Medical Engineering 2Module description #50789 / Version 6
- 6 CP
- Portfolio examination
- Graded
- Summer semester
- German
This module description is not valid in the current semester (Winter semester 2026/27).
Current version (v7)
| Module / Version | #50789 / #6 |
|---|---|
| Validity | Summer semester 2025 – Winter semester 2025/26 |
| Available language(s) | English, German |
| Credit points | 6 |
| Person responsible for the module | Kraft, Marc |
| Grading | Graded |
| Exam format | Portfolio examination |
| Language(s) of instruction | German |
Affiliation
| Faculty | Fakultät V |
|---|---|
| Institute | Institut für Maschinenkonstruktion und Systemtechnik (IMS) |
| Academic chair | 35351600 FG Medizintechnik |
Contact
| Office | SG 11 |
|---|---|
| Contact person | Kraft, Marc |
| E-mail address | medtech-TB-lehre@win.tu-berlin.de |
| Website | https://www.tu.berlin/medtech/studium-lehre/lehrveranstaltungen/sommersemester/medizintechnik-2 |
Learning outcomes
Graduates of this module learn the basics of the function, design, development and use of other important medical devices and instruments for diagnosis and therapy using selected examples.
They will be familiar with their technical implementation, taking into account the special safety aspects of the interaction of technical systems with the human body.
The historical development of the systems and procedures as well as their current social significance in an economic and ecological context will be explained.
The aim is to make participants aware of the relevance of sustainable medical device development (over the entire product life cycle) and to train them in the ethical and responsible use of resources and patients.
They will be familiar with their technical implementation, taking into account the special safety aspects of the interaction of technical systems with the human body.
The historical development of the systems and procedures as well as their current social significance in an economic and ecological context will be explained.
The aim is to make participants aware of the relevance of sustainable medical device development (over the entire product life cycle) and to train them in the ethical and responsible use of resources and patients.
Content
- Rehabilitation aids (overview)
- Infusion technology
- Blood pressure measurement technology
- Blood purification procedures
- Blood gas analysis and cytometry
- Cardiac support therapy
- Functional electrical stimulation
- Defibrillators
- Electrotherapy
- Laser therapy
- Clinical evaluation
- Extracorporeal shock wave lithotripsy
- Interventional cardiology
- Vascular implants
- Pancreas and liver replacement
- Pulmonary function diagnostics
- Ventilation and anesthesia
- Clinical laboratory
- In-vitro diagnostics equipment
- Infusion technology
- Blood pressure measurement technology
- Blood purification procedures
- Blood gas analysis and cytometry
- Cardiac support therapy
- Functional electrical stimulation
- Defibrillators
- Electrotherapy
- Laser therapy
- Clinical evaluation
- Extracorporeal shock wave lithotripsy
- Interventional cardiology
- Vascular implants
- Pancreas and liver replacement
- Pulmonary function diagnostics
- Ventilation and anesthesia
- Clinical laboratory
- In-vitro diagnostics equipment
Module components
Compulsory ares
The following courses are mandatory for this module:
| Courses | Type | Number | Frequency | Language | Hours per week | Course catalog |
|---|---|---|---|---|---|---|
| Medizintechnik 2 | Lecture | Summer semester | [de] | 4 | ISIS |
Workload and credit points
Medizintechnik 2 (Lecture)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Attendance | 15 | 4 h | 60 h |
| Preparation/follow-up | 15 | 8 h | 120 h |
| 180 h | |||
The workload of the module adds up to 180 hours. The module therefore comprises 6 credit points.
Description of teaching and learning methods
Knowledge is primarily imparted in lectures using practical examples and demonstrations. The knowledge imparted is deepened and applied independently through active participation in research-relevant topics.
Requirements for participation and examination
Desirable prerequisites for participation in the courses:
Very good knowledge of German
Medical Engineering 1
Basic medical science for engineers
Basic knowledge of chemistry and physics
Medical Engineering 1
Basic medical science for engineers
Basic knowledge of chemistry and physics
Mandatory requirements for the module examination registration:
This module has no examination requirements.
