Skip to content
Technische Universität Berlin Deutsch
Course catalog and module transfer system

Virtual Engineering in IndustryModule description #50637 / Version 7

← Module page Deutsche Fassung
Module / Version#50637 / #7
ValiditySince Summer semester 2026
Available language(s)English, German
Credit points6
Person responsible for the moduleStark, Rainer
GradingGraded
Exam formatPortfolio examination
Language(s) of instructionEnglish

Affiliation

FacultyFakultät V
InstituteInstitut für Werkzeugmaschinen und Fabrikbetrieb (IWF)
Academic chair35361500 FG Industrielle Informationstechnik

Contact

OfficePTZ 4
Contact personCintuglu, Burak Kaan
E-mail addressLehre.VEI@iit.tu-berlin.de
Websitehttps://www.tu.berlin/iit/studium-lehre/master/virtual-engineering-in-industry

Learning outcomes

Participants of this course learn product modeling, model analysis, and information management within the engineering process using various methods and tools of systems engineering. They gain competencies in Model-Based Systems Engineering (MBSE), focusing on creating and managing system models to support the requirements, design, analysis, verification, and validation activities throughout the development lifecycle.

The classical RFLP (Requirements, Functional, Logical, Physical) method is combined with advanced model-based Systems Engineering methods (Magic Grid) to enable students to learn the importance of seamless and cross-model development across different levels of abstraction.

The course, conducted in English and utilizing realistic industrial project management instruments, offers a deep insight into the challenges of real industrial life. Participants will develop skills in using MBSE frameworks and tools such as SysML (Systems Modeling Language) to define, analyze, and maintain complex systems.
Working in multidisciplinary project teams on an advanced product development project, participants will integrate high-end CAD systems with CAE verification and employ MBSE methodologies. They will learn to use system models to ensure consistency and traceability across different engineering disciplines, enabling better decision-making and collaboration. Additionally, the course covers techniques for requirements engineering, system architecture modeling, functional and physical decomposition, and system validation and verification within the MBSE approach.

With the department's own 3D printers and various Arduino sensors and actuators, students will be able to transform their virtual prototypes into real prototypes and test them. This allows students to go through the entire V of the V-Model, ultimately creating a self-developed mechatronic prototype by the end of the course.

Content

This course covers techniques in requirements management, project management, and advanced CAE methods. These include, in particular, the design of CAD assemblies, the simulation of behavioral models, as well as the creation of functional, logical, and physical architectures.

To deliver the course content, Dassault Systèmes' cloud-based development platform "3DExperience" is used. This enables the integration of all disciplines and teaching content within a consistent and traceable environment, ensuring that the primary benefits of the MBSE approach can be optimally taught

Module components

Compulsory area

The following courses are mandatory for this module:

CoursesTypeNumberFrequencyLanguageHours per weekCourse catalog
Virtual Engineering in IndustryIntegrated course Winter semester[de]4 ISIS

Courses in the course catalog

Courses created from the teaching units of this module.

Winter semester 2026/27 (1)

Virtual Engineering in Industry (Integrated course) 1

All groups of this course in the catalog

Workload and credit points

Virtual Engineering in Industry (Integrated course)

Workload descriptionMultiplierHoursTotal
Attendance time152 h30 h
Project work1510 h150 h
180 h

The workload of the module adds up to 180 hours. The module therefore comprises 6 credit points.

Description of teaching and learning methods

Necessary domain specific knowledge will be taught within a block course at the beginning of the semester through interplay of lectures and practical exercises.
Internalization of methods and knowledge will be achieved through an independent project work within an industrial use case scenario. Preparation and conduction of design reviews is part of this course.

Assistance of participants through active coaching and workshops.

Requirements for participation and examination

Desirable prerequisites for participation in the courses:

Students must have fundamental experience in CAD-modeling (eg. ProEngineer, NX, CATIA or equivalent) and knowledge of IT-Basics (MS Office);
Knowledge about and skills within product data management software and engineering experience is useful.

Mandatory requirements for the module examination registration:

This module has no examination requirements.

Completion of the module

GradingGraded
Exam formatPortfolio examination
Type of portfolio examination100 points in total
LanguageEnglish

Test elements

NamePoints/WeightCategoryDuration/Extent
Project Work, 5LP83practicalApproximately 150 hours in total, project work, two presentations and a final presentation (each about 45 minutes), final project report
Test 30 min, 1LP17written30 min

Exam description

A maximum of 100 points can be achieved.
More or equal to 95 points ... 1.0
More than or equal to 90 points ... 1.3
More than or equal to 85 points ... 1.7
More than or equal to 80 points ... 2.0
More than or equal to 75 points ... 2.3
More than or equal to 70 points ... 2.7
More than or equal to 65 points ... 3.0
More than or equal to 60 points ... 3.3
More than or equal to 55 points ... 3.7
More than or equal to 50 points ... 4.0
Less than 50 points ... 5.0

Duration of the module

The following number of semesters is estimated for taking and completing the module: 1 semester(s).

