Control of Mechatronic SystemsModule description #50705 / Version 4
- 6 CP
- Portfolio examination
- Graded
- Summer semester
- German
| Module / Version | #50705 / #4 |
|---|---|
| Validity | Since Summer semester 2026 |
| Available language(s) | English, German |
| Credit points | 6 |
| Person responsible for the module | Maas, Jürgen |
| Grading | Graded |
| Exam format | Portfolio examination |
| Language(s) of instruction | German |
Affiliation
| Faculty | Fakultät V |
|---|---|
| Institute | Institut für Maschinenkonstruktion und Systemtechnik (IMS) |
| Academic chair | 35351400 FG Elektromechanische Konstruktionen |
Contact
| Office | EW 3 |
|---|---|
| Contact person | Maas, Jürgen |
| E-mail address | juergen.maas@tu-berlin.de |
| Website | http://www.emk.tu-berlin.de |
Learning outcomes
After successfully completing the module, students are able to:
- tackle control engineering problems that go far beyond the classical design methods for linear, time-invariant single-input single-output systems and are particularly relevant for mechatronic systems.
- analyze the behavior of multi-variable and nonlinear systems, and apply valid model modifications (simplifications/linearizations) and transformations for controller design.
- independently design complex and nonlinear control systems, including for new, previously unaddressed multi-variable and nonlinear systems.
- optimize and implement the controllers designed in theory, and test them through simulation and experiments using examples from mechatronics.
- tackle control engineering problems that go far beyond the classical design methods for linear, time-invariant single-input single-output systems and are particularly relevant for mechatronic systems.
- analyze the behavior of multi-variable and nonlinear systems, and apply valid model modifications (simplifications/linearizations) and transformations for controller design.
- independently design complex and nonlinear control systems, including for new, previously unaddressed multi-variable and nonlinear systems.
- optimize and implement the controllers designed in theory, and test them through simulation and experiments using examples from mechatronics.
Content
- Design of advanced state feedback controllers and observers to account for disturbances and nonlinear system behavior
- Design of multivariable control systems in the time and frequency domains
- Linearization methods for nonlinear control plants (operating-point linearization, harmonic balance, exact linearization)
- Design methods for switching controllers in the phase plane (variable structure control, sliding-mode control)
- Implementation and simulation of complex control systems for mechatronic applications
- Experimental validation of complex controllers using mechatronic test rigs
- Design of multivariable control systems in the time and frequency domains
- Linearization methods for nonlinear control plants (operating-point linearization, harmonic balance, exact linearization)
- Design methods for switching controllers in the phase plane (variable structure control, sliding-mode control)
- Implementation and simulation of complex control systems for mechatronic applications
- Experimental validation of complex controllers using mechatronic test rigs
Module components
Compulsory area
The following courses are mandatory for this module:
| Courses | Type | Number | Frequency | Language | Hours per week | Course catalog |
|---|---|---|---|---|---|---|
| Regelung Mechatronischer Systeme | Integrated course | 3535 L 019 | Summer semester | [de] | 4 | ISIS |
Workload and credit points
Regelung Mechatronischer Systeme (Integrated course)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Completing homework | 5 | 6 h | 30 h |
| Attendance | 15 | 4 h | 60 h |
| Exam preparation | 1 | 30 h | 30 h |
| Preparation/Follow-up | 15 | 4 h | 60 h |
| 180 h | |||
The workload of the module adds up to 180 hours. The module therefore comprises 6 credit points.
Description of teaching and learning methods
The integrated course consists of in-person sessions and asynchronous online components and teaches, in the lecture part, methods for designing complex control systems. These methods are reinforced and experimentally applied in exercises using practice-oriented mechatronics examples.
The application of synthesis methods to specific problems is carried out interactively in small student groups. In addition to analytical design methods, computer-aided design tools such as MATLAB/Simulink are used, and the designed controllers are validated through simulations and experiments on real test setups using dSPACE real-time systems.
For this purpose, exercises are assigned that students must first solve independently as graded homework within a portfolio assessment, including software implementation where required. These graded exercises serve as preparation for the experiments conducted on the mechatronic test setups.
The application of synthesis methods to specific problems is carried out interactively in small student groups. In addition to analytical design methods, computer-aided design tools such as MATLAB/Simulink are used, and the designed controllers are validated through simulations and experiments on real test setups using dSPACE real-time systems.
