Micro assemblyModule description #50828 / Version 3
- 6 CP
- Portfolio examination
- Graded
- Winter and summer semester
- German
| Module / Version | #50828 / #3 |
|---|---|
| Validity | Since Summer semester 2022 |
| Available language(s) | German |
| Credit points | 6 |
| Person responsible for the module | Oberschmidt, Dirk |
| Grading | Graded |
| Exam format | Portfolio examination |
| Language(s) of instruction | German |
Affiliation
| Faculty | Fakultät V |
|---|---|
| Institute | Institut für Werkzeugmaschinen und Fabrikbetrieb (IWF) |
| Academic chair | 35361700 FG Mikro- und Feingeräte |
Contact
| Office | PTZ 7 |
|---|---|
| Contact person | Not specified |
| E-mail address | dirk.oberschmidt@tu-berlin.de |
| Website | https://www.mfg.tu-berlin.de/menue/fachgebiet_mikro_und_feingeraete/ |
Learning outcomes
Nach erfolgreichem Modulabschluss besitzen die Studierenden
- Kenntnisse über Mikromontage von Baugruppen und Systemen
- Kenntnisse über die Anwendung von Mikromontageeinrichtungen der Mikrosystemtechnik und der Mikro- und Nanotechnik
- anwendungsorientierte Kenntnisse zu Mikromontageprozessen in der Messtechnik sowie der Mikro-Antriebstechnik
- Kenntnisse über Mikromontage von Baugruppen und Systemen
- Kenntnisse über die Anwendung von Mikromontageeinrichtungen der Mikrosystemtechnik und der Mikro- und Nanotechnik
- anwendungsorientierte Kenntnisse zu Mikromontageprozessen in der Messtechnik sowie der Mikro-Antriebstechnik
Content
Die Vorlesung fokussiert die anwendungsorientierte Mikromontage aus den Bereichen Mikrosystemtechnik, Messtechnik, Mikro-Antriebstechnik. Mit Bezug zu den Grundlagen konventioneller Montageeinrichtungen und -prozesse werden aktuelle Entwicklungen der Digitalisierung von Montageprozessen vermittelt. Insbesondere werden Montageprozesse der Einzelfertigung sowie der Serienfertigung gelesen, da diese die Vermittlung der grundsätzlichen Prinzipien ermöglicht.
Module components
Compulsory area
The following courses are mandatory for this module:
| Courses | Type | Number | Frequency | Language | Hours per week | Course catalog |
|---|---|---|---|---|---|---|
| Mikromontage | Lecture | Winter and summer semester | [de] | 2 | WS 2026/27 (1) ISIS | |
| Mikromontage | Exercise | Winter and summer semester | [de] | 2 | WS 2026/27 (1) ISIS |
Courses in the course catalog
Courses created from the teaching units of this module.
Winter semester 2026/27 (2)
Mikromontage (Lecture) 1
- Mikromontage (Vorlesung) Termingruppe 1
Mikromontage (Exercise) 1
- Mikromontage (Übung) Termingruppe 1
Workload and credit points
Mikromontage (Lecture)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Attendance | 15 | 2 h | 30 h |
| Pre/post processing | 15 | 4 h | 60 h |
| 90 h | |||
Mikromontage (Exercise)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Attendance | 15 | 2 h | 30 h |
| Pre/post processing | 15 | 4 h | 60 h |
| 90 h | |||
The workload of the module adds up to 180 hours. The module therefore comprises 6 credit points.
Description of teaching and learning methods
Vorlesung: Darstellung der Inhalte an Beispielen aus aktuellen Prozessen der Mikromontage in der Produktion
Requirements for participation and examination
Desirable prerequisites for participation in the courses:
Verpflichtende Voraussetzungen
1.) Sehr gute Deutschkenntnisse auf Niveau C1 in Schrift und Sprache.
2:) Erfolgreiches Bestehen der Einstiegsaufgabe zur Einordnung der ingenieurtechnischen Grundausbildung. Die Einstiegsaufgabe wird in der ersten Vorlesung des Semesters vorgestellt.
1.) Sehr gute Deutschkenntnisse auf Niveau C1 in Schrift und Sprache.
2:) Erfolgreiches Bestehen der Einstiegsaufgabe zur Einordnung der ingenieurtechnischen Grundausbildung. Die Einstiegsaufgabe wird in der ersten Vorlesung des Semesters vorgestellt.
