Technologies of Virtual Product Development IModule description #50606 / Version 5
- 6 CP
- Portfolio examination
- Graded
- Winter semester
- German
| Module / Version | #50606 / #5 |
|---|---|
| Validity | Since Winter semester 2025/26 |
| Available language(s) | English, German |
| Credit points | 6 |
| Person responsible for the module | Stark, Rainer |
| Grading | Graded |
| Exam format | Portfolio examination |
| Language(s) of instruction | German |
Affiliation
| Faculty | Fakultät V |
|---|---|
| Institute | Institut für Werkzeugmaschinen und Fabrikbetrieb (IWF) |
| Academic chair | 35361500 FG Industrielle Informationstechnik |
Contact
| Office | PTZ 4 |
|---|---|
| Contact person | Cintuglu, Burak Kaan |
| E-mail address | Lehre.TViProI@iit.tu-berlin.de |
| Website | https://www.tu.berlin/iit/studium-lehre/master/technologien-der-virtuellen-produktentstehung-i |
Learning outcomes
After successfully completing the module, students will be able to:
Apply geometry processing and systematic design principles
- Analyze, model, and optimize complex geometries.
- Utilize systematic design principles for the structured development of technical solutions.
Implement requirements management in product development
- Systematically capture, document, and analyze requirements.
- Use requirements management methods to guide the development process.
Effectively use CAD and CAE tools
- Model components and assemblies using modern CAD systems.
- Apply CAE methods for simulation and optimization of components.
Integrate knowledge-based engineering (KBE)
- Apply rule-based modeling approaches to automate design processes.
- Incorporate design guidelines and engineering knowledge into digital models.
Utilize product data management (PDM) and virtual reality (VR) in the development process
Practical use of the Siemens PLM suite
- Conduct modeling of components, assemblies, and freeform geometries.
- Design sheet metal components considering manufacturing constraints.
- Create, manage, and organize product structures within a PDM system.
Through these acquired competencies, students will be equipped to efficiently use modern development tools and systematically structure product development processes
Apply geometry processing and systematic design principles
- Analyze, model, and optimize complex geometries.
- Utilize systematic design principles for the structured development of technical solutions.
Implement requirements management in product development
- Systematically capture, document, and analyze requirements.
- Use requirements management methods to guide the development process.
Effectively use CAD and CAE tools
- Model components and assemblies using modern CAD systems.
- Apply CAE methods for simulation and optimization of components.
Integrate knowledge-based engineering (KBE)
- Apply rule-based modeling approaches to automate design processes.
- Incorporate design guidelines and engineering knowledge into digital models.
Utilize product data management (PDM) and virtual reality (VR) in the development process
Practical use of the Siemens PLM suite
- Conduct modeling of components, assemblies, and freeform geometries.
- Design sheet metal components considering manufacturing constraints.
- Create, manage, and organize product structures within a PDM system.
Through these acquired competencies, students will be equipped to efficiently use modern development tools and systematically structure product development processes
Content
In the first part of the course, students will acquire in-depth knowledge on topics such as geometry processing, systematic design, requirements management, Computer-Aided Design (CAD), Computer-Aided Engineering (CAE), and Knowledge-Based Engineering (KBE).
Additionally, students will be introduced to systems for product data management and virtual reality (VR).
Additionally, students will be introduced to systems for product data management and virtual reality (VR).
Module components
Compulsory area
The following courses are mandatory for this module:
| Courses | Type | Number | Frequency | Language | Hours per week | Course catalog |
|---|---|---|---|---|---|---|
| Technologien der virtuellen Produktentwicklung I | Lecture | 0536 L 400 | Winter semester | [de] | 2 | WS 2026/27 (1) ISIS |
| Technologien der virtuellen Produktentwicklung I | Exercise | 402 | Winter semester | [de] | 2 | WS 2026/27 (1) ISIS |
Courses in the course catalog
Courses created from the teaching units of this module.
Winter semester 2026/27 (2)
Technologien der virtuellen Produktentwicklung I (Lecture) 1
- Technologien der virtuellen Produktentstehung I (Vorlesung) Termingruppe 1 0536 L 400
Technologien der virtuellen Produktentwicklung I (Exercise) 1
- Technologien der virtuellen Produktentstehung I (Übung) Termingruppe 1 0536 L 402
Workload and credit points
Technologien der virtuellen Produktentwicklung I (Lecture)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Attendance time | 15 | 2 h | 30 h |
| Pre-/postpreparation | 15 | 4 h | 60 h |
| 90 h | |||
Technologien der virtuellen Produktentwicklung I (Exercise)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Attendance time | 15 | 2 h | 30 h |
| Pre-/postpreparation | 15 | 4 h | 60 h |
| 90 h | |||
The workload of the module adds up to 180 hours. The module therefore comprises 6 credit points.
