Rehabilitation Engineering 1Module description #50792 / Version 8
- 6 CP
- Portfolio examination
- Graded
- Winter semester
- German
| Module / Version | #50792 / #8 |
|---|---|
| Validity | Since Summer semester 2026 |
| Available language(s) | English, German |
| Credit points | 6 |
| Person responsible for the module | Kraft, Marc |
| Grading | Graded |
| Exam format | Portfolio examination |
| Language(s) of instruction | German |
Affiliation
| Faculty | Fakultät V |
|---|---|
| Institute | Institut für Maschinenkonstruktion und Systemtechnik (IMS) |
| Academic chair | 35351600 FG Medizintechnik |
Contact
| Office | SG 11 |
|---|---|
| Contact person | Kraft, Marc |
| E-mail address | medtech-TB-lehre@win.tu-berlin.de |
| Website | https://www.tu.berlin/medtech/studium-lehre/lehrveranstaltungen/einfuehrung-in-die-rehabilitationstechnik-i |
Learning outcomes
Graduates of this module learn the basics of the function, design, development and use of a fundamental part of medical devices and aids for rehabilitation using selected examples.
They are familiar with their technical implementation, taking into account the special safety aspects of the interaction of technical systems with the human body.
The content is deepened in practical group exercises and examples of working and management techniques are applied.
They are familiar with their technical implementation, taking into account the special safety aspects of the interaction of technical systems with the human body.
The content is deepened in practical group exercises and examples of working and management techniques are applied.
Content
- Definition of an aid
- Legislation
- List of medical aids
- Requirements for assistive products
- Safety of assistive products and standard test methods
- Biomechanics of the spine, upper and lower extremities
- Training and assistance systems
- Ambulances
- Hearing, vision and speech aids
- Legislation
- List of medical aids
- Requirements for assistive products
- Safety of assistive products and standard test methods
- Biomechanics of the spine, upper and lower extremities
- Training and assistance systems
- Ambulances
- Hearing, vision and speech aids
Module components
Compulsory area
The following courses are mandatory for this module:
| Courses | Type | Number | Frequency | Language | Hours per week | Course catalog |
|---|---|---|---|---|---|---|
| Rehabilitationstechnik 1 | Lecture | Winter semester | [de] | 2 | WS 2026/27 (1) ISIS | |
| Rehabilitationstechnik 1 | Exercise | Winter semester | [de] | 2 | ISIS |
Courses in the course catalog
Courses created from the teaching units of this module.
Winter semester 2026/27 (1)
Rehabilitationstechnik 1 (Lecture) 1
- Rehabilitationstechnik 1 (Vorlesung) Standardtermin
Workload and credit points
Rehabilitationstechnik 1 (Lecture)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Attendance | 15 | 2 h | 30 h |
| Preparation/follow-up | 15 | 4 h | 60 h |
| 90 h | |||
Rehabilitationstechnik 1 (Exercise)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Attendance | 15 | 2 h | 30 h |
| Preparation/follow-up | 15 | 4 h | 60 h |
| 90 h | |||
The workload of the module adds up to 180 hours. The module therefore comprises 6 credit points.
Description of teaching and learning methods
Lectures with supporting demonstrations of assistive devices and video presentations.
Practical group exercises on selected lecture topics and on analyzing the care of impaired people with technical aids deepen the knowledge imparted in the lectures.
In the working groups, short tests are to be written as an introduction and written protocols or posters are to be prepared as a follow-up.
Practical group exercises on selected lecture topics and on analyzing the care of impaired people with technical aids deepen the knowledge imparted in the lectures.
In the working groups, short tests are to be written as an introduction and written protocols or posters are to be prepared as a follow-up.
Requirements for participation and examination
Desirable prerequisites for participation in the courses:
Very good knowledge of German
Basic medical science for engineers
Basic medical science for engineers
Mandatory requirements for the module examination registration:
This module has no examination requirements.
