SchwingungsmesstechnikModule description #50565 / Version 5
- 6 CP
- Portfolio examination
- Graded
- Summer semester
- German
This module description is not valid in the current semester (Winter semester 2026/27).
Current version (v6)
| Module / Version | #50565 / #5 |
|---|---|
| Validity | SS 2018 – Summer semester 2025 |
| Available language(s) | German |
| Credit points | 6 |
| Person responsible for the module | Wagner, Utz |
| Grading | Graded |
| Exam format | Portfolio examination |
| Language(s) of instruction | German |
Affiliation
| Faculty | Fakultät V |
|---|---|
| Institute | Institut für Mechanik |
| Academic chair | 35371400 FG Mechanik, insbesondere Mechatronische Maschinendynamik |
Contact
| Office | MS 1 |
|---|---|
| Contact person | Gödecker, Holger |
| E-mail address | holger.goedecker@tu-berlin.de |
| Website | Not specified |
Learning outcomes
Einführung in die Grundlagen und praktische Anwendungen der Meßtechnik bezogen auf die Messung mechanischer Schwingungen technischer Systeme.
Content
Elemente der Meßkette; Lineare Schwinger mit 1 FHG; Signalanalyse: Fouriertransformation, DFT, FFT, Fehler, statistische Größen; Experimentelle Ermittlung von Übertragungsfunktionen; Experimentelle Ermittlung von Systemparametern; Sensoren; Systeme mit endlich vielen FHG.
Module components
Compulsory area
The following courses are mandatory for this module:
Workload and credit points
Schwingungsmesstechnik (Lecture)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Präsenzzeit | 15 | 2 h | 30 h |
| Vor-/Nachbereitung | 15 | 4 h | 60 h |
| 90 h | |||
Schwingungsmesstechnik (Exercise)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Präsenzzeit | 15 | 2 h | 30 h |
| Vor-/Nachbereitung | 15 | 4 h | 60 h |
| 90 h | |||
The workload of the module adds up to 180 hours. The module therefore comprises 6 credit points.
Description of teaching and learning methods
Erarbeitung der theoretischen Grundlagen in der Vorlesung. In den Übungen praktische und experimentelle Anwendungen des Vorlesungsstoffs.
Requirements for participation and examination
Desirable prerequisites for participation in the courses:
a) obligatorisch: Grundvorlesungen der Mechanik (insbesondere Dynamik) und Mathematik
b) wünschenswert: vorheriger Besuch der Vorlesung Mechanische Schwingungslehre und Maschinendynamik
b) wünschenswert: vorheriger Besuch der Vorlesung Mechanische Schwingungslehre und Maschinendynamik
Mandatory requirements for the module examination registration:
This module has no examination requirements.
Completion of the module
| Grading | Graded |
|---|---|
| Exam format | Portfolio examination |
| Type of portfolio examination | 100 points in total |
| Language | German |
Test elements
| Name | Points/Weight | Category | Duration/Extent |
|---|---|---|---|
| mündliche Rücksprache | 30 | oral | 20 Minuten pro Person |
| Internship | 50 | practical | 4 Versuche und 1 Übungsblatt |
| Test vor den Versuchen (Multiple Choice) | 20 | written | 30 Minuten |
Exam description
Teilleistungen bestehen aus:
- Vortest (Multiple Choice, 20%)
- Praktikum (50%)
- mündliche Rücksprache (30%)
- Vortest (Multiple Choice, 20%)
- Praktikum (50%)
- mündliche Rücksprache (30%)
Duration of the module
The following number of semesters is estimated for taking and completing the module: 1 semester(s).
This module can be started in the following semesters: Summer semester.
Maximum number of participants
The maximum capacity of participants is 50.
Registration procedures
Die verbindliche Anmeldung erfolgt bei dem ersten Vorlesungstermin
Recommended reading, lecture notes
Lecture notes
unavailable
Electronic lecture notes
available – E-Kreide und ergänzende Materialen bei ISIS
Recommended literature
- Praxiswissen Schwingungsmesstechnik – T. Kuttner (1. Auflage)
Assigned programs
This module version is used in the following programs:
| Program / program version | Semester(s) | Curriculum component |
|---|---|---|
| Biomedical Engineering StuPO 2018 | SS 2025 | 2. Wahlpflichtmodule › 2.2 Ingenieurwissenschaftliche Vertiefungen |
| Computational Engineering Science (Informationstechnik im Maschinenwesen) StuPO 2018 (17.01.2018) | SS 2025 | 3. Kernbereich: Messen, Steuern, Regeln |
| WS 2025/26 | 3. Kernbereich: Messen, Steuern, Regeln | |
| Engineering Science StuPO 09.01.2012 | SS 2025 | 06. Schwerpunkte › 6.6 Technische Akustik |
| WS 2025/26 | 06. Schwerpunkte › 6.3 Mechatronik › Wahlpflichtmodule | |
| Engineering Science StuPO 2007 (19.12.2007) | SS 2025 | 2.3 Mechatronik › 2.3a Kernbereich |
| WS 2025/26 | 2.3 Mechatronik › 2.3a Kernbereich | |
| Engineering Science StuPO 2020 | SS 2025 | 2.6 Technische Akustik › 2.6b Ergänzungsbereich |
| Engineering Science StuPO 2020 | SS 2025 | Wahlpflichtmodule › 6. Schwerpunkte › 6.6 Technische Akustik |
| Mechanical Engineering StuPO 2017 | WS 2023/24 | Wahlpflichtmodule › Profilmodule › Mess- und Automatisierungstechnik |
| SS 2024 | Wahlpflichtmodule › Profilmodule › Mess- und Automatisierungstechnik | |
| WS 2024/25 | Wahlpflichtmodule › Profilmodule › Mess- und Automatisierungstechnik | |
| SS 2025 | Wahlpflichtmodule › Profilmodule › Mess- und Automatisierungstechnik | |
| WS 2025/26 | Wahlpflichtmodule › Profilmodule › Mess- und Automatisierungstechnik | |
| Naval Architecture and Ocean Engineering StuPo 2017 | SS 2025 | 2. Profilmodule › 2.3 Strukturanalyse |
| Patent Engineering StuPO 2015 | SS 2025 | 2.2. Ingenieurwissenschaftliche Profilmodule › 2.2.5. Mess- und Automatisierungstechnik |
| WS 2025/26 | 2.2. Ingenieurwissenschaftliche Profilmodule › 2.2.5. Mess- und Automatisierungstechnik | |
| Production Engineering StuPO 2018 (09.05.2018) | SS 2025 | 4. Profilmodule › 4.2 Automatisierungs- und Informationstechnik |
| Technomathematics Technomathematics (M. Sc.) - StuPO 2014 | SS 2025 | Studienrichtungen › Physikalische Ingenieurwissenschaft › Physikalische Ingenieurwissenschaft › Technische Akustik |
| Technomathematics Technomathematics (B. Sc.) - StuPO 2014 | SS 2025 | Studienrichtungen › Technisches Gebiet - Physikalische Ingenieurwissenschaft › Schwerpunkt › Technische Akustik |
| Vehicle Engineering StuPO 2017 | SS 2025 | 2. Profilmodule › 2.3 Ingenieurtechnische Grundlagen und Methoden |
Dieses Modul ist besonders geeignet für den Studiengang Physikalische Ingenieurwissenschaft sowie zur Vertiefung im Maschinenbau bzw. als Wahlmodul in weiteren Studiengängen
Miscellaneous
Not specified