Technical Research and Innovation in Student Exoskeleton development (RISE) IModule description #51022 / Version 4
- 6 CP
- Portfolio examination
- Graded
- Winter and summer semester
- German
| Module / Version | #51022 / #4 |
|---|---|
| Validity | Since Winter semester 2026/27 |
| Available language(s) | English, German |
| Credit points | 6 |
| Person responsible for the module | Schneidewind, Lukas Julius |
| Grading | Graded |
| Exam format | Portfolio examination |
| Language(s) of instruction | German |
Affiliation
| Faculty | Fakultät V |
|---|---|
| Institute | Institut für Maschinenkonstruktion und Systemtechnik (IMS) |
| Academic chair | 35351600 FG Medizintechnik |
Contact
| Office | SG 11 |
|---|---|
| Contact person | Schneidewind, Lukas Julius |
| E-mail address | medtech-TB-lehre@win.tu-berlin.de |
| Website | http://www.medtech.tu-berlin.de/menue/studium_und_lehre/module/ |
Learning outcomes
Participants acquire in-depth knowledge in the thematic area of their group upon successful completion. They apply part of the theoretical content covered during their studies to practical technical challenges.
Furthermore, participants gain skills in methodical functional analysis and conceptualization, documentation using standardized knowledge management systems, interdisciplinary collaboration with groups from other fields, and agile project management methods - exemplified by an exoskeleton subsystem.
This module is conducted in close collaboration with other technical and non-technical RISE modules.
Furthermore, participants gain skills in methodical functional analysis and conceptualization, documentation using standardized knowledge management systems, interdisciplinary collaboration with groups from other fields, and agile project management methods - exemplified by an exoskeleton subsystem.
This module is conducted in close collaboration with other technical and non-technical RISE modules.
Content
The tasks of the participants in the module range from research, conceptualization, simulation, and design to manufacturing, assembly, testing, and documentation of the functional exoskeleton. Depending on their chosen focus, participants acquire advanced skills in areas such as:
- Design with Siemens NX and Overleaf,
- Actuators and electric motors,
- Additive manufacturing,
- Electronics development with KiCAD,
- Practical fields of electrical engineering (soldering, crimping, measuring, etc.),
- Battery technology and power electronics,
- Control engineering for actuators and balance control,
- Software development with ROS2, Python, and C++,
- Industrial bus systems such as EtherCAT,
- Sensor implementation, data acquisition, and analysis,
- Simulation and analysis of biomechanical processes,
- and many other fields.
Participants can practically apply the theoretical knowledge acquired during their previous studies. Through regular coordination with the project lead as well as through reviews and retrospectives, students independently carry out development and organizational tasks in groups and present the results.
In addition, they gain insights into the organization of an interdisciplinary development project and the application of agile project management methods (SCRUM).
- Design with Siemens NX and Overleaf,
- Actuators and electric motors,
- Additive manufacturing,
- Electronics development with KiCAD,
- Practical fields of electrical engineering (soldering, crimping, measuring, etc.),
- Battery technology and power electronics,
- Control engineering for actuators and balance control,
- Software development with ROS2, Python, and C++,
- Industrial bus systems such as EtherCAT,
- Sensor implementation, data acquisition, and analysis,
- Simulation and analysis of biomechanical processes,
- and many other fields.
Participants can practically apply the theoretical knowledge acquired during their previous studies. Through regular coordination with the project lead as well as through reviews and retrospectives, students independently carry out development and organizational tasks in groups and present the results.
In addition, they gain insights into the organization of an interdisciplinary development project and the application of agile project management methods (SCRUM).
Module components
Compulsory area
The following courses are mandatory for this module:
| Courses | Type | Number | Frequency | Language | Hours per week | Course catalog |
|---|---|---|---|---|---|---|
| Studentische Exoskelettentwicklung für IngenieurInnen I (RISE) | Integrated course | 3535 L 11709 | Winter and summer semester | [de] | 4 | WS 2026/27 (1) ISIS |
Courses in the course catalog
Courses created from the teaching units of this module.
Winter semester 2026/27 (1)
Studentische Exoskelettentwicklung für IngenieurInnen I (RISE) (Integrated course) 1
- Technische studentische Exoskelettentwicklung (RISE) I (Integrierte Veranstaltung) Standardtermin 3535 L 11709
Workload and credit points
Studentische Exoskelettentwicklung für IngenieurInnen I (RISE) (Integrated course)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Attendance | 15 | 4 h | 60 h |
| Pre/post processing | 15 | 8 h | 120 h |
| 180 h | |||
The workload of the module adds up to 180 hours. The module therefore comprises 6 credit points.
Description of teaching and learning methods
As part of the module, participants develop components of an exoskeleton for paraplegics through practical project work. Based on their interests, skills, and prior experience, participants work in groups to systematically develop and implement their own concepts. The groups are organized thematically and focus on areas such as design, (power) electronics, control engineering, software development, and human-machine interaction.
Throughout the semester-long project work, regular presentations take place where project supervisors and, if applicable, external participants provide guidance and feedback on the next steps.
Experienced students may take on coordinating responsibilities within a working group or at interfaces between working groups.
Throughout the semester-long project work, regular presentations take place where project supervisors and, if applicable, external participants provide guidance and feedback on the next steps.
Experienced students may take on coordinating responsibilities within a working group or at interfaces between working groups.
Requirements for participation and examination
Desirable prerequisites for participation in the courses:
The technical challenges that arise during the further development of the exoskeleton are often based on the current state of the art. Accordingly, advanced knowledge in one or more of the aforementioned areas is desirable but not strictly required.