Description of teaching and learning methods
Lecture (VL):
- Traditional lecture format with presentation of content and numerous practical examples
- Expert talks from industry professionals
Exercise (UE):
- Explanation of theoretical concepts and background, visualization, review, and discussion of lecture content using examples
- Presentation and solution approaches in groups, frontal teaching for all participants, followed by supervised work on exercises
- Traditional lecture format with presentation of content and numerous practical examples
- Expert talks from industry professionals
Exercise (UE):
- Explanation of theoretical concepts and background, visualization, review, and discussion of lecture content using examples
- Presentation and solution approaches in groups, frontal teaching for all participants, followed by supervised work on exercises
Requirements for participation and examination
Desirable prerequisites for participation in the courses:
a) Mandatory prerequisites:
None
b) Recommended prerequisites:
Prior knowledge of CAD modeling.
None
b) Recommended prerequisites:
Prior knowledge of CAD modeling.
Mandatory requirements for the module examination registration:
This module has no examination requirements.
Completion of the module
| Grading | Graded |
|---|---|
| Exam format | Portfolio examination |
| Type of portfolio examination | 100 points in total |
| Language | German |
Test elements
| Name | Points/Weight | Category | Duration/Extent |
|---|---|---|---|
| Documented Practical Performance Exercise: (Homework), 3 ECTS credits | 50 | practical | 3 Homeworks, distributed over the semester |
| Exam Lecture, 3 ECTS credits | 50 | written | 60 min |
Exam description
A maximum of 100 points can be achieved. The grading scale is as follows:
≥ 95 points → 1.0
≥ 90 points → 1.3
≥ 85 points → 1.7
≥ 80 points → 2.0
≥ 75 points → 2.3
≥ 70 points → 2.7
≥ 65 points → 3.0
≥ 60 points → 3.3
≥ 55 points → 3.7
≥ 50 points → 4.0
< 50 points → 5.0
≥ 95 points → 1.0
≥ 90 points → 1.3
≥ 85 points → 1.7
≥ 80 points → 2.0
≥ 75 points → 2.3
≥ 70 points → 2.7
≥ 65 points → 3.0
≥ 60 points → 3.3
≥ 55 points → 3.7
≥ 50 points → 4.0
< 50 points → 5.0
Duration of the module
The following number of semesters is estimated for taking and completing the module: 1 semester(s).
This module can be started in the following semesters: Winter semester.
Maximum number of participants
This module is not limited to a number of students.
Registration procedures
Registration for the course (Lecture and Exercise):
Via ISIS of TU Berlin (www.isis.tu-berlin.de). The assignment of project groups will take place in the ISIS course during the first lecture week.
Registration for the exam:
Details will be communicated in the ISIS course.
Via ISIS of TU Berlin (www.isis.tu-berlin.de). The assignment of project groups will take place in the ISIS course during the first lecture week.
Registration for the exam:
Details will be communicated in the ISIS course.
Recommended reading, lecture notes
Lecture notes
unavailable
Electronic lecture notes
available – https://www.tu.berlin/iit/studium-lehre/master/technologien-der-virtuellen-produktentstehung-i
Recommended literature
- Spur, G.; Krause, F.-L (1997): Das virtuelle Produkt. Carl Hanser Verlag München
- Stark, R. (2022): Virtual Product Creation in Industry. Springer-Verlag GmbH Germany
Assigned programs
This module version is used in the following programs:
| Program / program version | Semester(s) | Curriculum component |
|---|---|---|
| Aeronautics and Astronautics StuPO 2018 | WS 2025/26 | 1. Ingenieurwissenschaftliche Methoden › 1.1 Allgemeine und vertiefende ingenieurwissenschaftliche Methoden |
| SS 2026 | 1. Ingenieurwissenschaftliche Methoden › 1.1 Allgemeine und vertiefende ingenieurwissenschaftliche Methoden | |
| WS 2026/27 | 1. Ingenieurwissenschaftliche Methoden › 1.1 Allgemeine und vertiefende ingenieurwissenschaftliche Methoden | |
| Biomedical Engineering StuPO 2018 | WS 2025/26 | 2. Wahlpflichtmodule › 2.2 Ingenieurwissenschaftliche Vertiefungen |
| SS 2026 | 2. Wahlpflichtmodule › 2.2 Ingenieurwissenschaftliche Vertiefungen | |
| WS 2026/27 | 2. Wahlpflichtmodule › 2.2 Ingenieurwissenschaftliche Vertiefungen | |
| Computational Engineering Science (Informationstechnik im Maschinenwesen) StuPO 2018 | WS 2025/26 | 6. Schwerpunkte › 6.3 Konstruktion und Fertigung › 6.3.1 Konstruktion und Gestaltung |
| SS 2026 | 6. Schwerpunkte › 6.3 Konstruktion und Fertigung › 6.3.1 Konstruktion und Gestaltung | |