Mandatory requirements for the module examination registration:
The examination requirements could not be retrieved.
Completion of the module
| Grading | Graded |
|---|---|
| Exam format | Portfolio examination |
| Type of portfolio examination | 100 points in total |
| Language | German |
Test elements
| Name | Points/Weight | Category | Duration/Extent |
|---|---|---|---|
| Belegarbeit | 50 | written | |
| Prüfung | 50 | flexibel |
Duration of the module
The following number of semesters is estimated for taking and completing the module: 1 semester(s).
This module can be started in the following semesters: Winter and summer semester.
Maximum number of participants
This module is not limited to a number of students.
Registration procedures
Werden in der Vorlesung organisiert.
Recommended reading, lecture notes
Lecture notes
unavailable
Electronic lecture notes
unavailable
Recommended literature
No recommended literature given
Assigned programs
This module version is used in the following programs:
| Program / program version | Semester(s) | Curriculum component |
|---|---|---|
| Biomedical Engineering StuPO 2018 | SS 2025 | 2. Wahlpflichtmodule › 2.2 Ingenieurwissenschaftliche Vertiefungen |
| WS 2025/26 | 2. Wahlpflichtmodule › 2.2 Ingenieurwissenschaftliche Vertiefungen | |
| SS 2026 | 2. Wahlpflichtmodule › 2.2 Ingenieurwissenschaftliche Vertiefungen | |
| WS 2026/27 | 2. Wahlpflichtmodule › 2.2 Ingenieurwissenschaftliche Vertiefungen | |
| Computational Engineering Science (Informationstechnik im Maschinenwesen) StuPO 2018 (17.01.2018) | SS 2025 | 4. Profilbereich › 4.2 Profilbereich: Konstruktion und Fertigung › 4.2b Produktionstechnik |
| WS 2025/26 | 4. Profilbereich › 4.2 Profilbereich: Konstruktion und Fertigung › 4.2b Produktionstechnik | |
| SS 2026 | 4. Profilbereich › 4.2 Profilbereich: Konstruktion und Fertigung › 4.2b Produktionstechnik | |
| WS 2026/27 | 4. Profilbereich › 4.2 Profilbereich: Konstruktion und Fertigung › 4.2b Produktionstechnik | |
| Engineering Science StuPO 2007 (19.12.2007) | SS 2025 | 2.3 Mechatronik › 2.3b Ergänzungsbereich |
| WS 2025/26 | 2.3 Mechatronik › 2.3b Ergänzungsbereich | |
| SS 2026 | 2.3 Mechatronik › 2.3b Ergänzungsbereich | |
| Engineering Science StuPO 2020 | SS 2025 | 2.3 Mechatronik › 2.3b Ergänzungsbereich |
| WS 2025/26 | 2.3 Mechatronik › 2.3b Ergänzungsbereich | |
| SS 2026 | 2.3 Mechatronik › 2.3b Ergänzungsbereich | |
| WS 2026/27 | 2.3 Mechatronik › 2.3b Ergänzungsbereich | |
| Mechanical Engineering StuPO 2017 | WS 2023/24 | Wahlpflichtmodule › Profilmodule › Produktion |
| SS 2024 | Wahlpflichtmodule › Profilmodule › Produktion | |
| WS 2024/25 | Wahlpflichtmodule › Kernmodule › Mikrotechnik und Mechatronik | |
| SS 2025 | Wahlpflichtmodule › Profilmodule › Produktion | |
| WS 2025/26 | Wahlpflichtmodule › Kernmodule › Mikrotechnik und Mechatronik | |
| SS 2026 | Wahlpflichtmodule › Kernmodule › Mikrotechnik und Mechatronik | |
| WS 2026/27 | Wahlpflichtmodule › Kernmodule › Mikrotechnik und Mechatronik | |
| Production Engineering StuPO 2018 (09.05.2018) | SS 2025 | 4. Profilmodule › 4.1 Produktionstechnologie |
| WS 2025/26 | 4. Profilmodule › 4.1 Produktionstechnologie | |
| SS 2026 | 4. Profilmodule › 4.1 Produktionstechnologie | |
| WS 2026/27 | 4. Profilmodule › 4.1 Produktionstechnologie |
Miscellaneous
Not specified