Technologies of virtual Product Development IIModule description #50607 / Version 4
- 6 CP
- Portfolio examination
- Graded
- Summer semester
- German
| Module / Version | #50607 / #4 |
|---|---|
| Validity | Since Summer semester 2025 |
| Available language(s) | English, German |
| Credit points | 6 |
| Person responsible for the module | Stark, Rainer |
| Grading | Graded |
| Exam format | Portfolio examination |
| Language(s) of instruction | German |
Affiliation
| Faculty | Fakultät V |
|---|---|
| Institute | Institut für Werkzeugmaschinen und Fabrikbetrieb (IWF) |
| Academic chair | 35361500 FG Industrielle Informationstechnik |
Contact
| Office | PTZ 4 |
|---|---|
| Contact person | Cintuglu, Burak Kaan |
| E-mail address | Lehre.TViProII@iit.tu-berlin.de |
| Website | https://www.tu.berlin/iit/studium-lehre/master/technologien-der-virtuellen-produktentstehung-ii |
Learning outcomes
Students should learn to assess the potential and techniques of information technology solutions for the development and simulation of complex products in an industrial environment and to use them in a goal-oriented manner.
In this context, recognizing the continuity of information technology solutions throughout the product development process plays a particularly important role. The course also teaches media-competent selection of appropriate information technology tools to solve engineering problems
In this context, recognizing the continuity of information technology solutions throughout the product development process plays a particularly important role. The course also teaches media-competent selection of appropriate information technology tools to solve engineering problems
Content
In the course, advanced knowledge of the following topics is conveyed:
Product Data Management Systems (PDM)
-Fundamentals of the functionalities of technical database and communication systems, as well as discussion of various exchange formats and data standards for information exchange.
Computer-Aided Engineering (CAE)
-Teaching theoretical foundations on topics such as digital mock-up, finite element method, virtual ergonomic analysis, as well as overarching system development using Systems Engineering (SE) and Model-Based Systems Engineering (MBSE).
Presentation of examples from industry.
Distributed Product Development
-Introduction to different collaboration models.
-Impact of societal, economic, and technological changes.
-Systems for cross-location and cross-company product development.
Product Data Management Systems (PDM)
-Fundamentals of the functionalities of technical database and communication systems, as well as discussion of various exchange formats and data standards for information exchange.
Computer-Aided Engineering (CAE)
-Teaching theoretical foundations on topics such as digital mock-up, finite element method, virtual ergonomic analysis, as well as overarching system development using Systems Engineering (SE) and Model-Based Systems Engineering (MBSE).
Presentation of examples from industry.
Distributed Product Development
-Introduction to different collaboration models.
-Impact of societal, economic, and technological changes.
-Systems for cross-location and cross-company product development.
Module components
Compulsory area
The following courses are mandatory for this module:
Workload and credit points
Technologien der virtuellen Produktentstehung II (Lecture)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Attendance time | 15 | 2 h | 30 h |
| pre-/postpreparation | 15 | 4 h | 60 h |
| 90 h | |||
Technologien der virtuellen Produktentstehung II (Exercise)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Attendance time | 15 | 2 h | 30 h |
| pre-/postpreparation | 15 | 4 h | 60 h |
| 90 h | |||
The workload of the module adds up to 180 hours. The module therefore comprises 6 credit points.
Description of teaching and learning methods
Teaching of the necessary specialized knowledge through lectures and deepening of the content in practical exercises.
Lecture (VL):
Presentation of theoretical content and background of the subject matter, illustration, review, and discussion of lecture topics using examples, presentation of problem-solving approaches, and frontal teaching for all participants.
Exercise (UE):
Supervised solving of exercise tasks with a focus on 1-D simulation of a window regulator system and FEM analysis of selected components under various load cases.
Lecture (VL):
Presentation of theoretical content and background of the subject matter, illustration, review, and discussion of lecture topics using examples, presentation of problem-solving approaches, and frontal teaching for all participants.
Exercise (UE):
Supervised solving of exercise tasks with a focus on 1-D simulation of a window regulator system and FEM analysis of selected components under various load cases.
Requirements for participation and examination
Desirable prerequisites for participation in the courses:
a) Mandatory Requirements:
None
b) Recommended Requirements:
Attendance of the module "Technologies of Virtual Product Development I"
Prior knowledge in CAD modeling.
None
b) Recommended Requirements:
Attendance of the module "Technologies of Virtual Product Development I"
Prior knowledge in CAD modeling.
Mandatory requirements for the module examination registration:
This module has no examination requirements.
