Medical engineering 1Module description #50788 / Version 8
- 6 CP
- Portfolio examination
- Graded
- Winter semester
- German
| Module / Version | #50788 / #8 |
|---|---|
| Validity | Since Winter semester 2026/27 |
| Available language(s) | English, German |
| Credit points | 6 |
| Person responsible for the module | Kraft, Marc |
| Grading | Graded |
| Exam format | Portfolio examination |
| Language(s) of instruction | German |
Affiliation
| Faculty | Fakultät V |
|---|---|
| Institute | Institut für Maschinenkonstruktion und Systemtechnik (IMS) |
| Academic chair | 35351600 FG Medizintechnik |
Contact
| Office | SG 11 |
|---|---|
| Contact person | Kraft, Marc |
| E-mail address | medtech-TB-lehre@win.tu-berlin.de |
| Website | https://www.tu.berlin/medtech/studium-lehre/lehrveranstaltungen/wintersemester/medizintechnik-1 |
Learning outcomes
Graduates of this module have knowledge of the function, design, development and use of a fundamental part of medical devices and instruments for diagnosis and therapy.
They are familiar with the technical implementation of these devices, taking into account the special safety aspects of the interaction of technical systems with the human body.
The historical development of the systems and procedures as well as their current social significance in an economic and ecological context will be explained.
The aim is to familiarise participants with the relevance of sustainable medical device development (over the entire product life cycle) and to train them in the ethical and responsible use of resources and patients.
They are familiar with the technical implementation of these devices, taking into account the special safety aspects of the interaction of technical systems with the human body.
The historical development of the systems and procedures as well as their current social significance in an economic and ecological context will be explained.
The aim is to familiarise participants with the relevance of sustainable medical device development (over the entire product life cycle) and to train them in the ethical and responsible use of resources and patients.
Content
- Quality management and information on risk management
- High-frequency surgery
- Minimally invasive surgery
- Reprocessing of medical devices
- Photometry
- Biocompatibility
- Gastroenterological techniques
- Use of medical technology in the clinic
- Authorisation and development of medical devices (overview)
- Joint implants
- Endoscopy
- Ultrasound diagnostics
- Radiological imaging
- Magnetic resonance imaging
- Navigation and robotics in medicine
- High-frequency surgery
- Minimally invasive surgery
- Reprocessing of medical devices
- Photometry
- Biocompatibility
- Gastroenterological techniques
- Use of medical technology in the clinic
- Authorisation and development of medical devices (overview)
- Joint implants
- Endoscopy
- Ultrasound diagnostics
- Radiological imaging
- Magnetic resonance imaging
- Navigation and robotics in medicine
Module components
Compulsory area
The following courses are mandatory for this module:
| Courses | Type | Number | Frequency | Language | Hours per week | Course catalog |
|---|---|---|---|---|---|---|
| Medizintechnik 1 | Lecture | Winter semester | [de] | 4 | WS 2026/27 (2) ISIS |
Courses in the course catalog
Courses created from the teaching units of this module.
Winter semester 2026/27 (2)
Medizintechnik 1 (Lecture) 2
- Medizintechnik 1 (Vorlesung) Termingruppe 1
- Medizintechnik 1 (Vorlesung) Termingruppe 2
Workload and credit points
Medizintechnik 1 (Lecture)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Attendance | 15 | 4 h | 60 h |
| Pre/post processing | 15 | 8 h | 120 h |
| 180 h | |||
The workload of the module adds up to 180 hours. The module therefore comprises 6 credit points.
Description of teaching and learning methods
Knowledge is primarily imparted in lectures using practical examples and demonstrations. The knowledge imparted is deepened and applied independently through active participation in research-relevant topics.
Requirements for participation and examination
Desirable prerequisites for participation in the courses:
Very good knowledge of German
Medical basics for engineers
Basic knowledge of chemistry and physics
Medical basics for engineers
Basic knowledge of chemistry and physics
Mandatory requirements for the module examination registration:
This module has no examination requirements.