Completion of the module
| Grading | Graded |
|---|---|
| Exam format | Portfolio examination |
| Type of portfolio examination | 100 points in total |
| Language | German |
Test elements
| Name | Points/Weight | Category | Duration/Extent |
|---|---|---|---|
| Written exam | 85 | written | 59 minutes |
| Semester task | 15 | practical | Preparation and presentation of the semester task |
Exam description
The examination consists of a presentation given in groups of three during the semester as part of a lecture, as well as a written test at the end of the semester.
Up to 100 portfolio points can be achieved in the module. The conversion into grades is based on the following table:
Portfolio points Grade
more than or equal to 95 1.0
more than or equal to 90 1.3
more than or equal to 85 1.7
more than or equal to 80 2.0
more than or equal to 75 2.3
more than or equal to 70 2.7
more than or equal to 65 3.0
more than or equal to 60 3.3
more than or equal to 55 3.7
more than or equal to 50 4.0
less than 50 5.0
Up to 100 portfolio points can be achieved in the module. The conversion into grades is based on the following table:
Portfolio points Grade
more than or equal to 95 1.0
more than or equal to 90 1.3
more than or equal to 85 1.7
more than or equal to 80 2.0
more than or equal to 75 2.3
more than or equal to 70 2.7
more than or equal to 65 3.0
more than or equal to 60 3.3
more than or equal to 55 3.7
more than or equal to 50 4.0
less than 50 5.0
Duration of the module
The following number of semesters is estimated for taking and completing the module: 1 semester(s).
This module can be started in the following semesters: Summer semester.
Maximum number of participants
This module is not limited to a number of students.
Registration procedures
Registration with ISIS (Information System for Instructors and Students) is required during the 1st week of class. The link to the course can be found at https://www.tu.berlin/medtech/studium-lehre/lehrveranstaltungen.
Registration for the exam via the MTS is necessary.
Registration for the exam via the MTS is necessary.
Recommended reading, lecture notes
Lecture notes
unavailable
Electronic lecture notes
available – Will be provided via ISIS during the semester
Recommended literature
- Dickhaus H, Knaup-Gregori P: Biomedizinische Technik Band 6 Medizinische Informatik; De Gruyter Verlag; Berlin; 2015
- DIN EN ISO 14155, Klinische Prüfung von Medizinprodukten an Menschen
- Dössel, O.: Bildgebende Verfahren in der Medizin; Springer-Verlag, 2000
- Dössel O, Buzug M: Biomedizinische Technik Band 7 Medizinische Bildgebung; De Gruyter Verlag; Berlin; 2014
- E.W. Morscher Endoprothetik. Springer, Berlin Heidelberg, New York Tokio, 1995
- F.-P. Bossert, K. Vogedes: Elektrotherapie, Licht- und Strahlentherapie, Urban & Fischer, München, 2003
- H. Edel: Fibel der Elektrodiagnostik und Elektrotherapie, 6. Auflage, Verlag Gesundheit GmbH, Berlin, 1991
- H. Hutten: Biomedizinische Technik, 4 Bände, Springer-Verlag/ Verlag TÜV Rheinland Köln;1992
- H. J. Trampisch, J. Windeler: Medizinische Statistik, Springer, Berlin, 1997
- H. Kresse: Kompendium Elektromedizin, 3. Auflage, Siemens AG, Erlangen, 1982
- Kraft M, Disselhorst-Klug C: Biomedizinische Technik Band 10 Rehabilitationstechnik; De Gruyter Verlag; Berlin; 2015
- Kraft M, Morgenstern U: Biomedizinische Technik Band 1 Faszination, Einführung, Überblick; De Gruyter Verlag; Berlin; 2014
