Skip to content
Technische Universität Berlin Deutsch
Course catalog and module transfer system

OpenFoam for combustion process simulationsModule description #50936 / Version 1

← Module page Deutsche Fassung
Module / Version#50936 / #1
ValiditySince Winter semester 2020/21
Available language(s)English
Credit points6
Person responsible for the moduleGhani, Abdulla
GradingGraded
Exam formatOral exam
Language(s) of instructionEnglish

Affiliation

FacultyFakultät V
InstituteInstitut für Strömungsmechanik und Technische Akustik
Academic chair35312100 FG Datenanalyse und Modellierung turbulenter Strömungen

Contact

OfficeMB 1
Contact personGhani, Abdulla
E-mail addressghani@tu-berlin.de
Websitehttps://www.dmf.tu-berlin.de

Learning outcomes

At the end of the course students are able to:

- compute chemical kinetics for the initialization and validation of numerical simulations
- perform reacting flow simulations for 1D and 2D configurations
- identify required steps for simulation of complex geometried (3D) and turbulent combustion modeling
- visualize flow simulation data and postprocess essential flow features
- understand the code structure of OpenFoam® and the compilation procedure

Content

(1) Short introduction into the basic Linux commands
(2) Hand-on training for computation of chemical kinetics using Cantera
(3) Short introduction to basic OpenFoam® usage (inkl. non-reacting flow simulations)
(4) 1D and 2d reacting flow simulations: setup, run and postprocessing
(5) Comparison of compressible and inkompressible solvers; complex and simple chemistry schemes; validation of results
(6) Visualization of instantaneous and mean fields with ParaView

Module components

Not specified

Workload and credit points

Course-independent workload

Workload descriptionMultiplierHoursTotal
Course preparation130 h30 h
Daily exercises54 h20 h
Final report135 h35 h
Preparation of presentation110 h10 h
Time present at the course512 h60 h
155 h

The workload of the module adds up to 155 hours. The module therefore comprises 6 credit points.

Description of teaching and learning methods

We use a mix of
- group work and discussions
- derivations and illustrations using the whiteboard
- presentations using slides and videos
- hands-on training for simulations on students or pc-pool computers

Students will learn to present their results during presentation and work on writing skills for the final report.

Requirements for participation and examination

Desirable prerequisites for participation in the courses:

- Basic knowledge on fluid dynamics
- Basic programming skills/Linux skills

Mandatory requirements for the module examination registration:

This module has no examination requirements.

Completion of the module

GradingGraded
Exam formatOral exam
LanguageEnglish
Duration/Extentabout 30min

Duration of the module

The following number of semesters is estimated for taking and completing the module: 1 semester(s).

This module can be started in the following semesters: Winter and summer semester.

Maximum number of participants

The maximum capacity of participants is 16.

Registration procedures

Exam registration in accordance with the AllgStuPO

Recommended reading, lecture notes

Lecture notes

unavailable

Electronic lecture notes

available

Recommended literature

No recommended literature given

Assigned programs

This module version is used in the following programs:

Program / program versionSemester(s)Curriculum component
Aeronautics and Astronautics
StuPO 2018
SS 20251. Ingenieurwissenschaftliche Methoden › 1.3 Strömungsmechanik und Akustik
WS 2025/261. Ingenieurwissenschaftliche Methoden › 1.3 Strömungsmechanik und Akustik
SS 20261. Ingenieurwissenschaftliche Methoden › 1.3 Strömungsmechanik und Akustik
WS 2026/271. Ingenieurwissenschaftliche Methoden › 1.3 Strömungsmechanik und Akustik
Computational Engineering Science (Informationstechnik im Maschinenwesen)
StuPO 2018 (17.01.2018)
SS 20252. Kernbereich: Simulation und Optimierung
WS 2025/262. Kernbereich: Simulation und Optimierung
SS 20262. Kernbereich: Simulation und Optimierung
WS 2026/272. Kernbereich: Simulation und Optimierung
Engineering Science
StuPO 2007 (19.12.2007)
SS 20252.2 Strömungsmechanik › 2.2b Ergänzungsbereich
WS 2025/262.2 Strömungsmechanik › 2.2b Ergänzungsbereich
SS 20262.2 Strömungsmechanik › 2.2b Ergänzungsbereich
Engineering Science
StuPO 2020
SS 20252.1 Numerik und Simulation › 2.1b Ergänzungsbereich
WS 2025/262.2 Strömungsmechanik › 2.2b Ergänzungsbereich
SS 20262.2 Strömungsmechanik › 2.2b Ergänzungsbereich
WS 2026/272.2 Strömungsmechanik › 2.2b Ergänzungsbereich
Mechanical Engineering
StuPO 2017
WS 2023/24Wahlpflichtmodule › Profilmodule › Informationstechnische und rechnergestützte Modellierung
SS 2024Wahlpflichtmodule › Profilmodule › Informationstechnische und rechnergestützte Modellierung
WS 2024/25Wahlpflichtmodule › Profilmodule › Informationstechnische und rechnergestützte Modellierung
SS 2025Wahlpflichtmodule › Profilmodule › Informationstechnische und rechnergestützte Modellierung
WS 2025/26Wahlpflichtmodule › Profilmodule › Informationstechnische und rechnergestützte Modellierung
SS 2026Wahlpflichtmodule › Profilmodule › Informationstechnische und rechnergestützte Modellierung
WS 2026/27Wahlpflichtmodule › Profilmodule › Informationstechnische und rechnergestützte Modellierung
Technomathematics
Technomathematics (M. Sc.) - StuPO 2014
SS 2025Studienrichtungen › Physikalische Ingenieurwissenschaft › Physikalische Ingenieurwissenschaft › Thermodynamik
WS 2025/26Studienrichtungen › Physikalische Ingenieurwissenschaft › Physikalische Ingenieurwissenschaft › Thermodynamik
SS 2026Studienrichtungen › Physikalische Ingenieurwissenschaft › Physikalische Ingenieurwissenschaft › Thermodynamik
WS 2026/27Studienrichtungen › Physikalische Ingenieurwissenschaft › Physikalische Ingenieurwissenschaft › Strömungsmechanik

Miscellaneous

Not specified