Digital Control EngineeringModule description #50706 / Version 4
- 6 CP
- Portfolio examination
- Graded
- Winter semester
- German
| Module / Version | #50706 / #4 |
|---|---|
| Validity | Since Winter semester 2026/27 |
| Available language(s) | English, German |
| Credit points | 6 |
| Person responsible for the module | Maas, Jürgen |
| Grading | Graded |
| Exam format | Portfolio examination |
| Language(s) of instruction | German |
Affiliation
| Faculty | Fakultät V |
|---|---|
| Institute | Institut für Maschinenkonstruktion und Systemtechnik (IMS) |
| Academic chair | 35351400 FG Elektromechanische Konstruktionen |
Contact
| Office | EW 3 |
|---|---|
| Contact person | Maas, Jürgen |
| E-mail address | juergen.maas@tu-berlin.de |
| Website | http://www.emk.tu-berlin.de |
Learning outcomes
Upon successful completion of the module, students will be able to:
- address control engineering problems while taking into account digital system components and discrete-time system properties.
- apply the methods developed in the course for the design of discrete-time controllers to new control problems, further develop these methods where appropriate, formally describe the resulting control algorithms, and validate them through both simulation and experimental testing.
- implement the designed controllers using the Rapid Control Prototyping (RCP) and Hardware-in-the-Loop (HIL) approaches for prototypical development and testing on real-time systems.
- transfer and further develop the acquired knowledge for application to other systems.
- address control engineering problems while taking into account digital system components and discrete-time system properties.
- apply the methods developed in the course for the design of discrete-time controllers to new control problems, further develop these methods where appropriate, formally describe the resulting control algorithms, and validate them through both simulation and experimental testing.
- implement the designed controllers using the Rapid Control Prototyping (RCP) and Hardware-in-the-Loop (HIL) approaches for prototypical development and testing on real-time systems.
- transfer and further develop the acquired knowledge for application to other systems.
Content
- Introduction to discrete-time control systems, components of digital control loops, architecture and operation of digital electronics and real-time systems, sampling theorem, and real-time operating systems.
- Mathematical description of discrete-time control systems and the associated signal properties (difference equations, z-transform, discrete transfer functions, and discrete-time state-space models).
- Design methods for discrete-time controllers:
- quasi-continuous design methods based on classical time-domain and frequency-domain control design techniques,
- dedicated design methods for discrete-time control, including the root locus method and digital magnitude optimum in the z-domain, as well as discrete-time state-feedback controllers and state observers.
- Methods for real-time parameter and state estimation (e.g., recursive (extended) least squares (R(E)LS) methods and the discrete-time Kalman filter), for example in adaptive control applications.
- Function approximation using neural networks, grey-box system modeling based on machine learning, and the application of artificial intelligence for estimation and control.
- Rapid Control Prototyping (RCP) methods for the fast development and experimental validation of discrete-time controllers using MATLAB/Simulink and real-time systems.
- Hardware-in-the-Loop (HIL) simulation methods for emulating real-world environments to evaluate mechatronic components.
- Intensive computer-based exercises combined with laboratory experiments using real-time systems from dSPACE, which can be programmed and operated directly from MATLAB/Simulink.
- Mathematical description of discrete-time control systems and the associated signal properties (difference equations, z-transform, discrete transfer functions, and discrete-time state-space models).
- Design methods for discrete-time controllers:
- quasi-continuous design methods based on classical time-domain and frequency-domain control design techniques,
- dedicated design methods for discrete-time control, including the root locus method and digital magnitude optimum in the z-domain, as well as discrete-time state-feedback controllers and state observers.
- Methods for real-time parameter and state estimation (e.g., recursive (extended) least squares (R(E)LS) methods and the discrete-time Kalman filter), for example in adaptive control applications.
- Function approximation using neural networks, grey-box system modeling based on machine learning, and the application of artificial intelligence for estimation and control.
- Rapid Control Prototyping (RCP) methods for the fast development and experimental validation of discrete-time controllers using MATLAB/Simulink and real-time systems.
- Hardware-in-the-Loop (HIL) simulation methods for emulating real-world environments to evaluate mechatronic components.
- Intensive computer-based exercises combined with laboratory experiments using real-time systems from dSPACE, which can be programmed and operated directly from MATLAB/Simulink.
Module components
Compulsory area
The following courses are mandatory for this module:
| Courses | Type | Number | Frequency | Language | Hours per week | Course catalog |
|---|---|---|---|---|---|---|
| Digitale Regelungen | Integrated course | 3535 L 032 | Winter semester | [de] | 4 | WS 2026/27 (1) ISIS |
Courses in the course catalog
Courses created from the teaching units of this module.
Winter semester 2026/27 (1)
Digitale Regelungen (Integrated course) 1
- Digitale Regelungen (Integrierte Veranstaltung) Termingruppe 1 3535 L 032
Workload and credit points
Digitale Regelungen (Integrated course)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Completion of assigned homework | 5 | 6 h | 30 h |
| Contact hours | 15 | 4 h | 60 h |
| Exam preparation | 1 | 30 h | 30 h |
| Preparation and review | 15 | 4 h | 60 h |
| 180 h | |||
The workload of the module adds up to 180 hours. The module therefore comprises 6 credit points.
Description of teaching and learning methods
The integrated course builds on the fundamentals of control engineering and, in its lecture component, covers digital real-time systems as well as methods for the design of discrete-time controllers and state and parameter estimation techniques, including approaches for adaptive control. In the tutorial and laboratory sessions, these concepts are explored in greater depth through analytical, computer-based, and experimental exercises using practical examples.