- Lauterbach, G.: Handbuch der Kardiotechnik 4. Auflage, Urban & Fischer Verlag, 2002
- Morneburg, H.: Bildgebende Systeme für die medizinische Diagnostik; Publicis MCD Verlag, 3. Auflage 1995
- Motzkus, B.: Infusionsapparate: Testergebnisse, Medizintechnik im Krankenhaus und Praxis, de Gruyter, Berlin, 1984
- R. Kramme: Medizintechnik, Verfahren, Systeme, Informationsverarbeitung, 2. Auflage; Springer-Verlag 2002
- S. Silbernagl, A. Despopoulos: Taschenatlas der Physiologie; Thieme Verlag; Stuttgart; 1991
- W. Jenrich: Grundlagen der Elektrotherapie; Urban & Fischer, München, 2000
- Werner, J: Biomedizinische Technik Band 9 Automatisierte Therapiesysteme; De Gruyter Verlag; Berlin; 2014
- Wintermantel E, Suk-Woo Ha (1998) Biokompatible Werkstoffe und Bauweisen, Implantate für Medizin und Umwelt, 2. Aufl. Springer, Berlin Heidelberg New York Tokio
Assigned programs
This module version is used in the following programs:
| Program / program version | Semester(s) | Curriculum component |
|---|---|---|
| Biomedical Engineering StuPO 2018 | SS 2025 | 1. Pflichtmodule |
| WS 2025/26 | 1. Pflichtmodule | |
| Computational Engineering Science (Informationstechnik im Maschinenwesen) StuPO 2018 (17.01.2018) | SS 2025 | 4. Profilbereich › 4.2 Profilbereich: Konstruktion und Fertigung › 4.2c Produktorientierte Fächer |
| WS 2025/26 | 4. Profilbereich › 4.2 Profilbereich: Konstruktion und Fertigung › 4.2c Produktorientierte Fächer | |
| Human Factors StuPO 2018 | SS 2025 | V. Wahlpflichtmodule zum Erwerb von Vertiefungswissen (18 LP) › V.1 Domänenbezogene Vertiefungen |
| WS 2025/26 | V. Wahlpflichtmodule zum Erwerb von Vertiefungswissen (18 LP) › V.1 Domänenbezogene Vertiefungen | |
| Industrial Engineering and Management Industrial Engineering and Management (M. Sc.) - StuPO 2015 | SS 2025 | Ingenieurwissenschaftliche Studienrichtungen/Engineering Majors › Gesundheitstechnik/Healthcare Technology (GT) › Gesundheitstechnik/Healthcare Technology (Wahlpflicht/Compulsory-Elective) |
| WS 2025/26 | Ingenieurwissenschaftliche Studienrichtungen/Engineering Majors › Gesundheitstechnik/Healthcare Technology (GT) › Gesundheitstechnik/Healthcare Technology (Wahlpflicht/Compulsory-Elective) | |
| Material Science and Engineering StuPO 2009 | SS 2025 | Vertiefungsmodule |
| WS 2025/26 | Vertiefungsmodule | |
| Material Science and Engineering Material Science and Engineering (M. Sc.) - StuPO 2024 | SS 2025 | Fachzspezifische Wahlpflicht › Natur- und ingenieurwissenschaftliche Aspekte der Materialwissenschaft und Werkstofftechnik › Sonstige Module |
| WS 2025/26 | Fachzspezifische Wahlpflicht › Natur- und ingenieurwissenschaftliche Aspekte der Materialwissenschaft und Werkstofftechnik › Sonstige Module | |
| Mechanical Engineering StuPO 2017 | SS 2025 | Wahlpflichtmodule › Profilmodule › Produkte |
| WS 2025/26 | Wahlpflichtmodule › Profilmodule › Produkte | |
| Patent Engineering StuPO 2015 | SS 2025 | 2.2. Ingenieurwissenschaftliche Profilmodule › 2.2.3. Produkte |
| WS 2025/26 | 2.2. Ingenieurwissenschaftliche Profilmodule › 2.2.3. Produkte | |
| Sociology and Technology Studies StuPO 2014 (7. Mai 2014) | SS 2025 | Technisches Fach › Gesundheitstechnologie und Krankenhausmanagement › Vertiefungsbereich 1 - Medizintechnik |
| WS 2025/26 | Technisches Fach › Gesundheitstechnologie und Krankenhausmanagement › Vertiefungsbereich 1 - Medizintechnik |
Miscellaneous
Not specified