Completion of the module
| Grading | Graded |
|---|---|
| Exam format | Portfolio examination |
| Type of portfolio examination | 100 points in total |
| Language | English, German |
Test elements
| Name | Points/Weight | Category | Duration/Extent |
|---|---|---|---|
| Documented Practical Performance Exercise: 3 ECTS Credits | 50 | practical | 90h |
| Exam Lecture: 60 minutes, 3 ECTS credits | 50 | written | 60 min |
Exam description
Grading: Graded
Examination Type: Portfolio Examination
A maximum of 100 points can be achieved:
≥ 95 points: 1.0
≥ 90 points: 1.3
≥ 85 points: 1.7
≥ 80 points: 2.0
≥ 75 points: 2.3
≥ 70 points: 2.7
≥ 65 points: 3.0
≥ 60 points: 3.3
≥ 55 points: 3.7
≥ 50 points: 4.0
< 50 points: 5.0
Examination Type: Portfolio Examination
A maximum of 100 points can be achieved:
≥ 95 points: 1.0
≥ 90 points: 1.3
≥ 85 points: 1.7
≥ 80 points: 2.0
≥ 75 points: 2.3
≥ 70 points: 2.7
≥ 65 points: 3.0
≥ 60 points: 3.3
≥ 55 points: 3.7
≥ 50 points: 4.0
< 50 points: 5.0
Duration of the module
The following number of semesters is estimated for taking and completing the module: 1 semester(s).
This module can be started in the following semesters: Summer semester.
Maximum number of participants
This module is not limited to a number of students.
Registration procedures
Registration for the Course (Lecture and Exercise):
ISIS teaching website of TU Berlin (www.isis.tu-berlin.de), assignment of project groups will take place on ISIS during the first week of lectures.
Registration for the Exam:
Through the respective Examination Office or via QISPOS. The registration deadlines can be found in the respective study regulations.
For the Oral Examination:
Schedule an appointment at the Secretariat PTZ 4.
Register with the responsible Examination Office.
Deadlines: The regulations of the respective examination regulations apply.
ISIS teaching website of TU Berlin (www.isis.tu-berlin.de), assignment of project groups will take place on ISIS during the first week of lectures.
Registration for the Exam:
Through the respective Examination Office or via QISPOS. The registration deadlines can be found in the respective study regulations.
For the Oral Examination:
Schedule an appointment at the Secretariat PTZ 4.
Register with the responsible Examination Office.
Deadlines: The regulations of the respective examination regulations apply.
Recommended reading, lecture notes
Lecture notes
unavailable
Electronic lecture notes
available – http://www.iit.tu-berlin.de
Recommended literature
No recommended literature given
Assigned programs
This module version is used in the following programs:
| Program / program version | Semester(s) | Curriculum component |
|---|---|---|
| Aeronautics and Astronautics StuPO 2018 | SS 2025 | 1. Ingenieurwissenschaftliche Methoden › 1.1 Allgemeine und vertiefende ingenieurwissenschaftliche Methoden |
| WS 2025/26 | 1. Ingenieurwissenschaftliche Methoden › 1.1 Allgemeine und vertiefende ingenieurwissenschaftliche Methoden | |
| SS 2026 | 1. Ingenieurwissenschaftliche Methoden › 1.1 Allgemeine und vertiefende ingenieurwissenschaftliche Methoden | |
| WS 2026/27 | 1. Ingenieurwissenschaftliche Methoden › 1.1 Allgemeine und vertiefende ingenieurwissenschaftliche Methoden | |
| Biomedical Engineering StuPO 2018 | SS 2025 | 2. Wahlpflichtmodule › 2.3 Informationstechnik |
| WS 2025/26 | 2. Wahlpflichtmodule › 2.3 Informationstechnik | |
| SS 2026 | 2. Wahlpflichtmodule › 2.3 Informationstechnik | |
| WS 2026/27 | 2. Wahlpflichtmodule › 2.3 Informationstechnik | |
| Computational Engineering Science (Informationstechnik im Maschinenwesen) StuPO 2018 (17.01.2018) | SS 2025 | 4. Profilbereich › 4.2 Profilbereich: Konstruktion und Fertigung › 4.2b Produktionstechnik |
| WS 2025/26 | 4. Profilbereich › 4.2 Profilbereich: Konstruktion und Fertigung › 4.2b Produktionstechnik | |
| SS 2026 | 4. Profilbereich › 4.2 Profilbereich: Konstruktion und Fertigung › 4.2b Produktionstechnik | |
| WS 2026/27 | 4. Profilbereich › 4.2 Profilbereich: Konstruktion und Fertigung › 4.2b Produktionstechnik | |
