ingenieurwissenschaftliche Profilmodule › 2.2.3. Produkte |
| Technomathematics Technomathematics (M. Sc.) - StuPO 2014 | SS 2025 | Studienrichtungen › Verkehrswesen › Verkehrswesen › Fahrzeugtechnik |
| Technomathematics Technomathematics (B. Sc.) - StuPO 2014 | SS 2025 | Studienrichtungen › Technisches Gebiet - Verkehrswesen › Studienrichtung › Fahrzeugtechnik |
| Transport Systems StuPO 2018 | SS 2025 | B. Studienrichtungen › Fahrzeugtechnik › 4. Vertiefungs- und Anwendungsbereich |
| Vehicle Engineering StuPO 2017 | SS 2025 | 2. Profilmodule › 2.1 Schienenfahrzeugtechnik |
This module is particularly recommended for the Automotive Engineering course. Furthermore, in the Planning and Operation field of study, a focus can be placed on rail transport with a background in vehicle technology. Additional options from the fields of mechanical engineering and industrial engineering are also possible. The module forms the basis for the modules: Dynamics of rail vehicles.
Miscellaneous
Not specified