Completion of the module
| Grading | Graded |
|---|---|
| Exam format | Portfolio examination |
| Type of portfolio examination | 100 points in total |
| Language | German |
Test elements
| Name | Points/Weight | Category | Duration/Extent |
|---|---|---|---|
| Test at the beginning of the practical exercises | 10 | written | 10 minutes each |
| Exercise follow-up (posters, protocols, etc.) | 45 | written | see exam description |
| Oral consultation | 45 | oral | 30 minutes |
Exam description
The performance assessment consists of three parts. The tests are intended to familiarize students with the necessary content taught in the lectures prior to the exercises.
In the exercise follow-up, protocols (approx. 10 pages), posters or presentations (approx. 15 minutes) are prepared in order to scientifically evaluate the exercise.
These semester-accompanying activities may consist of several elements (2-3), which may occur in varying numbers during the semester. Attention is paid to a homogeneous distribution so that the scope is comparable in each semester.
To calculate the percentage of each element, use the following formula A= percentage of the overall grade B= number of elements. Percentage of overall grade for individual element = A/B
The oral part comprises a 30-minute discussion of the lecture content.
Up to 1000 portfolio points can be achieved in the module. The conversion into grades is based on the following table:
Portfolio points | Grade
more than or equal to 950 1.0
more than or equal to 900 1.3
more than or equal to 850 1.7
more than or equal to 800 2.0
more than or equal to 750 2.3
more than or equal to 700 2.7
more than or equal to 650 3.0
more than or equal to 600 3.3
more than or equal to 550 3.7
more than or equal to 500 4.0
less than 500 5.0
In the exercise follow-up, protocols (approx. 10 pages), posters or presentations (approx. 15 minutes) are prepared in order to scientifically evaluate the exercise.
These semester-accompanying activities may consist of several elements (2-3), which may occur in varying numbers during the semester. Attention is paid to a homogeneous distribution so that the scope is comparable in each semester.
To calculate the percentage of each element, use the following formula A= percentage of the overall grade B= number of elements. Percentage of overall grade for individual element = A/B
The oral part comprises a 30-minute discussion of the lecture content.
Up to 1000 portfolio points can be achieved in the module. The conversion into grades is based on the following table:
Portfolio points | Grade
more than or equal to 950 1.0
more than or equal to 900 1.3
more than or equal to 850 1.7
more than or equal to 800 2.0
more than or equal to 750 2.3
more than or equal to 700 2.7
more than or equal to 650 3.0
more than or equal to 600 3.3
more than or equal to 550 3.7
more than or equal to 500 4.0
less than 500 5.0
Duration of the module
The following number of semesters is estimated for taking and completing the module: 1 semester(s).
This module can be started in the following semesters: Winter semester.
Maximum number of participants
The maximum capacity of participants is 18.
Registration procedures
Registration in ISIS (Information System for Instructors and Students) is required during the first week of class. The link to the course can be found at https://www.tu.berlin/medtech/studium-lehre/lehrveranstaltungen.
Registration for the exam via the MTS is necessary.
Registration for the exam via the MTS is necessary.
Recommended reading, lecture notes
Lecture notes
unavailable
Electronic lecture notes
available – Will be provided via ISIS during the semester
Recommended literature
- Brinckmann, P.: Orthopädische Biomechanik, Georg Thieme Verlag, Stuttgart, New York, 2000
- Gertrude Mensch und Wieland Kaphingst: Physiotherapie und Prothetik nach Amputation der unteren Extremität, Springer Verlag, Berlin; Heidelberg, 1999
- Hilfsmittelverzeichnis der Spitzenverbände der Krankenkassen