This module can be started in the following semesters: Winter semester.

Maximum number of participants

This module is not limited to a number of students.

Registration procedures

Course Registration (Lecture and Exercise):
Via the ISIS learning portal of TU Berlin (www.isis.tu-berlin.de).
The assignment of project teams takes place on ISIS during the first two weeks of lectures.

Exam Registration:
At the respective examination office or via Moses. The registration deadlines are specified in the relevant study and examination regulations.

Recommended reading, lecture notes

Lecture notes

unavailable

Electronic lecture notes

available – http://www.iit.tu-berlin.de; https://www.isis.tu-berlin.de/

Recommended literature

  • Engineering Design: A Systematic Approach, ISBN-10: 1846283183
  • Krause, F.-L. (2007). The Future of Product Development. Berlin: Springer.
  • MagicGrid® BOOK OF KNOWLEDGE, A Practical Guide to Systems Modeling using MagicGrid from Dassault Systèmes2nd editionMagicgrid Book of Knowledge, ISBN 978-609-454-554-2

Assigned programs

This module version is used in the following programs:

Program / program versionSemester(s)Curriculum component
Computational Engineering Science (Informationstechnik im Maschinenwesen)
StuPO 2018 (17.01.2018)
SS 20264. Profilbereich › 4.2 Profilbereich: Konstruktion und Fertigung › 4.2b Produktionstechnik
WS 2026/274. Profilbereich › 4.2 Profilbereich: Konstruktion und Fertigung › 4.2b Produktionstechnik
Industrial Engineering and Management
Industrial Engineering and Management (M. Sc.) - StuPO 2015
SS 2026Ingenieurwissenschaftliche Studienrichtungen/Engineering Majors › Maschinenbau/Mechanical Engineering (MB) › Maschinenbau/Mechanical Engineering (Wahlpflicht/Compulsory-Elective) › Engineering Design
WS 2026/27Ingenieurwissenschaftliche Studienrichtungen/Engineering Majors › Maschinenbau/Mechanical Engineering (MB) › Maschinenbau/Mechanical Engineering (Wahlpflicht/Compulsory-Elective) › Engineering Design
Industrial Engineering and Management
Industrial Engineering and Management (M. Sc.) - StuPO 2026
WS 2026/27Engineering Sciences / Specialization › Mechanical Engineering › Mechanical Engineering (Compulsory Electives) › Engineering Design
Mechanical Engineering
StuPO 2017
SS 2026Wahlpflichtmodule › Profilmodule › Informationstechnische und rechnergestützte Modellierung
WS 2026/27Wahlpflichtmodule › Profilmodule › Informationstechnische und rechnergestützte Modellierung
Patent Engineering
StuPO 2015
SS 20262.2. Ingenieurwissenschaftliche Profilmodule › 2.2.2. Informationstechnische und rechnergestützte Modellierung
WS 2026/272.2. Ingenieurwissenschaftliche Profilmodule › 2.2.2. Informationstechnische und rechnergestützte Modellierung
Production Engineering
StuPO 2018 (09.05.2018)
SS 20264. Profilmodule › 4.2 Automatisierungs- und Informationstechnik
WS 2026/274. Profilmodule › 4.2 Automatisierungs- und Informationstechnik
Technomathematics
Technomathematics (M. Sc.) - StuPO 2014
SS 2026Studienrichtungen › Maschinenbau › Maschinenbau › Profilmodule
WS 2026/27Studienrichtungen › Maschinenbau › Maschinenbau › Profilmodule
Vehicle Engineering
StuPO 2017
SS 20262. Profilmodule › 2.3 Ingenieurtechnische Grundlagen und Methoden
WS 2026/272. Profilmodule › 2.3 Ingenieurtechnische Grundlagen und Methoden
Suitable Degree Programs:

Master of Mechanical Engineering (Elective)
Master of Production Engineering (Elective)
Master of Information Technology in Mechanical Engineering (Elective)
Master of Automotive Engineering (Elective)
Master of Aerospace Engineering (Elective)
Master of Industrial Engineering in Mechanical Engineering (Elective)

The module is open to all other students.

Miscellaneous

This course is predominantly offered for master's students in higher semesters.
This course can also be credited as the project "Virtual Product Development Project" with the module number #50530.