Statics and Mechanics of MaterialsModule description #50583 / Version 11
- 9 CP
- Portfolio examination
- Graded
- Winter and summer semester
- German
This module description is not valid in the current semester (Winter semester 2026/27).
Current version (v13)
| Module / Version | #50583 / #11 |
|---|---|
| Validity | Summer semester 2025 – Summer semester 2025 |
| Available language(s) | German |
| Credit points | 9 |
| Person responsible for the module | Popov, Valentin |
| Grading | Graded |
| Exam format | Portfolio examination |
| Language(s) of instruction | German |
Affiliation
| Faculty | Fakultät V |
|---|---|
| Institute | Institut für Mechanik |
| Academic chair | 35371100 FG Mechanik, insbes. Kontinuumsmechanik und Materialtheorie |
Contact
| Office | MS 2 |
|---|---|
| Contact person | Müller, Wolfgang |
| E-mail address | grit.lamprecht@tu-berlin.de |
| Website | Not specified |
Learning outcomes
The following skills should be developed by students of technical mechanics:
Basic knowledge in mechanics, which enables and promotes the attendance of advanced courses in the Bachelor's and Master's programmes.
The basic knowledge of mechanics to be taught in the foundation degree programme is intended to ensure employability in order to enable training and further education throughout a student's professional life.
However, students' skills should not be limited to the theoretical understanding of problems in mechanics; the ability to calculate and solve concrete and practical engineering problems is also promoted.
The ability to check one's own results and to clearly recognise the application limits of the models used is to be achieved as the basis for the professional reliability of the engineers being trained. This requires a deeper understanding of the necessary basic material of mechanics.
Students are introduced to the basics of modelling.
The basic knowledge of technical mechanics enables students to recognise analogies to complex technical constructions and to other specialist areas and to apply this knowledge there as well.
Basic knowledge in mechanics, which enables and promotes the attendance of advanced courses in the Bachelor's and Master's programmes.
The basic knowledge of mechanics to be taught in the foundation degree programme is intended to ensure employability in order to enable training and further education throughout a student's professional life.
However, students' skills should not be limited to the theoretical understanding of problems in mechanics; the ability to calculate and solve concrete and practical engineering problems is also promoted.
The ability to check one's own results and to clearly recognise the application limits of the models used is to be achieved as the basis for the professional reliability of the engineers being trained. This requires a deeper understanding of the necessary basic material of mechanics.
Students are introduced to the basics of modelling.
The basic knowledge of technical mechanics enables students to recognise analogies to complex technical constructions and to other specialist areas and to apply this knowledge there as well.
Content
Statics: force and moment of force, equilibrium conditions, statics of rigid bodies, centre of gravity, statically determinate structures, trusses, static friction.
Fundamentals of elastostatics: internal loads and stresses, displacements, distortions, Hooke's law, bending and torsion of bars, moments of inertia, calculation of statically indeterminate systems, asymmetric bending, stress and deformation tensors, Mohr's stress circle, strength hypotheses, stability (buckling).
Fundamentals of elastostatics: internal loads and stresses, displacements, distortions, Hooke's law, bending and torsion of bars, moments of inertia, calculation of statically indeterminate systems, asymmetric bending, stress and deformation tensors, Mohr's stress circle, strength hypotheses, stability (buckling).
Module components
Compulsory area
The following courses are mandatory for this module:
| Courses | Type | Number | Frequency | Language | Hours per week | Course catalog |
|---|---|---|---|---|---|---|
| Statik und elementare Festigkeitslehre/Mechanik I | Lecture | 0530 L 011 | Winter and summer semester | [de] | 4 | WS 2026/27 (1) ISIS |
| Statik und elementare Festigkeitslehre/Mechanik I | Exercise | 0530 L 014 | Winter and summer semester | [de] | 2 | WS 2026/27 (1) ISIS |
Courses in the course catalog
Courses created from the teaching units of this module.
Winter semester 2026/27 (2)
Statik und elementare Festigkeitslehre/Mechanik I (Lecture) 1
- Statik und elementare Festigkeitslehre/Mechanik I (Vorlesung) Vorlesungen 0530 L 011
Statik und elementare Festigkeitslehre/Mechanik I (Exercise) 1
- Statik und elementare Festigkeitslehre/Mechanik I (Übung) Große Übung StelF 0530 L 014
Workload and credit points
Statik und elementare Festigkeitslehre/Mechanik I (Lecture)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Attendance time | 15 | 4 h | 60 h |
| Preparation/rework | 15 | 8 h | 120 h |
| 180 h | |||
Statik und elementare Festigkeitslehre/Mechanik I (Exercise)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Attendance time | 15 | 2 h | 30 h |
| Preparation/rework | 15 | 4 h | 60 h |
| 90 h | |||
The workload of the module adds up to 270 hours. The module therefore comprises 9 credit points.
Description of teaching and learning methods
Lectures, exercise, small group exercises
Requirements for participation and examination
Desirable prerequisites for participation in the courses:
a) obligatory: Refreshed knowledge of maths (A-levels) is a prerequisite (the maths preparation course will help you to refresh your knowledge).
b) desirable: Knowledge of the basics of differential and integral calculus is highly desirable, but will also be briefly introduced in the technical mechanics lectures. Corresponding skills should be acquired in the course of the semester.
b) desirable: Knowledge of the basics of differential and integral calculus is highly desirable, but will also be briefly introduced in the technical mechanics lectures. Corresponding skills should be acquired in the course of the semester.