| Industrial Engineering and Management Industrial Engineering and Management (M. Sc.) - StuPO 2015 | SS 2025 | Ingenieurwissenschaftliche Studienrichtungen/Engineering Majors › Maschinenbau/Mechanical Engineering (MB) › Maschinenbau/Mechanical Engineering (Wahlpflicht/Compulsory-Elective) › Engineering Design |
| WS 2025/26 | Ingenieurwissenschaftliche Studienrichtungen/Engineering Majors › Maschinenbau/Mechanical Engineering (MB) › Maschinenbau/Mechanical Engineering (Wahlpflicht/Compulsory-Elective) › Engineering Design | |
| SS 2026 | Ingenieurwissenschaftliche Studienrichtungen/Engineering Majors › Maschinenbau/Mechanical Engineering (MB) › Maschinenbau/Mechanical Engineering (Wahlpflicht/Compulsory-Elective) › Engineering Design | |
| WS 2026/27 | Ingenieurwissenschaftliche Studienrichtungen/Engineering Majors › Maschinenbau/Mechanical Engineering (MB) › Maschinenbau/Mechanical Engineering (Wahlpflicht/Compulsory-Elective) › Engineering Design | |
| Industrial Engineering and Management Industrial Engineering and Management (M. Sc.) - StuPO 2026 | WS 2026/27 | Engineering Sciences / Specialization › Mechanical Engineering › Mechanical Engineering (Compulsory Electives) › Engineering Design |
| Mechanical Engineering StuPO 2017 | SS 2025 | Wahlpflichtmodule › Profilmodule › Informationstechnische und rechnergestützte Modellierung |
| WS 2025/26 | Wahlpflichtmodule › Profilmodule › Informationstechnische und rechnergestützte Modellierung | |
| SS 2026 | Wahlpflichtmodule › Profilmodule › Informationstechnische und rechnergestützte Modellierung | |
| WS 2026/27 | Wahlpflichtmodule › Profilmodule › Informationstechnische und rechnergestützte Modellierung | |
| Patent Engineering StuPO 2015 | SS 2025 | 2.2. Ingenieurwissenschaftliche Profilmodule › 2.2.2. Informationstechnische und rechnergestützte Modellierung |
| WS 2025/26 | 2.2. Ingenieurwissenschaftliche Profilmodule › 2.2.2. Informationstechnische und rechnergestützte Modellierung | |
| SS 2026 | 2.2. Ingenieurwissenschaftliche Profilmodule › 2.2.2. Informationstechnische und rechnergestützte Modellierung | |
| WS 2026/27 | 2.2. Ingenieurwissenschaftliche Profilmodule › 2.2.2. Informationstechnische und rechnergestützte Modellierung | |
| Production Engineering StuPO 2018 (09.05.2018) | SS 2025 | 4. Profilmodule › 4.2 Automatisierungs- und Informationstechnik |
| WS 2025/26 | 4. Profilmodule › 4.2 Automatisierungs- und Informationstechnik | |
| SS 2026 | 4. Profilmodule › 4.2 Automatisierungs- und Informationstechnik | |
| WS 2026/27 | 4. Profilmodule › 4.2 Automatisierungs- und Informationstechnik | |
| Technomathematics Technomathematics (M. Sc.) - StuPO 2014 | SS 2025 | Studienrichtungen › Maschinenbau › Maschinenbau › Profilmodule |
| WS 2025/26 | Studienrichtungen › Maschinenbau › Maschinenbau › Profilmodule | |
| SS 2026 | Studienrichtungen › Maschinenbau › Maschinenbau › Profilmodule | |
| WS 2026/27 | Studienrichtungen › Maschinenbau › Maschinenbau › Profilmodule | |
| Vehicle Engineering StuPO 2017 | SS 2025 | 2. Profilmodule › 2.3 Ingenieurtechnische Grundlagen und Methoden |
| WS 2025/26 | 2. Profilmodule › 2.3 Ingenieurtechnische Grundlagen und Methoden | |
| SS 2026 | 2. Profilmodule › 2.3 Ingenieurtechnische Grundlagen und Methoden | |
| WS 2026/27 | 2. Profilmodule › 2.3 Ingenieurtechnische Grundlagen und Methoden |
Suitable Degree Programs:
Master's in Mechanical Engineering (Elective)
Master's in Production Engineering (Elective)
Master's in Biomedical Engineering (Elective)
Master's in Transport Engineering (Elective)
Master's in Automotive Engineering (Elective)
Master's in Aerospace Engineering (Elective)
Master's in Information Technology in Mechanical Engineering (Elective)
Master's in Industrial Engineering - Mechanical Engineering (Elective)
Master's in Mechanical Engineering (Elective)
Master's in Production Engineering (Elective)
Master's in Biomedical Engineering (Elective)
Master's in Transport Engineering (Elective)
Master's in Automotive Engineering (Elective)
Master's in Aerospace Engineering (Elective)
Master's in Information Technology in Mechanical Engineering (Elective)
Master's in Industrial Engineering - Mechanical Engineering (Elective)
Miscellaneous
Information about the literature will be provided during the lecture.