The application of these methods to specific control engineering problems is carried out interactively in small groups. Computer-aided design tools such as MATLAB/Simulink are used to develop controllers, which are subsequently validated through simulations and experiments on real mechatronic test rigs using Rapid Control Prototyping (RCP) and Hardware-in-the-Loop (HIL) techniques with MATLAB/Simulink and connected dSPACE real-time systems.
To support this process, students are provided with assignments that must first be completed independently as graded homework and software implementations as part of a portfolio assessment. These graded assignments serve as preparation for the experimental work on the mechatronic test rigs. In addition, students are required to prepare and deliver presentations covering both the execution of the experiments and the analysis and discussion of the experimental results.
The application of these methods to specific control engineering problems is carried out interactively in small groups. Computer-aided design tools such as MATLAB/Simulink are used to develop controllers, which are subsequently validated through simulations and experiments on real mechatronic test rigs using Rapid Control Prototyping (RCP) and Hardware-in-the-Loop (HIL) techniques with MATLAB/Simulink and connected dSPACE real-time systems.
To support this process, students are provided with assignments that must first be completed independently as graded homework and software implementations as part of a portfolio assessment. These graded assignments serve as preparation for the experimental work on the mechatronic test rigs. In addition, students are required to prepare and deliver presentations covering both the execution of the experiments and the analysis and discussion of the experimental results.
Requirements for participation and examination
Desirable prerequisites for participation in the courses:
Recommended prerequisites for participation in the course:
a) Mandatory: Fundamentals of Control Engineering or an equivalent module.
b) Recommended: Basic knowledge of MATLAB/Simulink, state-space modeling, and state-feedback control.
Mandatory prerequisites for registration for the module examination:
There are no mandatory prerequisites for registration for the module examination.
a) Mandatory: Fundamentals of Control Engineering or an equivalent module.
b) Recommended: Basic knowledge of MATLAB/Simulink, state-space modeling, and state-feedback control.
Mandatory prerequisites for registration for the module examination:
There are no mandatory prerequisites for registration for the module examination.
Mandatory requirements for the module examination registration:
This module has no examination requirements.
Completion of the module
| Grading | Graded |
|---|---|
| Exam format | Portfolio examination |
| Type of portfolio examination | 100 points in total |
| Language | German |
Test elements
| Name | Points/Weight | Category | Duration/Extent |
|---|---|---|---|
| Homework assignments in preparation for the laboratory experiments | 20 | flexibel | 6 hours per homework assignment |
| Laboratory and laboratory report | 20 | flexibel | 90 minutes and 2 hours each |
| Final test | 60 | written | 60 |
Exam description
Throughout the semester, students complete preparatory homework assignments for the laboratory sessions, contributing a total of 20 points. The laboratory and laboratory report component, worth 20 points, requires each student to participate in four different laboratory sessions during the semester. These sessions consist of individual laboratory exercises conducted in small groups, followed by the preparation of laboratory reports. The final quiz, covering all topics of the module, is worth 60 points. The maximum achievable score for the module is 100 points.
Duration of the module
The following number of semesters is estimated for taking and completing the module: 1 semester(s).
This module can be started in the following semesters: Winter semester.
Maximum number of participants
The maximum capacity of participants is 60.
Registration procedures
Registration takes place via the ISIS system.
Recommended reading, lecture notes
Lecture notes
unavailable
Electronic lecture notes
available – https://www.isis.tu-berlin.de
Recommended literature
- Föllinger, Otto: Regelungstechnik - Einführung in die Methoden und ihre Anwendung, VDE-Verlag
- Föllinger: Lineare Abtastsysteme, DeGruyter 2014.
- Isermann: Identifikation dynamischer Systeme, Springer 2016
- Unbehauen, H.: Regelungstechnik. Bd. 1-3. Vieweg.
Assigned programs
This module version is used in the following programs:
| Program / program version | Semester(s) | Curriculum component |
|---|---|---|
| Aeronautics and Astronautics StuPO 2018 | WS 2026/27 | 1. Ingenieurwissenschaftliche Methoden › 1.4 Regelungstechnik, Elektronik und Software-Engineering |
| Engineering Science StuPO 2020 | WS 2026/27 | 2.3 Mechatronik › 2.3b Ergänzungsbereich |
Dieses Modul ist geeignet für die Studiengänge:
Biomedizinische Technik (Master of Science)
Computational Engineering Science (ITM) (Master of Science)
Computational Engineering Science (ITM) (Bachelor of Science)
Maschinenbau (Master of Science)
Maschinenbau (Bachelor of Science)
Patentingenieurwesen (Master of Science)
Physikalische Ingenieurwissenschaft (Master of Science)
Physikalische Ingenieurwissenschaft (Bachelor of Science)
Fahrzeugtechnik (Master of Science)
Biomedizinische Technik (Master of Science)
Computational Engineering Science (ITM) (Master of Science)
Computational Engineering Science (ITM) (Bachelor of Science)
Maschinenbau (Master of Science)
Maschinenbau (Bachelor of Science)
Patentingenieurwesen (Master of Science)
Physikalische Ingenieurwissenschaft (Master of Science)
Physikalische Ingenieurwissenschaft (Bachelor of Science)
Fahrzeugtechnik (Master of Science)
Miscellaneous
Not specified