Completion of the module
| Grading | Graded |
|---|---|
| Exam format | Portfolio examination |
| Type of portfolio examination | 100 points in total |
| Language | German |
Test elements
| Name | Points/Weight | Category | Duration/Extent |
|---|---|---|---|
| Written test | 85 | written | 59 minutes |
| Task during the semester | 15 | practical | see exam description |
Exam description
The examination consists of a task in groups of three during the semester, which is presented as part of a lecture, as well as a written test at the end of the semester. The assignment during the semester varies from semester to semester and is intended to teach students how to use scientific methods in addition to the content-related aspects. The student groups work on a topic that they are expected to have worked on by a set deadline. The work can take the form of a short paper (approx. 5-10 pages), a presentation (approx. 10-15 minutes), a poster (A0) or a combination of different (abbreviated) elements.
Up to 100 portfolio points can be achieved in the module. The conversion into grades is based on the following table:
Portfolio points | Grade
more than or equal to 95 1.0
more than or equal to 90 1.3
more than or equal to 85 1.7
more than or equal to 80 2.0
more than or equal to 75 2.3
more than or equal to 70 2.7
more than or equal to 65 3.0
more than or equal to 60 3.3
more than or equal to 55 3.7
more than or equal to 50 4.0
less than 50 5.0
Up to 100 portfolio points can be achieved in the module. The conversion into grades is based on the following table:
Portfolio points | Grade
more than or equal to 95 1.0
more than or equal to 90 1.3
more than or equal to 85 1.7
more than or equal to 80 2.0
more than or equal to 75 2.3
more than or equal to 70 2.7
more than or equal to 65 3.0
more than or equal to 60 3.3
more than or equal to 55 3.7
more than or equal to 50 4.0
less than 50 5.0
Duration of the module
The following number of semesters is estimated for taking and completing the module: 1 semester(s).
This module can be started in the following semesters: Winter semester.
Maximum number of participants
This module is not limited to a number of students.
Registration procedures
Registration with ISIS (Information System for Instructors and Students) is required during the 1st week of lectures. The link to the course can be found at https://www.medtech.tu-berlin.de/menue/studium_und_lehre/module/.
Registration for the exam via the MTS is necessary.
Registration for the exam via the MTS is necessary.
Recommended reading, lecture notes
Lecture notes
unavailable
Electronic lecture notes
available – Wird im Laufe des Semesters via ISIS bereitgestellt
Recommended literature
- Dickhaus H, Knaup-Gregori: Biomedizinische Technik Band 6 Medizinische Informatik; De Gruyter Verlag; Berlin; 2015
- DIN EN ISO 14155, Klinische Prüfung von Medizinprodukten an Menschen
- Dössel, O.: Bildgebende Verfahren in der Medizin; Springer-Verlag, 2000
- Dössel O, Buzug M: Biomedizinische Technik Band 7 Medizinische Bildgebung; De Gruyter Verlag; Berlin; 2014
- E.W. Morscher Endoprothetik. Springer, Berlin Heidelberg, New York Tokio, 1995
- F.-P. Bossert, K. Vogedes: Elektrotherapie, Licht- und Strahlentherapie, Urban & Fischer, München, 2003
- H. Edel: Fibel der Elektrodiagnostik und Elektrotherapie, 6. Auflage, Verlag Gesundheit GmbH, Berlin, 1991
- H. Hutten: Biomedizinische Technik, 4 Bände, Springer-Verlag/ Verlag TÜV Rheinland Köln;1992