For this purpose, exercises are assigned that students must first solve independently as graded homework within a portfolio assessment, including software implementation where required. These graded exercises serve as preparation for the experiments conducted on the mechatronic test setups.
Requirements for participation and examination
Desirable prerequisites for participation in the courses:
a) Mandatory: “Fundamentals of Control Engineering” or a similar module
b) Recommended: Basics of MATLAB/Simulink, fundamentals of state-space representation and state feedback control
b) Recommended: Basics of MATLAB/Simulink, fundamentals of state-space representation and state feedback control
Mandatory requirements for the module examination registration:
This module has no examination requirements.
Completion of the module
| Grading | Graded |
|---|---|
| Exam format | Portfolio examination |
| Type of portfolio examination | 100 points in total |
| Language | German |
Test elements
| Name | Points/Weight | Category | Duration/Extent |
|---|---|---|---|
| Homework | 20 | flexibel | 6 h per homework assignment |
| Laboratory and report | 20 | written | each session: 90 min and 2 h |
| Final test | 60 | written | 60 minutes |
Exam description
Throughout the semester, homework assignments are completed to prepare for the laboratory exercises, contributing a total of 20 points. The partial assessment for the lab and reports, also worth 20 points, requires each student to participate in four different laboratory sessions during the semester. In these sessions, individual lab exercises are conducted in small groups, followed by the preparation of reports.
The final exam covers all topics and is worth 60 points. The total achievable score is 100 points.
The final exam covers all topics and is worth 60 points. The total achievable score is 100 points.
Duration of the module
The following number of semesters is estimated for taking and completing the module: 1 semester(s).
This module can be started in the following semesters: Summer semester.
Maximum number of participants
The maximum capacity of participants is 40.
Registration procedures
Registration takes place during the first week of lectures via the ISIS system. Official exam registration must be completed before the first assessment.
Recommended reading, lecture notes
Lecture notes
unavailable
Electronic lecture notes
available – https://www.isis.tu-berlin.de
Recommended literature
- Edwards, C. und S. K. Spurgeon: Sliding Mode Control - Theory and Applications. Taylor & Francis, 1998.
- Föllinger, O: Nichtlineare Regelungen. Bd.1 und 2 Oldenbourg, 2001.
- Föllinger, Otto: Regelungstechnik - Einführung in die Methoden und ihre Anwendung, VED-Verlag
- Isermann, R.: Identifikation dynamischer Systeme: Grundlegende Methoden. 2. Aufl. Springer, 2011.
- Isermann, R.: Mechatronische Systeme. Grundlagen. Springer, 2008.
- Unbehauen, H.: Regelungstechnik. Bd. 1-3. Vieweg.
Assigned programs
This module version is used in the following programs:
| Program / program version | Semester(s) | Curriculum component |
|---|---|---|
| Biomedical Engineering StuPO 2018 | WS 2026/27 | 2. Wahlpflichtmodule › 2.2 Ingenieurwissenschaftliche Vertiefungen |
| Computational Engineering Science (Informationstechnik im Maschinenwesen) StuPO 2018 (17.01.2018) | SS 2026 | 3. Kernbereich: Messen, Steuern, Regeln |
| WS 2026/27 | 3. Kernbereich: Messen, Steuern, Regeln | |
| Engineering Science StuPO 2020 | SS 2026 | 2.3 Mechatronik › 2.3b Ergänzungsbereich |
| WS 2026/27 | 2.3 Mechatronik › 2.3a Kernbereich | |
| Mechanical Engineering StuPO 2017 | SS 2026 | Wahlpflichtmodule › Profilmodule › Mess- und Automatisierungstechnik |
| WS 2026/27 | Wahlpflichtmodule › Profilmodule › Mess- und Automatisierungstechnik | |
| Patent Engineering StuPO 2015 | WS 2026/27 | 2.1. Ingenieurwissenschaftliche Kernmodule › 2.1.3. Mikrotechnik und Mechatronik |
| Vehicle Engineering StuPO 2017 | SS 2026 | 2. Profilmodule › 2.3 Ingenieurtechnische Grundlagen und Methoden |
| WS 2026/27 | 2. Profilmodule › 2.3 Ingenieurtechnische Grundlagen und Methoden |
Miscellaneous
Not specified