Skip to content
Technische Universität Berlin Deutsch
Course catalog and module transfer system

Microphone Array ProjectModule description #50800 / Version 3

← Module page Deutsche Fassung
Module / Version#50800 / #3
ValiditySince Winter semester 2024/25
Available language(s)English, German
Credit points6
Person responsible for the moduleHerold, Gert
GradingGraded
Exam formatPortfolio examination
Language(s) of instructionEnglish

Affiliation

FacultyFakultät V
InstituteInstitut für Strömungsmechanik und Technische Akustik
Academic chair35311500 FG Technische Akustik

Contact

OfficeTA 7
Contact personHerold, Gert
E-mail addressta7@akustik.tu-berlin.de
Websitehttps://www.akustik.tu-berlin.de

Learning outcomes

General knowledge about microphone array measurements:
- Understanding of hardware setup and measured quantities
- Knowledge of possible applications

Deeper understanding of acoustic signal processing, particularly:
- Acoustic beamforming methods in the time domain and in the frequency domain
- Dealing with noise, stationary, and/or moving sources
- Incorporation of sound propagation models
- Recognizing limitations and method-intrinsic artifacts

Practical know-how regarding implementation and evaluation of array measurements:
- Design & scheduling of a measurement campaign
- Realizing and documenting the experiments
- Data evaluation using microphone array signal processing software

Content

1.) 3 weeks: Learning subject-specific fundamentals with exercises, initial literature research by students
2.) Formation of groups (approximately 3 students per group)
3.) 2 weeks: Development of the task definition and project timeline
4.) Registration for the (multi-modal) examination
5.) 5 weeks: Project work involving research, code implementation, two short presentations on the state of progress
6.) 2-3 weeks: Setup & execution of measurements, short progress presentation
7.) 2-3 weeks: Data analysis and preparation of results, presentation (graded)
8.) 2 weeks: Last adjustments and submission of the final report (graded)

Module components

Compulsory area

The following courses are mandatory for this module:

CoursesTypeNumberFrequencyLanguageHours per weekCourse catalog
Mikrofonarray ProjektProject0531 L 593 Winter semester[en, de]2 ISIS

Workload and credit points

Mikrofonarray Projekt (Project)

Workload descriptionMultiplierHoursTotal
Attendance152 h30 h
Pre/post processing1510 h150 h
180 h

The workload of the module adds up to 180 hours. The module therefore comprises 6 credit points.

Description of teaching and learning methods

Microphone arrays, often referred to as “acoustic cameras”, are essential tools for the spatial separation and analysis of sound sources. In this interactive course, students learn the basics of acoustic array signal processing and apply this knowledge in practical projects.

In small groups, participants develop a microphone array measurement task based on a scientific question of their own choice. This is designed, carried out, evaluated and documented under the supervision of the course instructors. The course takes place in a hybrid format, with mandatory online and on-site phases, and is divided into three parts:

1. Teaching the theoretical basics and formation of the project groups.
2. Planning and preparation of the individual measurement task in the groups.
3. Practical implementation of the measurements and analysis of the results.

In the first segment, students learn how to use specialized, freely available software for microphone array methods. This enables preliminary simulations and the evaluation of measured raw data on their own computer in the following parts.

Requirements for participation and examination

Desirable prerequisites for participation in the courses:

- Knowledge in Acoustics
- Basic programming skills

Mandatory requirements for the module examination registration:

This module has no examination requirements.

Completion of the module

GradingGraded
Exam formatPortfolio examination
Type of portfolio examination100 points in total
LanguageEnglish, German

Test elements

NamePoints/WeightCategoryDuration/Extent
Project description, concept, and schedule20writtenmax. 5 pages
Presentation of intermediate results10oralmax. 10 min
Presentation of final results30oralapprox. 10 min / person
Final report40writtenmax. 30 pages

Exam description

In this project, written group work is assessed in addition to oral presentations. Individual assessments are possible as long as the authorship is labelled in the documents.

The description, concept and schedule of the group's project are outlined in a short document. During the course of the project, the progress of the project group's work is briefly presented by a group representative on three different occasions. The results are presented in a joint final presentation. Finally, a project report is written by each group.

Duration of the module

The following number of semesters is estimated for taking and completing the module: 1 semester(s).

This module can be started in the following semesters: Winter semester.

Maximum number of participants

The maximum capacity of participants is 21.

Registration procedures

Registration: Formalities will be announced on the corresponding learning portal.

Examination: Formalities will be announced at the beginning of the course. Registration must take place before the first partial assessment.

Recommended reading, lecture notes

Lecture notes

unavailable

Electronic lecture notes

unavailable

Recommended literature

No recommended literature given

Assigned programs

This module version is used in the following programs:

Program / program versionSemester(s)Curriculum component
Engineering Science
StuPO 2007 (19.12.2007)
SS 20253. Projektmodule
WS 2025/263. Projektmodule
SS 20263. Projektmodule
Engineering Science
StuPO 2020
SS 20253. Projektmodule
WS 2025/263. Projektmodule
SS 20263. Projektmodule
WS 2026/273. Projektmodule
Mechanical Engineering
StuPO 2017
WS 2024/25Wahlpflichtmodule › Profilmodule › Mess- und Automatisierungstechnik
SS 2025Wahlpflichtmodule › Profilmodule › Mess- und Automatisierungstechnik
WS 2025/26Wahlpflichtmodule › Profilmodule › Mess- und Automatisierungstechnik
SS 2026Wahlpflichtmodule › Profilmodule › Mess- und Automatisierungstechnik
WS 2026/27Wahlpflichtmodule › Profilmodule › Mess- und Automatisierungstechnik
Vehicle Engineering
StuPO 2017
SS 20252. Profilmodule › 2.3 Ingenieurtechnische Grundlagen und Methoden
WS 2025/262. Profilmodule › 2.3 Ingenieurtechnische Grundlagen und Methoden
SS 20262. Profilmodule › 2.3 Ingenieurtechnische Grundlagen und Methoden
WS 2026/272. Profilmodule › 2.3 Ingenieurtechnische Grundlagen und Methoden

Miscellaneous

Not specified