- H. J. Trampisch, J. Windeler: Medizinische Statistik, Springer, Berlin, 1997
- H. Kresse: Kompendium Elektromedizin, 3. Auflage, Siemens AG, Erlangen, 1982
- Kraft M, Disselhorst-Klug C: Biomedizinische Technik Band 10 Rehabilitationstechnik; De Gruyter Verlag; Berlin; 2015
- Kraft M, Morgenstern U: Biomedizinische Technik Band 1 Faszination, Einführung, Überblick; De Gruyter Verlag; Berlin; 2014
- Lauterbach, G.: Handbuch der Kardiotechnik 4. Auflage, Urban & Fischer Verlag, 2002
- Morneburg, H.: Bildgebende Systeme für die medizinische Diagnostik; Publicis MCD Verlag, 3. Auflage 1995
- Motzkus, B.: Infusionsapparate: Testergebnisse, Medizintechnik im Krankenhaus und Praxis, de Gruyter, Berlin, 1984
- R. Kramme: Medizintechnik, Verfahren, Systeme, Informationsverarbeitung, 2. Auflage; Springer-Verlag 2002
- S. Silbernagl, A. Despopoulos: Taschenatlas der Physiologie; Thieme Verlag; Stuttgart; 1991
- W. Jenrich: Grundlagen der Elektrotherapie; Urban & Fischer, München, 2000
- Werner J: Biomedizinische Technik Band 9 Automatisierte Therapiesysteme; De Gruyter Verlag; Berlin; 2014
- Wintermantel E, Suk-Woo Ha (1998) Biokompatible Werkstoffe und Bauweisen, Implantate für Medizin und Umwelt, 2. Aufl. Springer, Berlin Heidelberg New York Tokio
Assigned programs
This module version is used in the following programs:
| Program / program version | Semester(s) | Curriculum component |
|---|---|---|
| Biomedical Engineering StuPO 2018 | WS 2026/27 | 1. Pflichtmodule |
| Computational Engineering Science (Informationstechnik im Maschinenwesen) StuPO 2018 | WS 2026/27 | 6. Schwerpunkte › 6.3 Konstruktion und Fertigung › 6.3.3 Produktorientierte Fächer |
| Computational Engineering Science (Informationstechnik im Maschinenwesen) StuPO 2018 (17.01.2018) | WS 2026/27 | 4. Profilbereich › 4.2 Profilbereich: Konstruktion und Fertigung › 4.2c Produktorientierte Fächer |
| Human Factors StuPO 2018 | WS 2026/27 | V. Wahlpflichtmodule zum Erwerb von Vertiefungswissen (18 LP) › V.1 Domänenbezogene Vertiefungen |
| Industrial Engineering and Management Industrial Engineering and Management (M. Sc.) - StuPO 2015 | WS 2026/27 | Ingenieurwissenschaftliche Studienrichtungen/Engineering Majors › Gesundheitstechnik/Healthcare Technology (GT) › Gesundheitstechnik/Healthcare Technology (Pflicht/Compulsory) |
| Industrial Engineering and Management Industrial Engineering and Management (M. Sc.) - StuPO 2026 | WS 2026/27 | Engineering Sciences / Specialization › Healthcare Technology › Healthcare Technology (Compulsory) |
| Material Science and Engineering StuPO 2009 | WS 2026/27 | Vertiefungsmodule |
| Material Science and Engineering Material Science and Engineering (M. Sc.) - StuPO 2024 | WS 2026/27 | Fachzspezifische Wahlpflicht › Natur- und ingenieurwissenschaftliche Aspekte der Materialwissenschaft und Werkstofftechnik › Sonstige Module |
| Mechanical Engineering StuPO 2017 | WS 2026/27 | Wahlpflichtmodule › Schwerpunktmodule › Produktorientierung › Medizintechnik |
| Mechanical Engineering StuPO 2017 | WS 2026/27 | Wahlpflichtmodule › Profilmodule › Produkte |
| Patent Engineering StuPO 2015 | WS 2026/27 | 2.2. Ingenieurwissenschaftliche Profilmodule › 2.2.3. Produkte |
| Sociology and Technology Studies StuPO 2014 (7. Mai 2014) | WS 2026/27 | Technisches Fach › Gesundheitstechnologie und Krankenhausmanagement › Vertiefungsbereich 1 - Medizintechnik |
Miscellaneous
Not specified