Mandatory requirements for the module examination registration:
This module has no examination requirements.
Completion of the module
| Grading | Graded |
|---|---|
| Exam format | Portfolio examination |
| Type of portfolio examination | 100 points in total |
| Language | German |
Test elements
| Name | Points/Weight | Category | Duration/Extent |
|---|---|---|---|
| Short-Question test 1 | 20 | written | 60 Min. |
| Written test | 60 | written | 60 Min. |
| Short-question test 2 | 20 | written | 60 Min. |
Exam description
Portfolio examination consisting of three parts: two short question tests and one written test.
The examination is passed if a total of at least 50% of the points are achieved in all three parts of the examination.
Grading key
Grade / Points
1,0 / 89-100
1,3 / 85-88
1,7 / 80-84
2,0 / 76-79
2,3 / 72-75
2,7 / 67-71
3,0 / 63-66
3,3 / 59-62
3,7 / 54-58
4,0 / 50-53
The examination is passed if a total of at least 50% of the points are achieved in all three parts of the examination.
Grading key
Grade / Points
1,0 / 89-100
1,3 / 85-88
1,7 / 80-84
2,0 / 76-79
2,3 / 72-75
2,7 / 67-71
3,0 / 63-66
3,3 / 59-62
3,7 / 54-58
4,0 / 50-53
Duration of the module
The following number of semesters is estimated for taking and completing the module: 1 semester(s).
This module can be started in the following semesters: Winter and summer semester.
Maximum number of participants
This module is not limited to a number of students.
Registration procedures
Registration for the small group exercises (Tutorien) and for the exams takes place via MOSES.
Recommended reading, lecture notes
Lecture notes
unavailable
Electronic lecture notes
available
Recommended literature
- Gross, Hauger, Schnell: Technische Mechanik 1. Schnell, Gross, Hauger: Technische Mechanik 2.
Assigned programs
This module version is used in the following programs:
| Program / program version | Semester(s) | Curriculum component |
|---|---|---|
| Civil Engineering Civil Engineering (B. Sc.) - StuPO 2015 (1. Änderung 2018) | SS 2025 | Pflichtbereich |
| WS 2025/26 | Pflichtbereich | |
| Civil Engineering (teacher training) Civil Engineering (teacher training) (M. Ed.) - StuPO 2015 | WS 2025/26 | Fachwissenschaftlicher Wahlpflichtbereich |
| Civil Engineering (teacher training) Civil Engineering (teacher training) (B. Sc.) - StuPO-Neufassung 2020 | WS 2025/26 | Wahlpflichtbereich › Fachwissenschaftlicher Wahlpflichtbereich I: Baustatik/Tragwerkslehre |
| Computational Engineering Science (Informationstechnik im Maschinenwesen) StuPO 2018 | SS 2025 | 2. Technische und naturwissenschaftliche Grundlagen |
| WS 2025/26 | 2. Technische und naturwissenschaftliche Grundlagen | |
| Engineering Science StuPO 09.01.2012 | SS 2025 | 03. Technisch-naturwissenschaftliche Grundlagen › Pflichtmodule |
| WS 2025/26 | 03. Technisch-naturwissenschaftliche Grundlagen › Pflichtmodule | |
| Engineering Science StuPO 2020 | SS 2025 | Pflichtmodule › 3. Technisch-naturwissenschaftliche Grundlagen |
| Industrial Engineering and Management Industrial Engineering and Management (B. Sc.) - StuPO 2015 | SS 2025 | Ingenieurwissenschaftliche Studienrichtungen › Bauingenieurwesen (BI) › Bauingenieurwesen (Pflicht) |
| MINTgruen pre-study orientation program MINTgruen pre-study orientation program (OS.) - Studienaufbau MINTgrün | SS 2025 | Wahlpflicht MINT › Module aus der Technik |
| WS 2025/26 | Wahlpflicht MINT › Module aus der Technik | |
| Mechanical Engineering StuPO 2017 | SS 2025 | Pflichtbereich › Naturwissenschaftliche Grundlagen |
| WS 2025/26 | Pflichtbereich › Naturwissenschaftliche Grundlagen | |
| Natural Sciences in the Information Society StuPO 2018 | WS 2025/26 | Wahlpflichtbereich › Technik |
| Natural Sciences in the Information Society Natural Sciences in the Information Society (B. Sc.) - StuPO 2025 | WS 2025/26 | Wahlpflichtbereich › Wahlpflichtbereich Technik |
| Sociology and Technology Studies StuPO 2014 (7. Mai 2014) | SS 2025 | Technisches Fach › Fabrikmanagement › Vertiefungsbereich |
| Technomathematics Technomathematics (B. Sc.) - StuPO 2014 | SS 2025 | Studienrichtungen › Technisches Gebiet - Maschinenbau › Naturwissenschaftliche Grundlagen |
| Transport Systems StuPO 2018 | SS 2025 | A. Grundlagen › 1. Pflichtbereich › 1.2 Technisch-naturwissenschaftliche Grundlagen |
| WS 2025/26 | A. Grundlagen › 1. Pflichtbereich › 1.2 Technisch-naturwissenschaftliche Grundlagen |
Miscellaneous
Not specified