Skip to content
Technische Universität Berlin Deutsch
Course catalog and module transfer system

Applied Flight Mechanics and Flight ControlsModule description #50906 / Version 3

← Module page Deutsche Fassung
Module / Version#50906 / #3
ValiditySince Winter semester 2021/22
Available language(s)German
Credit points6
Person responsible for the moduleSilvestre, Flavio Jose
GradingGraded
Exam formatPortfolio examination
Language(s) of instructionEnglish

Affiliation

FacultyFakultät V
InstituteInstitut für Luft- und Raumfahrt
Academic chair35341400 FG Flugmechanik und Flugregelung

Contact

OfficeNot specified
Contact personSingh, Sutej
E-mail addressflavio.silvestre@tu-berlin.de
Websitehttps://www.fmra.tu-berlin.de/menue/lehrangebot/angewandte_flugmechanik_und_flugregelung/

Learning outcomes

The course shall give the students the opportunity to experience Flight Mechanics and Flight Control under a practical point of view. Several concepts from the fields of aircraft performance, flight dynamics and flight control are implemented in a remotely-controlled unmanned aircraft and studied in the wind tunnel and in flight tests. Examples are for instance drag polar identification, aerodynamic efficiency and load factor, thrust model, aircraft stability and determination of the aerodynamic centre, dynamic model identification, stability and control derivatives, filtering, stability and control augmentation systems as well as autopilots. The projects are carried out in small groups. In addition to the learning objectives of preparing, carrying out and evaluating the projects, the students are trained in scientific work. They learn to present results in scientific papers and to summarise them in talks. This prepares the students for later work as scientists.

Content

In this course, different methods of flight mechanics and flight control are applied. One student group works in one project. By participating in the presentations of the other groups, all students will get an insight into the projects that are carried out by the other groups during the semester. The student groups can work for example on following projects:
- Identification of the thrust model of the airplane via wind-tunnel testing
- Determination of the drag polar based on flights at different velocities
- Determination of the aerodynamic centre based on flight tests with different CG positions
- Identification of stability and control derivatives
- Implementation of a filter for the measurement of wind angles
- Implementation of a SAS for the longitudinal motion
- Implementation of a SAS for the lateral-directional motion
- Implementation of an autopilot for the longitudinal motion
- Implementation of an autopilot for the lateral-directional motion

Module components

Compulsory area

The following courses are mandatory for this module:

CoursesTypeNumberFrequencyLanguageHours per weekCourse catalog
Applied Flight Mechanics and Flight ControlsProject3534 L 10668 Summer semester[en, de]4 ISIS

Workload and credit points

Applied Flight Mechanics and Flight Controls (Project)

Workload descriptionMultiplierHoursTotal
Attendance154 h60 h
Pre/post processing158 h120 h
180 h

The workload of the module adds up to 180 hours. The module therefore comprises 6 credit points.

Description of teaching and learning methods

At the beginning of the semester, there is an introduction to the course and the projects. Subsequently, in another lecture, the flight test vehicle and the hard- and software for the processing of the projects are presented. After these first lectures, the independent group work follows. Each session has 180 minutes. At the beginning of each session, each group presents the progress of the project to all students. During the semester, lectures on scientific work and presentation techniques are held. Halfway through the semester, there is an intermediate presentation of the results of the work so far.

Requirements for participation and examination

Desirable prerequisites for participation in the courses:

At least the participation in the course Flight Mechanics I (Flight Performance) is required. Previous attendance of the modules Flight Mechanics II (Flight Dynamics), Control Theory and Flight Control is desirable.

Mandatory requirements for the module examination registration:

This module has no examination requirements.

Completion of the module

GradingGraded
Exam formatPortfolio examination
Type of portfolio examination100 points in total
LanguageEnglish, German

Test elements

NamePoints/WeightCategoryDuration/Extent
Abschlussvortrag zum Projekt35oral20 Minuten Vortrag + 5 Minuten Fragen
Kurzvortrag zum Zwischenstand (in der Hälfte des Semesters) und Teilnahme an wöchentlichen Besprechungen15oral10 Minuten Vortrag + Rückmeldung in den wöchtentlichen Besprechungen (ca. 2 Minuten pro Woche)
Wissenschaftliches Paper zum Projekt (Deutsch oder Englisch)50writtenMindestens 10 Seiten, Maximal 20 Seiten

Exam description

- A weekly project meeting takes place every week. The students report briefly on their progress at each meeting. In the midterm presentation, the students give a short talk to present their work results. (15 points)
- At the end of the semester, the students hold a talk the results. This talk has the format of a presentation at a scientific conference. The duration of the talk is 20 minutes. Afterwards, the auditorium can ask question for 5 minutes.
- At the end of the semester, the students have to write a scientific paper. A template will be provided to the students. The paper has a minimum of 10 pages and a maximum of 20 pages. (50 points)

Duration of the module

The following number of semesters is estimated for taking and completing the module: 1 semester(s).

This module can be started in the following semesters: Summer semester.

Maximum number of participants

The maximum capacity of participants is 16.

Registration procedures

Students must register in the secretary office with F5 (Christine Balder, christine.balder@tu-berlin.de) until the first lecture date. The course is limited to 16 students (first come, first serve policy).

Recommended reading, lecture notes

Lecture notes

unavailable

Electronic lecture notes

unavailable

Recommended literature

No recommended literature given

Assigned programs

This module version is used in the following programs:

Program / program versionSemester(s)Curriculum component
Aeronautics and Astronautics
StuPO 2018
SS 20252. Kernmodule › 2.5 Flugmechanik
WS 2025/262. Kernmodule › 2.5 Flugmechanik
SS 20262. Kernmodule › 2.5 Flugmechanik
WS 2026/273. Profilmodule › 3.5 Flugmechanik
Transport Systems
StuPO 2018
SS 2025B. Studienrichtungen › Luft- und Raumfahrttechnik › 4. Vertiefungs- und Anwendungsbereich
WS 2025/26B. Studienrichtungen › Luft- und Raumfahrttechnik › 4. Vertiefungs- und Anwendungsbereich
SS 2026B. Studienrichtungen › Luft- und Raumfahrttechnik › 4. Vertiefungs- und Anwendungsbereich
WS 2026/27B. Studienrichtungen › Luft- und Raumfahrttechnik › 4. Vertiefungs- und Anwendungsbereich

Miscellaneous

Not specified