- IKK-Bundesverband: Verfahrenshandbuch Strukturgegebenheiten und Prozessabläufe im Hilfsmittel- und Pflegehilfsmittelbereich
- J. Perry: Ganganalyse, Norm und Pathologie des Gehens, 1. Auflage, Urban & Fischer Verlag, München, Jena, 2003
- Kraft M, Disselhorst-Klug C: Biomedizinische Technik Band 10 Rehabilitationstechnik; De Gruyter Verlag; Berlin; 2015
- Kraft M, Morgenstern U: Biomedizinische Technik Band 1 Faszination, Einführung, Überblick; De Gruyter Verlag; Berlin; 2014
- M. Näder und H. G. Näder: Otto Bock, Prothesen-Kompendien, Prothesen für die obere und untere Extremität, Schiele & Schön, Berlin
- Publikationen diverser Hersteller technischer Hilfsmittel für Behinderte
- Rene Baumgartner und Pierre Botta: Amputation und Prothesenversorgung der oberen Extremität, Enke Verlag, Stuttgart, 1997
- Rene Baumgartner und Pierre Botta: Amputation und Prothesenversorgung der unteren Extremität, 2. Aufl., Enke Verlag, Stuttgart, 1995
- S. Heim und W. Kaphingst: Prothetik für Auszubildende der Orthopädietechnik, Bundesfachschule für Orthopädie-Technik, BIV/Verlag für Orthopädietechnik, 1991
Assigned programs
This module version is used in the following programs:
| Program / program version | Semester(s) | Curriculum component |
|---|---|---|
| Biomedical Engineering StuPO 2018 | SS 2026 | 2. Wahlpflichtmodule › 2.1 Medizintechnische Profile › 2.1.2 Rehabilitationstechnik |
| WS 2026/27 | 2. Wahlpflichtmodule › 2.1 Medizintechnische Profile › 2.1.2 Rehabilitationstechnik | |
| Computational Engineering Science (Informationstechnik im Maschinenwesen) StuPO 2018 | SS 2026 | 6. Schwerpunkte › 6.3 Konstruktion und Fertigung › 6.3.3 Produktorientierte Fächer |
| WS 2026/27 | 6. Schwerpunkte › 6.3 Konstruktion und Fertigung › 6.3.3 Produktorientierte Fächer | |
| Computational Engineering Science (Informationstechnik im Maschinenwesen) StuPO 2018 (17.01.2018) | SS 2026 | 4. Profilbereich › 4.2 Profilbereich: Konstruktion und Fertigung › 4.2c Produktorientierte Fächer |
| WS 2026/27 | 4. Profilbereich › 4.2 Profilbereich: Konstruktion und Fertigung › 4.2c Produktorientierte Fächer | |
| Industrial Engineering and Management Industrial Engineering and Management (M. Sc.) - StuPO 2015 | WS 2026/27 | Ingenieurwissenschaftliche Studienrichtungen/Engineering Majors › Gesundheitstechnik/Healthcare Technology (GT) › Gesundheitstechnik/Healthcare Technology (Wahlpflicht/Compulsory-Elective) |
| Industrial Engineering and Management Industrial Engineering and Management (M. Sc.) - StuPO 2026 | WS 2026/27 | Engineering Sciences / Specialization › Healthcare Technology › Healthcare Technology (Compulsory Electives) |
| Mechanical Engineering StuPO 2017 | WS 2026/27 | Wahlpflichtmodule › Schwerpunktmodule › Produktorientierung › Medizintechnik |
| Mechanical Engineering StuPO 2017 | WS 2026/27 | Wahlpflichtmodule › Profilmodule › Produkte |
| Patent Engineering StuPO 2015 | SS 2026 | 2.2. Ingenieurwissenschaftliche Profilmodule › 2.2.3. Produkte |
| WS 2026/27 | 2.2. Ingenieurwissenschaftliche Profilmodule › 2.2.3. Produkte | |
| Sociology and Technology Studies StuPO 2014 (7. Mai 2014) | SS 2026 | Technisches Fach › Gesundheitstechnologie und Krankenhausmanagement › Vertiefungsbereich 1 - Medizintechnik |
| WS 2026/27 | Technisches Fach › Gesundheitstechnologie und Krankenhausmanagement › Vertiefungsbereich 1 - Medizintechnik |
Miscellaneous
The maximum number of participants is 18 (due to the experimental exercises).
The following priorities apply to enrolments above this number:
1. students for whom the subject is a compulsory subject
2. students for whom the subject is an elective subject
3. students who would like to include the subject in the free elective area
4. students who wish to take the subject as an additional course of study
The following priorities apply to enrolments above this number:
1. students for whom the subject is a compulsory subject
2. students for whom the subject is an elective subject
3. students who would like to include the subject in the free elective area
4. students who wish to take the subject as an additional course of study