| WS 2026/27 | 6. Schwerpunkte › 6.3 Konstruktion und Fertigung › 6.3.1 Konstruktion und Gestaltung | |
| Computational Engineering Science (Informationstechnik im Maschinenwesen) StuPO 2018 (17.01.2018) | WS 2025/26 | 4. Profilbereich › 4.2 Profilbereich: Konstruktion und Fertigung › 4.2b Produktionstechnik |
| SS 2026 | 4. Profilbereich › 4.2 Profilbereich: Konstruktion und Fertigung › 4.2b Produktionstechnik | |
| WS 2026/27 | 4. Profilbereich › 4.2 Profilbereich: Konstruktion und Fertigung › 4.2b Produktionstechnik | |
| Industrial Engineering and Management Industrial Engineering and Management (B. Sc.) - StuPO 2015 | WS 2025/26 | Ingenieurwissenschaftliche Studienrichtungen › Maschinenbau (MB) › Maschinenbau (Wahlpflicht) |
| SS 2026 | Ingenieurwissenschaftliche Studienrichtungen › Verkehrswesen (VW) › Verkehrswesen (Wahlpflicht) | |
| WS 2026/27 | Ingenieurwissenschaftliche Studienrichtungen › Verkehrswesen (VW) › Verkehrswesen (Wahlpflicht) | |
| Mechanical Engineering StuPO 2017 | WS 2025/26 | Wahlpflichtmodule › Profilmodule › Informationstechnische und rechnergestützte Modellierung |
| SS 2026 | Wahlpflichtmodule › Profilmodule › Informationstechnische und rechnergestützte Modellierung | |
| WS 2026/27 | Wahlpflichtmodule › Profilmodule › Informationstechnische und rechnergestützte Modellierung | |
| Mechanical Engineering StuPO 2017 | WS 2025/26 | Wahlpflichtmodule › Schwerpunktmodule › Methodenorientierung › Informationstechnische und rechnerunterstützte Modellierung |
| SS 2026 | Wahlpflichtmodule › Schwerpunktmodule › Methodenorientierung › Informationstechnische und rechnerunterstützte Modellierung | |
| WS 2026/27 | Wahlpflichtmodule › Schwerpunktmodule › Methodenorientierung › Informationstechnische und rechnerunterstützte Modellierung | |
| Patent Engineering StuPO 2015 | WS 2025/26 | 2.2. Ingenieurwissenschaftliche Profilmodule › 2.2.2. Informationstechnische und rechnergestützte Modellierung |
| SS 2026 | 2.2. Ingenieurwissenschaftliche Profilmodule › 2.2.2. Informationstechnische und rechnergestützte Modellierung | |
| WS 2026/27 | 2.2. Ingenieurwissenschaftliche Profilmodule › 2.2.2. Informationstechnische und rechnergestützte Modellierung | |
| Production Engineering StuPO 2018 (09.05.2018) | WS 2025/26 | 4. Profilmodule › 4.2 Automatisierungs- und Informationstechnik |
| SS 2026 | 3. Informationstechnik | |
| WS 2026/27 | 3. Informationstechnik | |
| Technomathematics Technomathematics (M. Sc.) - StuPO 2014 | WS 2025/26 | Studienrichtungen › Maschinenbau › Maschinenbau › Profilmodule |
| SS 2026 | Studienrichtungen › Maschinenbau › Maschinenbau › Profilmodule | |
| WS 2026/27 | Studienrichtungen › Maschinenbau › Maschinenbau › Profilmodule | |
| Transport Systems StuPO 2018 | WS 2025/26 | A. Grundlagen › 2. Wahlpflichtbereich › 2.3.1 Informationstechnische Grundlagen |
| SS 2026 | A. Grundlagen › 2. Wahlpflichtbereich › 2.3.1 Informationstechnische Grundlagen | |
| WS 2026/27 | A. Grundlagen › 2. Wahlpflichtbereich › 2.3.1 Informationstechnische Grundlagen | |
| Vehicle Engineering StuPO 2017 | WS 2025/26 | 2. Profilmodule › 2.3 Ingenieurtechnische Grundlagen und Methoden |
| SS 2026 | 2. Profilmodule › 2.3 Ingenieurtechnische Grundlagen und Methoden | |
| WS 2026/27 | 2. Profilmodule › 2.3 Ingenieurtechnische Grundlagen und Methoden |
Eligible Study Programs:
- Bachelor Mechanical Engineering (Elective)
- Master Mechanical Engineering (Elective)
- Master Production Engineering (Elective)
- Master Biomedical Engineering (Elective)
- Bachelor Transport Systems (Elective)
- Master Transport Systems (Elective)
- Master Vehicle Engineering (Elective)
- Master Aeronautics and Astronautics (Elective)
- Bachelor Computational Engineering Science (Elective)
- Master Computational Engineering science (Elective)
- Bachelor Industrial Engineering and Management (Elective)
The module is open to all other students.
- Bachelor Mechanical Engineering (Elective)
- Master Mechanical Engineering (Elective)
- Master Production Engineering (Elective)
- Master Biomedical Engineering (Elective)
- Bachelor Transport Systems (Elective)
- Master Transport Systems (Elective)
- Master Vehicle Engineering (Elective)
- Master Aeronautics and Astronautics (Elective)
- Bachelor Computational Engineering Science (Elective)
- Master Computational Engineering science (Elective)
- Bachelor Industrial Engineering and Management (Elective)
The module is open to all other students.
Miscellaneous
Not specified