Depending on the knowledge level of each group, tasks may range from more complex to less complex.
In general, a willingness to work independently and collaboratively in groups is highly desirable.
Depending on the knowledge level of each group, tasks may range from more complex to less complex.
In general, a willingness to work independently and collaboratively in groups is highly desirable.
Mandatory requirements for the module examination registration:
This module has no examination requirements.
Completion of the module
| Grading | Graded |
|---|---|
| Exam format | Portfolio examination |
| Type of portfolio examination | 100 points in total |
| Language | German |
Test elements
| Name | Points/Weight | Category | Duration/Extent |
|---|---|---|---|
| Midterm presentation | 30 | oral | 5 minutes per participant |
| Final presentation | 30 | oral | 5 minutes per participant |
| Documentation as a written report | 40 | written | 5-10 pages per group member |
Exam description
Hier ist die englische Übersetzung:
In the module, up to 100 portfolio points can be achieved. The conversion to grades is carried out according to the selected grading scale.
Each individual component can earn up to 100 points, which are weighted as follows in the overall score:
Interim presentation - 30% of the total points
Final presentation - 30% of the total points
Technical documentation as a written report - 40% of the total grade
In the module, up to 100 portfolio points can be achieved. The conversion to grades is carried out according to the selected grading scale.
Each individual component can earn up to 100 points, which are weighted as follows in the overall score:
Interim presentation - 30% of the total points
Final presentation - 30% of the total points
Technical documentation as a written report - 40% of the total grade
Duration of the module
The following number of semesters is estimated for taking and completing the module: 1 semester(s).
This module can be started in the following semesters: Winter and summer semester.
Maximum number of participants
This module is not limited to a number of students.
Registration procedures
Registration for the course takes place via ISIS and must be completed during the first week of lectures.
Additionally, registration for the exam via MTS is required after group assignments have been finalized.
Additionally, registration for the exam via MTS is required after group assignments have been finalized.
Recommended reading, lecture notes
Lecture notes
unavailable
Electronic lecture notes
available
Recommended literature
- Pahl/Beitz: Konstruktionslehre: Grundlagen erfolgreicher Produktentwicklung Methoden und Anwendung, Verlag: Springer, Jahr: 2005
- J. Perry: Ganganalyse : Norm und Pathologie des Gehens, 1. Aufl. München, Verlag: Urban & Fischer, Jahr: 2003
Assigned programs
This module version is used in the following programs:
| Program / program version | Semester(s) | Curriculum component |
|---|---|---|
| Biomedical Engineering StuPO 2018 | WS 2026/27 | 2. Wahlpflichtmodule › 2.2 Ingenieurwissenschaftliche Vertiefungen |
| Computational Engineering Science (Informationstechnik im Maschinenwesen) StuPO 2018 | WS 2026/27 | 6. Schwerpunkte › 6.3 Konstruktion und Fertigung › 6.3.1 Konstruktion und Gestaltung |
| Computer Engineering Computer Engineering (B. Sc.) - StuPO 2015 | WS 2026/27 | Wahlpflichtbereich › Kataloge › Automatisierungstechnik |
| Computer Engineering Computer Engineering (M. Sc.) - StuPO 2015 | WS 2026/27 | Wahlpflichtbereich › Studiengebiet A › Medientechnik und Mensch-Maschine-Interaktion / Digital Media and Human-Computer Interaction |
| Computer Science (Informatik) Computer Science (Informatik) (M. Sc.) - StuPO 2015 | WS 2026/27 | Wahlpflichtbereich › Studiengebiet › Medientechnik und Mensch-Maschine-Interaktion / Digital Media und Human-Computer Interaction |
| Electrical Engineering Electrical Engineering (M. Sc.) - StuPO 2015 | WS 2026/27 | Wahlpflichtbereich › Studiengebiete Fak. IV › Medientechnik und Mensch-Maschine-Interaktion / Digital Media and Human-Computer Interaction |
| Engineering Science StuPO 2020 | WS 2026/27 | 3. Projektmodule |
| Engineering Science StuPO 2020 | WS 2026/27 | Wahlpflichtmodule › 6. Schwerpunkte › 6.3 Mechatronik › Wahlpflichtmodule |
| Industrial Engineering and Management Industrial Engineering and Management (M. Sc.) - StuPO 2015 | WS 2026/27 | Ingenieurwissenschaftliche Studienrichtungen/Engineering Majors › Elektrotechnik/Electrical Engineering (ET) › Elektrotechnik/Electrical Engineering (Wahlpflicht/Compulsory-Elective) › Electronics & Integrated Systems |
| Industrial Engineering and Management Industrial Engineering and Management (M. Sc.) - StuPO 2026 | WS 2026/27 | Engineering Sciences / Specialization › Healthcare Technology › Healthcare Technology (Compulsory Electives) |
| Mechanical Engineering StuPO 2017 | WS 2026/27 | Wahlpflichtmodule › Schwerpunktmodule › Produktorientierung › Medizintechnik |
| Mechanical Engineering StuPO 2017 | WS 2026/27 | Wahlpflichtmodule › Profilmodule › Informationstechnische und rechnergestützte Modellierung |
| Patent Engineering StuPO 2015 | WS 2026/27 | 2.2. Ingenieurwissenschaftliche Profilmodule › 2.2.2. Informationstechnische und rechnergestützte Modellierung |
Miscellaneous
The module has a strong project-based character and, therefore, involves close collaboration between the teams as well as with individual thesis and project work, which can also be integrated within the scope of RISE.